Bauknecht WAK 7660 Program Chart

Brand: Bauknecht

Model: WAK 7660

Category: Washing machines

Type: Program Chart

Bauknecht WAK 7660 is a washing machine that offers a variety of features to make laundry day easier. It has 16 different programs to choose from, including specific settings for cotton, synthetics, delicates, and wool. The machine also features a delay start option, allowing you to set the wash cycle to begin at a later time. Additionally, the WAK 7660 is equipped with a number of safety functions, such as a water leak prevention system and a child lock.

GB WAK 7660 PROGRAMME CHART

5019 401 05321

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

M0501

- tested and approved by The Woolmark Company -

Programme

Care

Labels

Max.

load

Tempe-

rature

Type of wash/

Degree of soiling

Detergent and Additives

Selectable Special Options =

❉

Max.

Spin

speed

Notes

Softener Main

wash

Pre-

wash

Start

Delay

Eco +

Pre-

wash

Intensive

Rinse

hold

Speed

reduction

Kg °C

Start-

vorwahl

Öko +

Vor-

wäsche

Intensiv

Spülen

Spül-

stopp

Schleudern

rpm

Cotton White / Hygiene +

Kochwäsche / Hygiene +

6.0 20-95

Normally soiled bed linen, table linen and underwear, towels etc.

made of cotton and linen.

At a temperature of 80°C or more, this programme eliminates bacteria,

ensuring sanitization of your laundry. The bacteria removal efficiency has

been tested following a similar methodology to the NF EN 13697

standard of Nov. 2001.

❉

Yes

❉❉❉❉ ❉ ❉ ❉

1600

“Prewash” can be additionally selected for

heavily soiled laundry.

For temperature selection, please respect the

manufacturer's recommendation on the care

label.

Cotton Colours

Buntwäsche

6.0 40-60

Slightly to normally soiled bed linen, table linen and underwear,

towels, shirts etc. made of cotton and linen.

❉

Yes

❉❉❉❉ ❉ ❉ ❉

1600

“Prewash” can be additionally selected for

heavily soiled laundry.

Cotton Colours

Buntwäsche

5.0 20-40

Synthetics

Pflegeleicht

2.5 20-60

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of

these fibres with cotton.

❉

Yes

❉❉❉❉ ❉ ❉❉

1000

“Prewash” can be additionally selected for

heavily soiled laundry.

Daily Load

Mischwäsche

3.0 20-60

Slightly to normally soiled textiles made of cotton and/or synthetic

fibres.

❉

Yes

–

❉

––

❉❉❉

1600

In this programme the spin speed should be

adapted to the fabrics.

Quick Wash

Schnelle Wäsche

3.0 20-30

Hardly worn outer and sports clothing made of cotton, polyester,

polyamid and mixed cotton fabrics.

❉

Yes

–

❉

––

–

❉❉

1600

–

Delicate

Feinwäsche

1.5 20-40

Curtains and delicate dresses, skirts, shirts and blouses.

❉

Yes

❉❉

–

❉

–

❉❉

1000

“Prewash” can be additionally selected for

heavily soiled laundry.

Wool

Wolle

1.0 20-40

Only woollens with a felt-free finish, labelled with the woolmark and

identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark

Company for machine washable wool.

❉

Yes

–

❉

––

–

❉❉

1000

If you select “Rinse Hold” do not leave items to

soak for too long.

Dessous / Handwash

Dessous / Handwäsche

1.0 20-40

Textiles made of linen, silk, wool or viscose marked as

“handwashable”.

This programme (40°C) is tested and approved by The Woolmark

Company for handwashable wool.

This cycle is particularly suitable to treat delicate lingerie (use of a

laundry net strongly recommended).

❉

Yes

–

❉

––

–

❉❉

400

If you select “Rinse Hold” do not leave items to

soak for too long. A very gentle spin is used in

this programme.

Easy Ironing

Leicht bügeln

3.0 20-60

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of

these fibres with cotton.

❉

Yes

❉❉❉❉ ❉ ❉❉

1000

To lessen creasing, the water quantity is

increased and the clothes are spun very gently

in this programme.

Spin

Schleudern

–

6.0

–––––

❉

–– ––

❉

1600

In this programme spinning is intensive. Same as

the spin cycle in the “Cotton” programme.

Rinse & Gentle Spin

Spülen & Schonschleudern

–

1.5 20

–

❉

––

❉

–– –

❉❉

1000

Same as rinsing and spinning in the “Wool”

programme.

Rinse & Spin

Spülen & Schleudern

–

6.0 20

–

❉

––

❉

––

❉

❉❉

1600

Same as rinsing and spinning in the cotton

programmes.

Drain

Abpumpen

––– – –––

❉

–– ––– –

This programme only drains (alternative

method of terminating the programme after

“Rinse Hold” without spinning). In addition all

running programmes can be cancelled with this

programme.

The

Dynamic

Intelligence

technology always guarantees perfect results with maximum efficiency

whatever the wash load.

This washing machine is equipped

with

automatic safety functions

which detect

and diagnose faults at an early stage and react

appropriately, e.g.:

A. “Pump” indicator

B. “Water tap closed” indicator

Check your washing machine’s water

supply.

C. “Aquastop” indicator

D. “Door locked” indicator

E. “Start” button

F. “Start delay” button with time display

G. Programme sequence indicator

H. “Spin Speed Reduction” button

I. Reset button

J. Selectable programmes

K. Temperature selection button

{

H I

F K

40105321GB.fm Page 1 Tuesday, May 30, 2006 6:18 PM

Black process 45.0° 100.0 LPI

5019 401 05321

Add the detergent as described in the chapter

“Detergent and Additives” in the instructions for use.

1. Turn the

programme selector knob

to the

desired programme.

2. The

remaining time display

shows the duration

of the chosen programme (in hours and minutes),

and the lamp over the

“Start”

button flashes.

3. The

programme sequence indicator

and the

predefined spin speed indication corresponding

to the selected programme lights up.

The recommended temperature (see the

indicator) can be altered by pressing the

temperature selection button under the

temperature display.

• Wash your laundry in the desired programme

(Cotton, Synthetics), adding an appropriate

amount of chlorine bleach to the SOFTENER

chamber (close the detergent dispenser carefully).

• Immediately after end of programme, start the “Rinse

and Spin” programme to eliminate any residual bleach

smell; if you want, you can add softener.

“Eco +” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption can be achieved.

“Prewash” button

• Only for heavily soiled laundry (e.g. sand or

granular dirt). Programme duration is increased

by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without being spun: discoloration of the laundry

and additional creasing are prevented.

• This option is particularly recommended for the

programme “Synthetic” or “Delicate”.

• This function is particularly useful if you want to

postpone spinning to a later time.

Note:

The programme has reached the “Rinse

Hold” when the corresponding light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to “Drain” and press

the

“Start”

button again.

“Spin Speed Reduction” button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the

spin cycle.

• If no light goes on, the final spin is cancelled.

The water is only drained out.

CONSUMPTION DATA

Programme Temperature

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme duration

approx.**

(hours : minutes)

Cotton White

95 6.0 49

***

1.90 2:00

Cotton Colours

60 6.0 44 1.14 2:20

Cotton with “Eco +” ****

60 6.0 44 1.02 2:30

Cotton Colours

40 5.0 42 0.70 2:05

Synthetics

60 2.5 60

***

0.90 1:45

Synthetics

40 2.5 55 0.60 1:30

Daily Load

40 3.0 48 0.55 1:00

Quick Wash

30 3.0 37 0.30 0:30

Delicate

30 1.5 60 0.50 0:45

Wool

40 1.0 60 0.50 0:40

Handwash

30 1.0 45 0.40 0:35

Easy Ironing

40 3.0 60 0.60 1:30

The

consumption values

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

The

programme duration

may also vary from the chart values. The washing machine is able to allow for particular

household conditions and to adapt the programme run time accordingly.

***

To reduce the

water temperature

, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

****

Reference programme for energy label.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

USING CHLORINE BLEACH

SELECT SPECIAL OPTIONS -

The corresponding lights go on (if not

selectable: rapid flashing for 3 seconds)

With the “Start Delay” function the appliance can be run

cheaply e.g. at night, when the electricity is cheaper.

• Press the “Start Delay” button. Select the

programme start from 1 to 24 hours ahead by

pressing the button again.

• Press the

“Start”

button.

The Start Delay indicator light flashes until the

programme starts.

“Start Delay” correction.

• Before “Start” has been pressed:

The preset number of hours can be altered by

continuously pressing the “Start Delay” button.

By pressing the Start Delay button again after the

“24” setting, the time delay can be deleted again

or set again.

After “Start” has been pressed:

The preset number of hours can be reduced by

pressing the “Start Delay” button again; please

note, however, that the washing programme

starts IMMEDIATELY, as soon as you operate it

again with the Start Delay switch 01 setting.

To increase the number of hours preselected,

first turn the programme selector switch to the

“Off” position. Then set the programme and the

additional options again and select the desired

number of hours.

After you have selected the programme and eventually

the additional options, the indicator light over the

“Start”

button flashes. Turn on the tap and start the

programme by pressing the

“Start”

button. Now the

indicator light over the button goes on.

In addition, all programme phases are indicated by the

associated lights. After the end of a programme phase,

the associated indicator light goes out. Thus the

programme sequence indicator moves from left to

right across the wash, rinse and spin phases. At the end

of the programme, only the “End” indicator is still on.

As long as a washing programme is running, the lamp

lights up to show that the door cannot be opened.

When the lamp goes off, the door can be opened again.

“Start”

has been pressed, but the door is not latched,

the “Door Locked” indicator flashes for 10 seconds.

The door must be pushed shut within this time.

After the 10 seconds, the “Door Locked” indicator

goes out and the

“Start”

button flashes. The door

must then be opened and closed again and the

“Start”

button must be pressed.

“Pump”

Waste water is not pumped out. Check wether the

drain hose is kinked or the filter must be cleaned; in

the latter case refer to the Instructions for Use

(“Removing the Filter”).

“Water Tap”

The appliance has no or insufficient water supply.

Open the water tap; if the indication still lights up,

refer to the “Troubleshooting Guide" in the

Instructions for Use.

“Aquastop“

Lighting up of the Aquastop indication can be caused

by a leak in the appliance or hose. Please refer to the

“Troubleshooting Guide" in the Instructions for Use.

• The “End” indicator goes on.

1. Switch the washing machine off by turning the

programme selector to the “

”-position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue in the

same programme section during which the current

programme was interrupted. Therefore do not add

any more detergent.

1. Press the

“Start”

button to interrupt the

programme. The light flashes.

2. Select the new programme (with temperature),

any additional options and - if you wish - another

spin speed.

3. Press the

“Start”

button again to restart the

programme.

• If you are in the “Prewash” programme step, this

additional option cannot be deselected as

described (to do this see “Cancel/Reset a

running programme before the end”).

Press the

“Reset”

button for at least 2 seconds.

Any existing water is drained out before the door

can be opened.

START DELAY

PROGRAMME START

“DOOR LOCKED” INDICATOR

“TROUBLE” INDICATORS

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105321GB.fm Page 2 Tuesday, May 30, 2006 6:18 PM

Black process 45.0° 100.0 LPI

Bauknecht WAK 7660 Program Chart

Brand: Bauknecht

Model: WAK 7660

Category: Washing machines

Type: Program Chart

Download PDF

report

Bauknecht WAK 7660 Program Chart

Bauknecht WAK 7660 Program Chart

Related papers

Other documents