Aretas Sensor Networks, Inc.
877.218.6232
www.aretasworks.com
ASMX01BR 03-11-14 (001)
Customer Service Information
For parts or service information, contact your sales representative. Be sure to
provide all of the relevant information when you call or inquire online.
http://www.aretasworks.com/search_kb
The MAC number is found on the label on the side of the monitor.
Sensor Type:
MAC No:
Model No:
Aretas Sensor Networks, Inc.
877.218.6232
www.aretasworks.com
Wireless Bridge
ASMX01BR
Your bridge has been engineered and
manufactured to our high standards for
accuracy and dependability.
Please read and understand the user manual
before plugging in and using this product.
Aretas Sensor Networks
INSTRUCTION MANUAL
General Safety
Remove your Bridge from the box and check for
any visible signs of damage.
WARNING
If your product arrives damaged, place it back
in the box and call our customer support line
immediately to report your ndings.
Assembly
Your Bridge comes pre-assembled and tested
from Aretas.
• Connect the antenna to the threaded antenna
post on the side of your Bridge. Thread it on
until it is nger tight. *Do not use any tools.
Mounting
(mounting hardware not provided)
This wireless Bridge is very light and can be
mounted on a variety of surfaces.
• We suggest using a 3M Command Poster strip
to attach it to a clean, smooth, surface. If you
are mounting it to a rough, uneven surface
we suggest you use the hole located on the
mounting anges on each side of the case.
• There are two monting anges on the sides of
the case in which you can mount the bridge to
the wall.
Power Supply
Your wireless monitor comes with a 110v power
supply adapter. ASMX01PA
• Connect the provided power supply to the
monitor and then plug it in to a 110v power
supply outlet.
WARNING
• Do not attempt to modify the power supply in
any way.
• Use only the power supply cable provided with
your wireless monitor.
LAN
Connect your Bridge to the internet using an
Ethernet cable from your router to the LAN port
on the side of the Bridge.
Operation
You are now ready to use your Aretas Wireless
Bridge.
For you online data, contact your sales
representative to setup your account.
Go to http://www.aretasworks.com/search_
kb for more information about how you can
access your data and begin monitoring today.
ASMX01BR 03-11-14 (001)
Product Diagram
Basic Troubleshooting
1. Power light is not on.
Check power supply. Turn it o and on again.
2. The bridge is not sending data to the internet account.
Ensure that your router is on and all cables are connected.
3. The power light is on and the bridge is sending data to your online account. You are able to
access your account and see the data.
Congratulations, everything is working ne and you can worry about more important things.
For advanced troubleshooting please visit http://www.aretasworks.com/search_kb
POWER SUPPLY HOLE
LAN
CONNECTION
MICRO
USB
ANTENNA
-
1
-
2
-
3
-
4
