Page is loading ...
INSTRUCTION MANUAL
VEHICLE HEADREST
DEVICE MOUNT
for Apple
®
iPad
®
Product Diagram
What’s in the box?
Thank you for purchasing the Vehicle Headrest Mount for Apple iPad®!
This convenient rear-seat mount sets up in seconds! The fully-articulating
design allows you to position your iPad in landscape or portrait viewing
modes. It’s ideal for entertaining passengers in the back seat with movies,
web browsing, emails or even games. Keep your rear-seat passengers happy!
a - Headrest mounting neck
b - iPad holder
1 - Headrest attachment knobs
2 - Neck adjustment knob
3 - Neck joint
4 - Head joint
5 - 90 degree rotating head
6 - Mount stabilizer
7 - Mounting slots
8 - Mounting connectors
a
b
1
2
3
4
5
7
6
8
Connecting the iPad Holder to the Headrest Mounting Neck
Locate the (8) Mounting connectors on the (a) Headrest mounting neck. Next,
locate the (7) Mounting slots on the back of the (b) iPad holder. Fit both pieces to-
gether as shown in the picture below. To ensure a secure t, use medium pressure
to t the pieces together snugly.
Attaching the Mount to your Vehicle Headrest
Select the headrest that is best suited for your viewing needs. Loosen the (1)
Headrest attachment knobs so that they can be adjusted freely. Match them to the
metal bars on your car seat headrest neck and secure them for a tight t. Next,
tighten the (1) Headrest attachment knobs with gentle pressure until you feel the
mount become comfortable and stable.
Operating Instructions:
continued >>>
Troubleshooting
Mounting your Apple iPad
The (b) iPad holder is made to t the form of your iPad. Your iPad will snap into
the (b) iPad holder easily and be securely held in place. To remove it, apply gentle
outward pressure near either corner of your iPad.
Adjusting for an Optimal View
The Vehicle Headrest Mount for Apple iPad can be adjusted easily. There are
two points of articulation for adjusting height and viewing angle of your iPad.
First, use the (2) Neck adjustment knob to loosen the articulating points so that
they are easily adjustable.
The (3) Neck joint can be used to adjust the height of the iPad vertically, and the
(4) Head joint adjusts the viewing angle vertically. To use your iPad like a com-
puter for emails and web browsing, you can adjust the mount in a comfortable,
ergonomic position for typing.
The (6) Mount stabilizer can be used to prop against the back of your car seat for
additional support for when going over bumpy terrain.
Finally, you can adjust the landscape and portrait orientations with the (5) 90
degree rotating head.
Operating Instructions (continued):
The mount neck apparatus is very dicult to adjust.
- Please make sure that you have loosened the (2) Neck adjustment knob before
adjusting the angle of the mount.
I can’t remove the iPad holder from the Headrest mounting neck.
- Please use medium sliding pressure in the direction of the arrow on the back of
the (b) iPad holder.
The Headrest attachment knobs are dicult to adjust.
- Please make sure that you loosen the (1) Headrest attachment knobs by turning
them counter-clockwise before trying to adjust them.
Troubleshooting
Product Specications
Made to hold your Apple iPad
Universal design mounts to most vehicle headrests
Weight: 10.3 ounces
Dimensions: 9.5 x 7 x 1.75 inches.
- Please only use this product in the manner described in this manual
Cautions
©
2010 ACCESSORY POWER
All trademarks and brand names are the property of their owners
iPad is a trademark of Apple Inc. registered in the U.S. and other countries.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
/
