Accessory Power TabGRAB User manual

Brand
Accessory Power
Model
TabGRAB
Category
Holders
Type
User manual
INSTRUCTION MANUAL
TabGRAB
™
Thank you for purchasing the
Accessory Power™ USA GEAR™ TabGRAB™
Vehicle Headrest Universal Mount for Multimedia Tablets.
This convenient rear-seat mount sets up in seconds and
adjusts to any size tablet! The rotating neck allows you
to position your tablet in landscape or portrait viewing
modes. It is ideal for entertaining passengers in the back
seat with movies or web browsing.
Keep your rear-seat passengers happy!
TabGRAB
TM
What’s in the box? Product Diagram
a - Headrest mounting neck
b- TabGRAB tablet holder
1- Headrest attachment knobs
2- Neck adjustment knob
3- Neck joint
4- Head joint
5- 90
o
rotating head
6- Mount stabilizer
7- Mounting slots
8- Mounting connectors
9- Tablet sizing slots
10-Grab wings
11-Foot
a
1
2
b
3
4
5
6
8
10
11
7
9
9
Attaching the Mount to the Vehicle Headrest
Select the headrest that is best suited for your viewing needs. Loosen the (1)
Headrest attachment knobs so that they can be adjusted freely. Match them to the
metal bars on your car seat headrest neck and secure them for a tight  t. Next,
tighten the (1) Headrest attachment knobs with gentle pressure until you feel the
mount become comfortable and stable.
Operating Instructions:
Connecting the TabGRAB Tablet Holder to the Headrest Mounting Neck
Locate the (7) Mounting slots on the
(a) Headrest mounting neck. Next, locate
the (8) Mounting connectors on the back
of the (b) TabGRAB tablet holder. Fit
both pieces together as shown in the
picture below. To ensure a secure  t,
use medium pressure to  t the pieces
together snugly.
Mounting your Multimedia Tablet
The (b) TabGRAB tablet holder is adjustable to  t
many di erent sized tablets.
First, adjust the (11) Foot so that your tablet is
centered on the (b) TabGRAB tablet holder. Slide
the (11) Foot to the left or right and out of the (b)
TabGRAB tablet holder. Insert the (11) Foot into
one of the (9) Tablet sizing slots so that your tab-
let is centered on the (b) TabGRAB tablet holder.
Then adjust the (10) Grab wings by sliding them
up and out of the (b) TabGRAB tablet holder. In-
sert the (10) Grab wings into one of the (9) Tablet
sizing slots that will provide the best horizontal
t for your tablet. Slide the (10) Grab wings down
to the center of the (b) TabGRAB tablet holder.
Adjusting for an Optimal View
The TabGRAB Vehicle Headrest
Mount for Multimedia Tablets can be
easily adjusted. There are two points
of articulation for adjusting height
and viewing angle of your tablet.
First, use the (2) Neck adjustment knob
to loosen the articulating points so
that they are easily adjustable.
The (3) Neck joint can be used to
adjust the height of your tablet verti-
cally, and the (4) Head joint adjusts
the viewing angle. To use your tablet
like a computer for emails for web
browsing, you can adjust the mount
in a comfortable, ergonomic position
for typing.
The (6) Mount stabilizer can be used
to prop against the back of your car
seat for additional support when
going over rough terrain. Finally, you
can adjust the landscape and portrait
orientations with the (5) 90
o
rotating
head.
The (a) Headrest mounting neck is very di cult to adjust.
- Please make sure that you have loosened the (2) Neck adjustment knob by turn-
ing counterclockwise before adjusting the angle of the mount.
I can’t remove the (b) TabGRAB tablet holder from the (a) Headrest mounting neck.
- Please use medium sliding pressure in the direction of the arrow on the back of
the (b) TabGRAB tablet holder.
The (1) Headrest attachment knobs are di cult to adjust.
- Please make sure that you loosen the (1) Headrest attachment knobs by turning
them counter-clockwise before trying to adjust them.
The (10) Grab wings and (11) Foot won’t slide out
- Please use medium pressure when sliding the (10) Grab wings and (11) Foot out
of the (b) TabGRAB tablet holder.
Troubleshooting
Product Speci cations
Made to hold your Multimedia Tablet
Universal design mounts to most vehicle headrests
Grab wings compress to 4.5 inches and expand to 7.875 inches
Dimensions: 9.75 x 9 x 6.25 inches (24.7 x 22.8 x 15.8 cm)
Weight: 12.8 ounces (362 gm)
- Please only use this product in the manner described in this manual.
Cautions
Troubleshooting
©
2011 ACCESSORY POWER
All trademarks and brand names are the property of their owners
Troubleshooting
©
2011 ACCESSORY POWER
All trademarks and brand names are the property of their owners
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Accessory Power TabGRAB User manual

Brand
Accessory Power
Model
TabGRAB
Category
Holders
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents