Urban Bonfire S-LAKESHORE36-PEWT User guide
- Category
- Barbecues & grills
- Type
- User guide
This manual is also suitable for
LAKESHORE 36
OUTDOOR KITCHEN
Specications
Installation Manual
Care & Maintenance
Equipment Compatibility
Questions?
Watch our installation videos on our YouTube channel
or call Urban Bonre for assistance: 1 (866) 898-5354
SUMMARY
Specications .......................................................
Installation Manual ...............................................
Care & Maintenance .............................................
Equipment Compatibility ......................................
3
6
14
17
LAKESHORE 36
Specications
Utility Cabinet (21”)
Universal track system.
Grill Base Cabinet (42”)
For integration with a 36” built-in grill.
Double Side Burner Cabinet (21”)
For integration with a 12” double side burner.
Open Shelf Cabinet (24”)
With IPE hardwood slats.
*Length 132”
*Depth 29
3/4
”
Height 36
1/2
± 1”
*Includes countertop nosing.
Components
Gas and Electrical Conduits Access PointsDimensions
1
1
2
2 1
3
4
34
2'-5
3
4
"
3
4
" 1'-9" 2'-0" 1'-9" 3'-6" 1'-9"
3
4
"
10'-10
1
2
"
11'-0"
LAKESHORE 36 - A
2'-5
3
4
"
3
4
"
1'-9" 2'-0" 1'-9" 3'-6" 1'-9"
3
4
"
10'-10
1
2
"
11'-0"
LAKESHORE 36 - A
2'-4
3
4
"
3'-9" 1'-7
1
2
"
2'-0" 1'-7
1
2
"
10'-10
1
2
"
10
3
8
"
8
7
8
"
11
1
4
"
1'-7
1
2
"
2'-0"
11
1
4
"
10'-10
1
2
"
3'-9"
1'-7
1
2
"
7"
5
5
8
"
11
1
4
"
10
3
8
"
11
1
4
"
LAKESHORE 36 - B
7"
Gas and electric lines can easily be run in and out of
the kitchen using the removable access panels located
in the bottom and back of each cabinet. To run lines
from cabinet to cabinet, use the circular conduit holes
located at the top and bottom of each side.
PLEASE ENSURE THAT ALL GAS, PLUMBING AND
ELECTRICAL WORKS ARE TO CODE BY USING A
LICENSED CONTRACTOR.
Grill access for
electrical and gas
Double side burner
access for
electrical and gas
Double side burner
access for
electrical and gas
Top ViewTop View
Front ViewFront View
Grill access for
electrical and gas
*INCLUDES COUNTERTOP NOSING
*
*
3
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
Robertson #2 screwdriver
and/or drill bit
#8 screws
Leg wrench Toe kick clips
2” 8-32 Bolts
Phillips #2 head screwdriver
and/or drill bit
Metal Hacksaw 3/8 Wrench
Nuts
3” 8-32 Bolts (for 24” cabinet only)
Level Clear Silicone Wood Shim
Tools Required
Items Provided
4
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
1. Measure out installation area and mark kitchen location.
2. Remove all internal components and place cabinets upside down on a protected surface.
3. Locate boxes containing cabinet legs and toe kicks.
4. Attach legs to cabinets by screwing on clockwise.
5. Using #8 screws, install side panel sliding toe kicks to applicable end-cabinets.
Note: Do not overtighten. Keep tape on toe kick (see Fig. 1).
6. Using #8 screws, install back panel sliding toe kicks.
Note: Applicable only to cabinets with nished back-panels. Do not overtighten. Keep tape on
toe kick (see Fig. 1).
#8 screw
Fig. 1 - Self Leveling Toe Kick Assembly - BACK AND SIDE
Installation Protocol
Back and end nish panel toe kick assemblies are
attached to nish panel with 3, #8 screws (supplied). First
fasten the xed portion of the assembly and then slide
the self leveling portion into position. Use tape to hold self
leveling portion in place.
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
5
7. Place cabinets right side up so that they are standing on their legs.
8. Align cabinets into the kitchen location and attach them together using #8 screws in the
front (see Fig. 2) and 2” long 8-32 bolts in the back (see Fig. 3). For 24” cabinet, use the 3”
long 8-32 bolts provided.
Note: Cabinets without nished back panels are to be attached through the back section of
the cabinet (see Fig. 3). Cabinets with nished back panels are to be attached through the
holes on the inside of the cabinet. Do not overtighten.
Fig. 2 - Connecting Cabinets FRONTS
- Align and level cabinets
- Use 4, #8 screws (supplied) to
connect the cabinet fronts. DO NOT OVER TORQUE
WARNING: In high wind areas, cabinets should be
fastened to a xed structure.
#8 screw
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
6
Fig. 3 - Connecting Cabinets BACKS
Back of cabinets can be fastened together either from within
the cabinet cavity (when back panels are present) or from
the rear cabinet frame (when no back panels are present -
pictured).
Use 2 bolts and nuts (supplied) and tighten.
For 24” cabinet, use the 3” long 8-32 bolts provided.
bolt
nut
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
7
The side trims ll the space around your
equipment to provide a consistent nished
look.
Fasten the side trims, on both sides of
the cabinet.
Fig. 4- Installing the Side Trims
9. Install side trim to the grill base cabinet using #8 screws (see Fig. 4).
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
8
10. Level cabinets, using the adjustable legs, ensuring all legs are sitting solidly on the
ground Use the leg wrench if needed for legs on the back of the kitchen.
Note: Allow a small, consistent, slope for proper countertop drainage.
11. Installation must be done in accordance with included Dekton
®
Installation Guidelines.
(see p.13)
12. Install the toe kick clips to the front toe kicks (see Fig.5).
Install the clip by sliding it to the bracket.
Fig. 5 - Installing the Toe Kick Clip
13. Attach front toe kicks by resting the top section on the bottom lip of the cabinet and then
attaching the clips to the stainless legs (see Fig. 6).
Fig. 6 - Self Leveling Toe Kick Assembly - FRONT
Self leveling toe kicks are fastened by hanging the top portion of
the interior toe kick onto the cabinet frame and then rotating the
assembly until clips attach to adjustable cabinet legs.
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
9
14. Measure corner toe kick height and cut to size with hacksaw. Attach to the front and side
toe kicks (see Fig. 7).
15. Remove tape from back and side toe kicks, allowing front plates to slide down to meet
the ground. Adjust the legs if necessary to allow toe kicks to meet the ground.
16. Install interior components in the cabinets (waste and recycling insert, shelves, etc...)
17. Adjust the doors as necessary using hinges to maintain a consistent reveal.
Slide the corner piece into the front and side self leveling toe
kick portion.
Fig. 7 - Self Leveling Toe Kick Assembly - CORNER
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
10
Every Urban Bonre utility cabinet is equipped with our universal
track system. Numerous accessory options are available to
maximize eciency, functionality and usage of the cabinet.
Moving the Bracket Along the
Universal Track System
1. Push upwards on the front of the bracket
until the mounting screw lines up with the
wide portion of the keyhole.
2. Pull the front of the bracket inwards to free
the mounting screw from the vertical keyhole.
3. Slide the bracket towards the back of the
cabinet and pull it out of the horizontal keyhole.
To re-install the bracket in a new location,
simply reverse these steps.
Universal Track System
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com or 1 (866) 898-5354.
11
Adding BACK Finish Panels
Back nish panels are fastened from inside the
cabinet with 4, #8 screws (supplied). Ensure self
leveling toe kick assembly is attached prior to
installation.
End nish panels are fastened from inside the
cabinet with 2, #8 screws in the back and at least
3, #8 screws in the front (supplied). Ensure self
leveling toe kick assembly is attached prior to
installation.
Adding END Finish Panels
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com or 1 (866) 898-5354.
12
DEKTON
®
ULTRACOMPACT SURFACES
COUNTERTOP INSTALLATION
Installation Guidelines
1. Prepare the cabinets for countertop installation
Ensure the entire Urban Bonre outdoor kitchen system is
level. If necessary, adjust the level using the stainless steel
leveling legs.
2. Dry-t countertop pieces
Manipulate the countertop pieces gently and protect the
edges when dry-tting to avoid chipping.
Countertop pieces must be transported and installed by
two people, and must be manipulated vertically at all times.
Dry-t the countertop into place such that the countertop
is sitting appropriately for the grill cut-out, the side-burner
cut-out (if applicable) and the overhangs (front, side and
back).
4. Install the countertop
Working from left to right, apply a heavy bead of silicone
to the cabinets, and gently place the countertop on the
silicone.
5. Attach the joints together
Apply a light bead of silicone between joints and push the
two countertop pieces together gently.
Wipe off excess silicone.
All cabinets and trim kits should
be connected with screws and
bolts provided in the kitchen
installation package
Check the level of the entire
installation
Apply clear silicone to
attach the countertop
Adjust the level using the leveling legs
Inspect the package prior
to opening to ensure it
has not been damaged
during transportation.
Countertops must be
transported and installed
by two people.
3. Shim as necessary
Verify the level of the countertop.
If necessary, use wood shims to ensure the countertop is
sitting solidly on the cabinets.
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
13
Notice to Professionals
Please be aware that Urban Bonre Inc. does not provide the following services:
1. Ensuring that the design, services and products being provided by Urban Bonre Inc. or contractors comply
with applicable laws and regulations, including, without limitation, re codes and zoning regulations.
2. Determining whether the physical environment (including, without limitation, any deck), is suitable for the
design, services and products provided by Urban Bonre Inc. or contractors.
It is the Client’s full responsibility, at its sole cost, to ensure and determine the items set forth in (1) and (2) above,
and in the event that Urban Bonre Inc. is unable to complete its design or provide the services or products due
to any issues relating to (1) or (2) above, all fees payable by the Client shall remain payable, notwithstanding
that Urban Bonre Inc. may not be able to complete its services, and Client hereby agrees to indemnify and hold
harmless Urban Bonre Inc. from any liabilities relating hereto.
To prolong the life of your Urban Bonre cabinetry and to remain satised with the product, please be sure to
follow the below instructions:
1. Use the proper tools when cleaning your cabinets. Soft cloths are recommended.
2. Use alkaline, alkaline-chlorinated, or non-chloride cleaners.
3. Wipe off cleaning agents and standing water promptly. Prolonged contact will cause eventual problems.
4. DO NOT use any abrasive materials (such as steel pads, wire brushes or scrapers) on the cabinetry, as they
will scratch the surface.
5. DO NOT use any chlorides or quaternary salts on the cabinetry.
6. DO NOT use any hydrochloric acid (muriatic acid) on cabinetry.
Recommended cleaners for specic situations:
URBAN BONFIRE
TM
CABINETS MAINTENANCE GUIDE
Job
Routine cleaning
Grease & fatty acids, blood,
burnt-on foods
Grease and oil
Cleaning Agent
Soap, detergent medallion
Cameo, Talc
Any good commercial
detergent
Comments
Apply with soft cloth or sponge
--
Apply with soft cloth or sponge
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
14
Normal Maintenance
Due to its practically zero porosity, the ultra-compact Dekton
®
surface is highly resistant
to staining in day-to-day use and from chemical products, making it ideal for use as a
kitchen worktop and as a surface for other kinds of work, both inside and out.
For general cleaning, Cosentino recommends the use of neutral soap and water with a
sponge or scouring pad.
Acid cleaning products can include any of low pH or
descaling agent etc. Alkaline products include basic
cleaning agents, ammonia etc.
Solvents can include products such as universal solvent,
turpentine (white spirit), acetone, alcohol etc. Oxidants
include products such as hydrogen peroxide and diluted
bleach.
Cleaning Stubborn Stains
Stain
Grease and oil
Ink
Rust
Limescale
Wine
Tyre Rubber
Ice Cream
Resin / Nail Varnish
Coffee
Candle Wax
Asphalt
Residual Cement
Gesso
Epoxy Adhesive and Grouting
Cola
Fruit Juices
Tar
Nicotine
Cleaning Product
Alkaline Detergent / Solvent
Solvent
Acid
Acid
Alkaline Detergent / Acid
Solvent
Alkaline Detergent
Solvent
Alkaline Detergent / Acid
Solvent
Solvent
Acid
Acid
Solvent
Oxidant
Oxidant
Solvent
Solvent / Oxidant
DEKTON
®
ULTRACOMPACT SURFACES
CLEANING AND MAINTENANCE
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
15
Prevention of Knocks
Although Dekton
®
is an extremely resistant surface, knocks should be avoided in areas which are more exposed
(corners, edges, bevels etc.).
Performance in Contact with Hot Objects
Recipients such as frying pans, saucepans, casseroles and coffee makers etc. can be placed directly on the work
surface after use. Electrical apparatuses which give off heat can also be placed on the unprotected surface.
Dekton
®
is designed to withstand utensil temperatures from domestic use.*
*For Dekton
®
8 mm it is necessary to use protection for hot objects.
Precautions
• Please avoid direct constant contact between worktops and metal areas of electric griddles and hobs which
can occasionally occur due to incorrect installation.
• Avoid very high temperature direct sources of heat such as replaces, chimneys, barbeques etc.
• Avoid direct contact with a naked ame.
• Do not carry out any form of mechanical work on the surface, such as polishing.
• Avoid using metal scouring pads.
• The use of this type of product can lead to the loss of the product guarantee.
See the Dekton web page www.dekton.com for more information, cleaning methods, general maintenance and
exposure to chemical substances.
DEKTON
®
ULTRACOMPACT SURFACES
CLEANING AND MAINTENANCE
16
Watch our installation videos on our YouTube channel
or contact support@urbanbonre.com ou 1 (866) 898-5354.
URBAN BONFIRE
TM
LAKESHORE 36 EQUIPMENT COMPATIBILITY
36” Grill
(ALXE-36)
Side Burner
(AXESB-2/AXESZ)
34” Grill
(BLZ-3PRO-LP/NG)
Double Side Burner
(BLZ-SB2LTE)
36” Grill
(C2C36/C1S36/
C2SL36)
Dual Side Burner
(C1DB)
36” Grill
(BH1-36R)
Single or Double Side
Burner
(BGC132-BI)
36” Grill
(L600, L600R,
L600PS, L600PSR)
36” Grill
(LF36ATR, L36ATR,
L36TR, L36R-3)
Single (LSB1-3) or
Double (LSB2-2) Side
Burner
36” Grill
(E__36-NG /-LP)
Side Burner
(AEB121, AEB122)
36” Grill
(G_BR36-NG /-LP)
Side Burner
(AGB121, AGB122)
36” Grill
(TEBQ36___)
Single or Double Side
Burner (TESB131-C /
TESB132-C)
36” Grill
(OG36)
13” Burner
(BM13)
17
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Urban Bonfire S-LAKESHORE36-PEWT User guide
- Category
- Barbecues & grills
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
RIDGID 41608 Installation guide
-
Wolf 826405 Installation guide
-
Solo Stove SSBON User manual
-
Solo Stove SSBON User guide
-
Diamond NOW 36 U18R Installation guide
-
Sub-Zero BM13 Reference guide
-
Diamond NOW G15 SCR36 Installation guide
-
-
Alfresco AXESB-2C Installation guide
-
Coyote C1DBLP Operating instructions
