WASSERSTEIN B09YRF8G1G User manual

Brand: WASSERSTEIN

Model: B09YRF8G1G

Type: User manual

WASSERSTEIN B09YRF8G1G is a smart water sensor that can detect water leaks and alert you through its alarm indicator and the Wasserstein app. It has a wireless range of 147.6 ft and can be powered by either 2 AA batteries or a micro USB cable. The sensor is easy to set up and use, and it comes with a holder, screws, wall anchors, and a probe cable. You can customize the settings of the sensor, such as the alarm and low battery mode, through the Wasserstein app.

WASSERSTEIN B09YRF8G1G is a smart water sensor that can detect water leaks and alert you through its alarm indicator and the Wasserstein app. It has a wireless range of 147.6 ft and can be powered by either 2 AA batteries or a micro USB cable. The sensor is easy to set up and use, and it comes with a holder, screws, wall anchors, and a probe cable. You can customize the settings of the sensor, such as the alarm and low battery mode, through the Wasserstein app.

Premium Smart Water, Temperature,

and Humidity Sensor

USER MANUAL

In the Box

Parts

Page 1

1 x water sensor 1 x probe cable 1 x holder 1 x micro USB cable

2 x AA batteries 2 x screws 2 x wall anchors

holder

probe

USB cable

cable ports

water sensor

alarm indicator

Setup

Page 2

1. Mount the holder to the wall. Place one screw through the front and mount it

accordingly.

2. Click the water sensor onto the holder.

Page 3

3. Plug the probe cable into the cable port located on the water sensor.

4. Plug the USB cable into the USB port.

Page 4

5. Test the water sensor by placing the proble in a small puddle of water. If the water

sensor has been installed correctly, it will beep when it touches water.

Note: to use AA batteries instead of USB cable, twist the back of the water sensor

counterclockwise until it pops off. Then, insert two AA batteries.

Page 5

1. Twist the back of your sensor counterclockwise unil it pops off.

2. Reset the device by pressing and holding the button until the blue LED

begins ﬂashing.

Resetting the Device

Page 6

App Setup

Minimum requirements:

• Smartphone or tablet running iOS 9.0 or later / Android 5.0 or later.

• 2.4 GHz WiFi Network (not compatible with 5 GHz connections).

• Upload speed of at least 2 Mbps.

1. Download the App by scanning the QR code or by searching

"Wasserstein App" in Google Play Store or the App Store.

2. Sign up for a new account or log in to an existing account.

3. Click "Add Device" or "+" in the top right corner. Then, select "Add Manually"

or "Auto Scan".

1. 2.

3. 4.

Page 7

To use Auto Scan, please enable Bluetooth on your mobile device.

Premium Water Sensor

Premium Water Sensor

Premium Water

Sensor

Page 8

You can control the settings of your Smart Water Sensor, including the alarm and

low battery mode, as well as view your device record.

2 x AA batteries / Micro USB

5 V

2.4 GHz

147.6 ft

2.8 x 2.8 x 1.3 in (with holder)

Power:

Operating voltage:

Wireless type:

Wireless range:

Size:

Specif ications

Scan the QR code below or email us at [email protected].

Get More Support

Made in China

www.wasserstein-home.com

Wasserstein is a trademark of Dropcases Ltd.

1
2
3
4
5
6
7
8
9
10

WASSERSTEIN B09YRF8G1G User manual

Brand: WASSERSTEIN

Model: B09YRF8G1G

Type: User manual

WASSERSTEIN B09YRF8G1G is a smart water sensor that can detect water leaks and alert you through its alarm indicator and the Wasserstein app. It has a wireless range of 147.6 ft and can be powered by either 2 AA batteries or a micro USB cable. The sensor is easy to set up and use, and it comes with a holder, screws, wall anchors, and a probe cable. You can customize the settings of the sensor, such as the alarm and low battery mode, through the Wasserstein app.

Download PDF

Related papers

Other documents