2. hyfire
  3. Wireless Fire Protection
Wireless Fire Protection

hyfire Wireless Fire Protection User guide

  • Hello! I've reviewed the Hyfire product detail, which details wireless fire protection systems designed for heritage sites. The document emphasizes the ease of installation, minimal disruption, and long-term protection offered by the system. I'm ready to answer any questions you have about the capabilities and features of this wireless technology.
  • What makes the installation of fire protection systems difficult in heritage sites?
    What are the key advantages of using wireless fire detection systems in heritage buildings?
    How long does it take to install a wireless fire system?
In Partnership with
hyfire@technoswitch.co.za
+27 (0)11 794 9144
Listed buildings and historic interiors
require careful handling and minimal
intervention
Thick walls, convoluted floorplans and
wide fire hazards can complicate fire
system design and installation
Unknown quality and condition of
construction could lead to
unexpected costs and delays
Challenges for the
installation of a fire system
Heritage Sites and Listed
Buildings Fire Protection
Buildings with ‘listed’ status and prestigious
decor, with historic interiors that require
careful handling and minimal intervention,
often make the installation of fire protection
systems dicult. Cable placement is almost
impossible and building plans may not be as
detailed or meticulous as those for more
modern buildings. Thick walls, multiple levels,
complex layouts, hidden voids can further
complicate fire system installation, while the
quality and condition of construction can be
another unknown. Wireless fire detection and
alarm systems oer key advantages for
heritage buildings: easy and rapid installation,
minimum disruption, reduced project cost,
while providing long-term protection together
with the ability to upgrade or expand the
system in the future.
WIRELESS
FIRE PROTECTION
for Heritage Sites
and Listed Buildings
THE HYFIRE WIRELESS SOLUTION ENSURES OPTIMUM PERFORMANCE
The Hyfire wireless
technology protects building
fabric and guests, ensuring a
cost-ecient installation.
Hyfire oers the widest range of commercial standard wireless fire
devices on the market, ranging from optical, multi-criteria and heat
detectors to notification, alarm, interface and control units, all fully
certified to EN54. All products oer the highest performance and quality
in the industry, and are also fully compliant with BS5839 Part 1.
Easy and unobtrusive installation. The wireless system can be pre programmed,
configured and tested before being shipped to site, reducing time for the installation
and final commissioning. The occupants of the building rarely need moving, especially
important in museums, hotels and other common uses for heritage sites. Each wireless
fire device can be installed in minutes, with just two screws on the wall or on the ceiling.
Minimum disruption, cost ecient solution. By removing the need to run wire, manage
containment and fire stopping, find and fix earth and cable faults, wireless allows to
complete the installation in a very short time - a few days and not weeks or months as
for wired solutions - and to avoid surprises or delays that can change installation and
even system design and performance.
Long term protection with future proofed products. Wireless technology provides
long-term protection together with the ability to upgrade or expand the system to suit
any change on site, such as space redefinition in museums or room refresh in hotels.
Wireless systems can grow from very small to very large, easily and reliably.
HYFIRE, YOUR TRUSTED PARTNER
In Partnership with
/