Angelo Decor AD98025 Operating instructions

Hello! I'm a chat assistant and I've read the user manual for the Village Oasis Fountain AD98025. The manual provides detailed steps on setting up the fountain, including how to connect the light cables and create a drip loop to prevent water loss. I'm ready to answer your questions about the fountain and its features.
What should I do if I have issues with the product?

How do I prevent water loss from the fountain?

How do I adjust the water flow?

Fill with clean water and plug into a grounded GFCI outlet.

The pump must be fully submersed at all times to avoid pump burnout.

This product must be dried and stored during freezing temperatures. Printed in China

We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT

return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty

information.

AD98025

Village Oasis Fountain

Carefully unpack and

arrange all parts. If not already attached,

locate the installed light

cables and securely

attach them to the 2 to 1

light connection.

The light connection

should sit outside the

fountain.

IMPORTANT:

to prevent

the risk of water loss,

create a drip-loop with

the light cords by dipping

them into the reservoir

before they exit out the

back of the fountain.

Attach the cord from the

light connection to the

transformer.

Place the pump inside

the fountain.

Locate the tubing from

inside the fountain and

attach it to the pump.

Water flow can be

adjusted using the flow

control dial on the pump.

If splash is a concern,

the included black foam

can be cut and

positioned along

spillways to help calm

the water flow.