EC - Declaration of Conformity
We, Innovi Technologies Ltd of
31/F China Online Centre,
333 Lockhart Road,
Wan Chai, Hong Kong
declare under our sole responsibility that our product
BLUETREK ST1
to which this declaration refers is in conformity with the appropriate standards
EN300 328-02
EN301 489-17
EN301 489-01
EN50371
EN60950
Following the provisions of Radio and Telecommunications Terminal Equipment directive
1999/5/EC.
September 2006
Guillaume Ponticelli, Director of Development
1
FCC / Industry Canada Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference. (2) This device must accept any
interference received, including interference that may cause undesired operation.
In compliance with Industry Canada regulations, technical specications have been provided
in a declaration of conformity. This does not imply that Industry Canada approved the equipment.
Caution: Changes or modications to this Bluetooth® headset not expressly approved by the
party responsible for compliance could void the user’s authority to operate it.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer
under license.
2
Before using your headset for the rst time:
Charge it continuo usly for ap prox. 3hrs. I f your hea dset is ful ly charged, the green i ndicator
light w ill turn o .
(For det ails, pleas e refer to t he Charging section i n the manua l or the FAQ on the BLUETRE K
website : www.bluet rek.com/sup port/faq) .
Pair the headset w ith your mo bile phone (please refe r to the “Pairin g the BLUETR EK® ST1”
sectio n of this manual).
The BLUE TREK® ST1 is a wireles s stereo he adset based on the Bl uetooth® te chnology.
It com plies with the Blueto oth® 1.2 pro tocol, whic h supports the Heads et, Hands-f ree,
A2DP a nd AVRCP prol e.
The BLUE TREK® ST1 headset has 6 buttons, as shown i n Figure 1:
“TALK/ON /OFF “button (m ain right b utton),
1
2
3
4
5
6
7
1 “VOL +“ button,
1 “VOL -“ button,
“PLAY/PAUSE“ button
(mai n left butt on),
1 “FORWARD“ b utton,
1 “BACKWARD“ button.
USB Ch arging socke t
1
2
3
4
5
6
7
........
........
........
........
........
........
........
........
........
Figure 1 .
English
3
Charging the BLUETREK® ST1
Connec t the charg er to the h eadset as s hown in Figu re 2.
Figure 2.
Connec t the charg er to the h eadset and to the main s power sup ply (or USB port if using
USB ch arger). Dur ing the cha rge, the in dicator lig ht of the “PLAY/PAUSE“ bu tton will
turn g reen. This lig ht will tur n o when charging is complete. S ubsequent c harges shou ld
take a pproximately 1 hour 30 minutes.
When yo u hear a lo w-tone beep through you r headset at regular i ntervals, and the
“TALK/ON /OFF “button 1 ashes in red, your he adset needs to be rech arged.
Impor tant:
• To maximi ze battery lifetime, i t is recomm ended that you recharge your heads et to full
cap acity only when the b attery is low, as it ha s a lifetim e of about 500 chargin g cycles.
• If you leave yo ur headset battery em pty for an extended p eriod of t ime, it coul d
excessiv ely dischar ge the batt ery. In thi s case, cha rge your hea dset for 10 hours or m ore
until t he batter y recovers a nd recharge s completel y. Switch the headset on only when
the gre en indicato r light goe s o, indicat ing that t he battery has fully recovered.
• Do n ot let the battery ch arger remai n plugged i n the head set for more than 24h.
• The use of any oth er charger will automa tically sus pend the wa rranty.
1
4
English
4
Pairing the BLUETREK® ST1
Before using the h eadset, you must pair it with you r Bluetooth ® mobile p hone. Pairing is the
process of linkin g two Bluet ooth® devi ces, so that they can c ommunicate.
Figure 3 .
1. Plac e the heads et and your mobile ph one within 0.3 meters (1 foot) of each other.
2. Swit ch on your phone and s elect its Bluetooth® discover mo de (refer to the Blueto oth®
mo bile phone manual).
3. Ens ure the hea dset is swi tched o.
4. Press and hold the “TALK/ON/OFF” but ton fo r about 7 seconds unt il the indi cator light
a shes red an d blue alte rnately, and a tone can be heard th rough the s peaker.
5. Once the mobil e phone det ects the h eadset, a “BLUET REK ST1” messag e will be d isplayed.
Foll ow the phon e instruct ions to acc ept the pai ring. The PIN code (or p asskey) is 0000,
th en press “yes” or “ok”.
If the pairing i s successfu l, then the “TALK /ON/OFF” button indi cator light will turn into blue
and a shes interm ittently.
7
1.
Switch on your mobile
Go into
“Settings/connectivity”
2.
Search to nd
“ BLUETREK ST1”
3.
When found, enter
the passkey “0000”
4.
Select connect
1
1
English
5
If you haven’t star ted the dis covery mod e within 5 minutes, you must then switch o
your he adset and start the pairing ag ain.
Note: The pairing p rocedure mayb e dierent f or dierent phones, ple ase refer to your
mobile phone manu al for deta ils.
Using the BLUETREK® ST1 with your PC
You can co nnect your BLUETREK® ST 1 with your PC for lis tening to m usic or usi ng VoIP
communi cation usi ng a Blueto oth USB ste reo adapter or if your PC is integ rated with
Bluetoo th®. For fur ther deta ils on how to connect the headse t with the PC, please visit:
www.blu etrek.co m/suppo rt/faq .
Using the BLUETREK® ST1 with your audio device by connecting
with a Bluetooth® stereo adapter
You can li sten to your music from an audio d evice, such as MP3 pla yer, by connec ting to a
Bluetoo th® stereo adapter tha t supports the A2DP prole (ple ase refer to the Blueto oth®
stereo adapter use r manual to nd out wh ich prole it suppor ts). If you r Bluetooth ® stereo
adapter also supp orts AVRCP p role, pleas e refer to “List ening to Mu sic from th e
BLUETRE K® ST1” in this manual for the extra functions.
For fur ther detai ls on how to connect t he headset with the B luetooth® s tereo adapte r,
please visit: ww w.bluetre k.com/s upport /faq.
Note: The Bluetooth® stereo ada pter has to be purchase d separatel y if not in cluded.
English
6
Wearing the BLUETREK® ST1
1) Posit ion the he adset as sh own in Figure 4.1
Figure 4.1
2) Twist ge ntly the a rms of the BLUETREK® S T1
towa rds yourself.
Fi gure 4.2
3) Plac e the heads et as per Figure 4.3,
so that the neck band goes b ehind the
neck.
Fig ure 4.3
English
7
Switching the BLUETREK ST1® headset ON and OFF
To switch o n:
When yo ur headset is o, press and hold t he “TALK/ON/OFF” butt on for about 3
seconds until the blue indic ator light is on. A be ep (2 tones ) can be he ard through the
speake r then relea se the but ton.
To switch o :
When yo ur headset is on, pres s and hold the “TALK/ON/OFF ” button for a bout 7 seco nds
until t he red indi cator light is on aft er the quic k blue ash es. A beep (2 tones) c an be heard
in the speaker. Rele ase the “TALK/ON /OFF” button .
Making a call
Note: The voice diali ng feature i s not avail able on al l mobile ph ones or PDAs . However, you
can al ways dial di rectly usi ng your phon e keypad. I f your mob ile phone d oes oer th e voice
recognit ion feature, you can ma ke a call d irectly fro m the head set without touching y our
Bluetoo th® mobile phone.
Mobile phones wi th voice dia ling
Make s ure that th e voice dial ing functi ons on your phone are activated a nd that you r voice
tags h ave been reco rded. To program t hese, pleas e refer to yo ur phone m anual.
Press th e “TALK/O N/OFF” button (when there is no incoming a nd no act ive call). A n
audio connection is establi shed.
1
1
1
1
English
8
Wait for the audio signal that is sent by the phone (generally a short to ne).
Say the name of t he person w hom you wis h to call, as recorded in the phon e’s voic e tags.
The pho ne will di al the store d number.
Mobile phones wi thout voice dialing
Make s ure that bo th the head set and the phone are on and in stand-by mo de. Dial the phone
number you wish to call. Afte r approximat ely 2 secon ds the audi o connecti on is estab lished.
Answering a call
When th e headset rings, press once on th e “TALK/ON/OFF” butto n to take the c all.
Ending a call
Press th e “TALK/O N/OFF” button o nce t o end an ac tive call.
Making/Answering a call during music
If the re is an in coming call or if you are making a call whe n the music is playing , the music
will b e stopped u ntil the ca ll is ended .
7
1
1
English
9
Adjusting the volume
Increas ing the vol ume
To increase the volume during an active ca ll or when listening t o music, pre ss the “VOL+”
button on t he headset.
Decreas ing the vol ume
To decrease the volume during an active ca ll or when listening t o music, pre ss the “VOL-“
button on t he headset.
Muting the microphone
To activate the mute function
During an active call, press and hold t he “VOL+” button until you hear a two-tune b eep,
you can hear the o ther part y but they cannot hea r you. A pe riodic tone is heard t hrough
the sp eaker while the microp hone is mut ed.
To end the mute func tion
When th e microphon e is muted, press the "VOL+" button o nce. The perio dic tone wi ll
be end ed.
2
3
2
2
English
10
Transferring a call from BLUETREK® ST1 to the mobile phone
During an active call, press the “TALK/ON/OFF ” butto n for about 2 se conds.
(Thi s function only works in the Han ds-free pro le.)
In the Headset pr ole, you ca n simply t urn o your headset.
Transferring a call from BLUETREK® ST1 to the headset
To transfer the call b ack to the headset, p ress the “TALK/ON /OFF” button for 2 se conds.
(Th is functio n only work s in the Ha nds-free pr ole)
Call waiting
To accept th e second c all and rej ect the a ctive call
When yo u hear a ca ll waiting alert whi le you are o n a call, p ress once t he “TALK/ON/OFF”
button once to accept t he second c all and rej ect the ac tive call.
To accept th e second c all and pl ace the ac tive call o n hold
When yo u hear a ca ll waiting alert whi le you are o n a call, p ress the “TALK/ON /OFF” button 1
for app rox. 2 secon ds to accept the second call and the current call will be on hold.
7
1
1
1
1
English
11
To switch b etween the two calls
To switch between an active cal l and a hol d call, pres s approx. 2 seconds on the
“TALK/ON /OFF” button .
To end a c all and ta ke back the hold call
To end the active ca ll and take the hold c all, press once on the “TALK/ON /OFF” button .
Note: Thi s function may not be available on some pho nes. However, yo u can alway s
answer the second call from your phone keypad.
Additional features on some phones
Reject ing a call
When th e headset rings, press the “TALK/ON/OF F” butto n for about 2 se conds.
(Thi s function only works in the Han ds-free pro le)
Last n umber redia ling from the headse t
When th ere is no i ncoming or active cal l, press onc e on the “TALK/ON /OFF” button for
about 2 seconds u ntil you hea r a beep to ne. The last number will be automat ically redi aled.
1
1
1
1
English
12
Listening to Music from the BLUETREK® ST1
You can listen to your music from the Bluetooth® device through the BLUETREK® ST1 after
pairing them together. However, your Bluetooth® device must support A2DP prole in order
to listen to the music and AVRCP prole to use the remote functions as described below.
Figure 5
Play and pause*
Press the “PLAY/PAUSE” button on the headset to switch between play and pause functions.
Go to the next track*
While the music is playing, press the “FORWARD” button on the headset. You’ll hear a beep
and the next track in your play list will be played.
Go to the previous track*
While the music is playing, press the “BACKWARD” button on the headset. You’ll hear a
beep and the previous track in your play list will be played.
*These functions may not work on some devices, even if they support the AVRCP prole.
7
4
5
6
Previous Track
Next Track
VOL +
VOL -
Play/Pause
TALK/ON/OFF
........
........
........
........
........
........
........
.....
........
........
........
English
13
Listening to Music from the BLUETREK® ST1
You can li sten to your music from the Blueto oth® device through th e BLUETREK® ST1 after
pairin g them toge ther. However, you r Bluetooth ® device mu st suppor t A2DP pro le in order
to list en to the m usic and AVRC P prole to use the rem ote functi ons as des cribed belo w.
Figure 5
Play an d pause*
Press th e “PLAY/PAUSE” button on t he headset to switch between pla y and pause functions.
Go to the next t rack*
While t he music i s playing, p ress the “FORWARD ” button on the headset . You’ll h ear a beep
and th e next trac k in your p lay list wi ll be playe d.
Go to the previou s track*
While t he music i s playing, p ress the “BACKWARD ” butto n on the headse t. You’ll h ear a
beep a nd the previ ous track in your play list will be played.
*These functions may not wor k on some d evices, even if they s upport the AVRCP prole.
7
4
5
6
Previous Track
Next Track
VOL +
VOL -
Play/Pause
TALK/ON/OFF
........
........
........
........
........
........
........
.....
........
........
........
English
13
Bluetooth connection loss/ recover y
The hea dset maybe disconnect ed if the l ink between the phone and your h eadset is l ost,
for exa mple, if th e phone and the headse t are more than 10 met ers (33 fee t) apart.
If the headset is disconnec ted, the he adset will automatical ly try rec onnecting within
approxim ately 5 min utes, and yo u will hea r a periodi c beep. The mu sic will au tomatically
start again if t he connect ion is re- establishe d within 5 minutes.
If the connectio n is not re -establis hed after 5 minutes, you have to p ress once o n the
“TALK/ON /OFF” button to recon nect the h eadset with the phone manually.
Note:
This fu nction may not be ava ilable on s ome phones.
Some p hones will close the music player if the li nk is disco nnected. In this case, you
need to restart t he music p layer.
Troubleshooting guide
The rs t thing you should do if you enco unter a prob lem that yo u cannot s olve with th is
manual, is to swit ch o your headset and your mobil e phone, an d then swit ch them on
again.
To nd out more, pleas e refer to t he Troubleshoot ing/Frequent Asked Quest ions sect ions
of ou r website: w ww.bluet rek.com/ suppor t/faq.
1
English
14
Guide lines for s afe us e
Read t hese guidel ines before using your headset.
- Do n ot expose yo ur headset to liquid or moisture.
- Do n ot expose yo ur headset to extreme temperature s. Temper ature range: 0-40C.
- Do n ot expose yo ur headset to re or o pen ames.
- Do n ot try to disassemble your heads et. Servi ce and main tenance can only be pe rformed
by au thorized BLU ETREK® dea lers.
- Keep your headse t away from dust and d irt.
- Do n ot let chil dren play w ith your he adset, as i t contains small part s that coul d become
det ached and c reate a chok ing hazard .
- Chec k the regula tions in yo ur area if you plan to use your h eadset whil e driving.
- Turn o y our headset before boa rding an air plane.
CAUTION : There is a danger of e xplosion if the batter y is inco rrectly rep laced. Dispo se of
batteri es accordin g to local regulations. Do not dis pose of th em as house hold waste.
English
15
Glossary
- Heads et prole, describes how a Blue tooth enabl ed headset should comm unicate wit h
a co mputer or o ther Blueto oth enable d device su ch as a mob ile phone. Wh en
conn ected and congured, t he headset can act a s the remote device’s audio input and
out put interf ace.
- Hand s-free pro le, descri bes how a g ateway devic e can be us ed to place and receive
cal ls for a ha nd-free dev ice. A typi cal congur ation is an automobile using a m obile
pho ne for a gat eway device. In the ca r, the stereo is used for the phone aud io and a
mic rophone is installed in the car for sending outgoing a udio of the conversatio n. It is
als o used for a personal computer to act as a speakerpho ne for a mo bile phone in a
hom e or oce e nvironment.
- A2DP prole (Adv anced Audio Distributi on Prole), is designed for transfe rring a
2-c hannel ste reo audio st ream such a s music fro m an MP3 p layer, to a hea dset or ca r
radi o.
- AVRCP pr ole (Audio /Video Remo te Control Pro le), is de signed to p rovide a st andard
inte rface to c ontrol equi pments to a llow a sing le remote co ntrol (anot her devices ) to
cont rol all A/V devices to which a us er has acce ss. It is used in con cert with the A2DP
pro le.
English
16
/
