Signature Hardware 329625 Installation guide

Signature Hardware
Brand
Signature Hardware
Model
329625
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Signature Hardware 329625 is a wall-mount kitchen faucet that offers a stylish and functional addition to your kitchen. Its sleek design and durable construction make it a great choice for any home. The faucet features a single handle design for easy water control, and its high-arc spout provides ample clearance for filling pots and pans. The Signature Hardware 329625 also includes a side spray hose for added convenience, making it easy to rinse dishes or clean the sink. With its superior quality and stylish design, the Signature Hardware 329625 is a great choice for any kitchen.

Signature Hardware 329625 is a wall-mount kitchen faucet that offers a stylish and functional addition to your kitchen. Its sleek design and durable construction make it a great choice for any home. The faucet features a single handle design for easy water control, and its high-arc spout provides ample clearance for filling pots and pans. The Signature Hardware 329625 also includes a side spray hose for added convenience, making it easy to rinse dishes or clean the sink. With its superior quality and stylish design, the Signature Hardware 329625 is a great choice for any kitchen.

1Wall Mount Kitchen Faucet
WALL-MOUNT FAUCET
Before installing, read entire Wall-Mount Faucet Installation Instructions. Observe all local building and safety codes.
For the following installation instructions for your new wall-mount faucet it is assumed that any old xtures have been
removed and the water supply lines are in place behind the nished wall.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1-866-855-2284. If you need assistance or have questions while installing your faucet, contact Customer
Service.
We recommend consulting a professional if you are unfamiliar with installing kitchen xtures. Signature Hardware
accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.
Turn off the water supply at the sink where the new faucet is being installed.
TOOLS AND MATERIALS:
INSTALLATION
1. Install the rough-in valve body behind the nished wall. Attach the valve body to wood blocking between two wall
studs with wood screws. Be sure that the rough-in valve is completely level, and connect to the main water supply.
2. When the wall around the rough-in valve is nished, install your faucet trim.
3. If your faucet spout is not assembled, assemble by connecting the threaded outlet to the faucet body. If your spout is
already assembled move on to the next step.
4. If your faucet features a decorative face plate, secure the face plate to the wall with silicone sealant before
installing your handle and spout trim pieces. Make sure that the face plate is properly aligned over the rough-in valve
and perfectly straight. If your faucet does not feature a face plate move on to the next step.
5. If the decorative spout escutcheon is not attached, place the escutcheon on the body of the spout and install the
spout over the spout shank. Screw the spout into place and press the escutcheon rmly against the nished wall.
6. Tighten any set screws in the spout with the Allen wrench.
7. Install the handle(s) and any necessary hardware and tighten the set screws with your Allen wrench. If rubber
O-rings or sealing gaskets are included, place between the handle body and wall to create a water tight seal.
8. Install the side spray hose and nozzle if included.
9. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight
(no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow
the water to ow through the spout for approximately 60 seconds. If you have a side spray, divert the water to the
spray and allow the water to ow through the hose for an additional 60 seconds.
Allen Wrench (provided) LevelDrill
Wood Screws Silicone Sealant
  • Page 1 1

Signature Hardware 329625 Installation guide

Signature Hardware
Brand
Signature Hardware
Model
329625
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Signature Hardware 329625 is a wall-mount kitchen faucet that offers a stylish and functional addition to your kitchen. Its sleek design and durable construction make it a great choice for any home. The faucet features a single handle design for easy water control, and its high-arc spout provides ample clearance for filling pots and pans. The Signature Hardware 329625 also includes a side spray hose for added convenience, making it easy to rinse dishes or clean the sink. With its superior quality and stylish design, the Signature Hardware 329625 is a great choice for any kitchen.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents