Biamp INTEGRITY is a powered mixing console that offers a wide range of features and capabilities for professional audio applications. With its three independent mixing channels, each equipped with a 3-band EQ, high-pass filter, and phantom power, the INTEGRITY provides versatile audio processing options. Additionally, the console features two aux sends and two returns, allowing for external effects processing and signal routing.
Biamp INTEGRITY is a powered mixing console that offers a wide range of features and capabilities for professional audio applications. With its three independent mixing channels, each equipped with a 3-band EQ, high-pass filter, and phantom power, the INTEGRITY provides versatile audio processing options. Additionally, the console features two aux sends and two returns, allowing for external effects processing and signal routing.
___________________________________________________________________________
Biamp Systems, 14270 N.W. Science Park, Portland, Oregon 97229 (503) 641-7287
INTEGRITY TriPower
3
Powered Mixing Console
Operation Manual
1
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
☎
INTEGRITY TriPower
3
___________________________________________________________________________
2
+15
15
---
high
mid
low
trim
aux 1
aux 2
pan
aux 3
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
solo
(11)
(12)
INPUT CHANNEL CONTROLS
___________________________________________________________________________
3
+15
15
---
high
mid
low
trim
aux 1
aux 2
pan
aux 3
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
solo
(11)
(12)
INPUT CHANNEL CONTROLS
___________________________________________________________________________
4
aux 1
aux 2
return 1
aux 3
aux 3
return 2
Post
Pre
+10
+9
+6
0
-3
-6
-10
-20
-60
9
6
3
0
3
6
9
12
15
power
+12 +12
+12
0
-12
+12
0
-12
+12
0
-12
+12
0
-12
50 100 200 400 800 1.6k 3.2k 6.3k 12.5k
50 100 200 400 800 1.6k 3.2k 6.3k 12.5k
equalizer B
equalizer A
headphones
mono
AUX 3 MONO
meter
aux 3/mono
L/R
solo
L/R
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(16)
(17)
(8) (9) (11) (12)
(10)
(13)
(14)
(15)
LEFT RIGHT
stereo
phantom
power
MASTER CONTROLS
___________________________________________________________________________
5
MASTER CONTROLS
___________________________________________________________________________
6
mic
line
patch
12
+
-
mono
bridge
AMPLIFIERS
input 3
input 2
EQ in A
EQ out A
EQ in B
EQ out B
mono
MIXER OUTPUTS
aux 1
aux 2
aux 3 return 1 return 2
L
R
L
R
stereo tape
input 1
output 1
+-
output 3
+-
output 2
+-
CONNECTORS
___________________________________________________________________________
7
CONNECTORS
___________________________________________________________________________
8
CAUTION: To prevent Electric Shock or Fire,
Do not expose this appliance to rain or moisture.
Do not remove End Panels. No User serviceable
Parts inside. Refer servicing to qualified service
personnel. For continued protection against risk
of Fire, replace only with same type Fuse.
110 VAC 10 A SB Fuse
220 VAC 5 A SB Fuse
50/60 Hz 1000 Watts max
1 & 2 Normal
1 & 2 Bridge
MADE IN U.S.A.
SERIAL #
220
110
USE ONLY WITH 250V FUSE
(1)
(4)
(3)
(2)
USE ONLY WITH 250V FUSE
standard
fuse
alternate
fuse
POWER
___________________________________________________________________________
9
W3
W4
POST
AUX 1, 2
PRE F
PRE F
AUX 3, 4
POST
PAN
AUX 3
AUX 2
J6
J5
POST
PRE F
J6
AUX 1
POST-FADER
AUX 2 & 3
PRE-FADER
POST
PRE F
J6
AUX 1
PRE-FADER
AUX 2 & 3
POST-FADER
RACKMAX II
INPUT PCB
W3
W4
0
W3
W4
0
MODIFICATIONS
___________________________________________________________________________
10
output 1
output 2
output 3
AMPLIFIERS
input 1 EQ in A mono
stereo
input 2 EQ out A aux 1
EQ in B aux 2
input 3 EQ out B aux 3 return 1 return 2
tape
L
R
L
R
+-
+-
+
-
mono
bridge
+-
MIXER OUTPUTS
Factory Default
This is the way the system operates from the factory. The connections
shown here are internal and do not
require external cabling. The other
applications show some of the ways that the system can be re-assigned.
A System Diagram for each application is shown on page 11.
The internal factory default assignments are as follows.
Mains:
Mono output from the mixer to EQ in A. EQ out A to amplifier
Input 1. Amplifiers 1 & 2 are set for mono-bridge. Outputs 1 & 2 deliver
300 watts @ 8 ohms for mains.
Monitors:
Aux 3 output from the mixer to EQ in B. EQ out B to amplifier
Input 3. Output 3 delivers 150 watts @ 4 ohms for monitors.
Stereo with Monitor
This application requires three 1/4" phone cables connected as shown.
Mains:
Left output from the mixer to EQ in A. EQ out A connects to
amplifier Input 1 internally. Right output from the mixer to EQ in B. EQ
out B connects to amplifier Input 3 internally. Amplifiers 1 & 2 are set
for stereo (not bridged). Outputs 1 & 3 deliver 150 watts per side @ 4
ohms for stereo mains.
Monitors:
Aux 3 output from the mixer to amplifier Input 2. Output 2
delivers 150 watts @ 4 ohms for monitors. An outboard equalizer may
be connected between Aux 3 output and amplifier Input 2 for monitor
equalization.
output 1
output 2
output 3
AMPLIFIERS
input 1 EQ in A mono
stereo
input 2 EQ out A aux 1
EQ in B aux 2
input 3 EQ out B aux 3 return 1 return 2
tape
L
R
L
R
+-
+-
+
-
mono
bridge
+-
MIXER OUTPUTS
output 1
output 2
output 3
AMPLIFIERS
input 1 EQ in A mono
stereo
input 2 EQ out A aux 1
EQ in B aux 2
input 3 EQ out B aux 3 return 1 return 2
tape
L
R
L
R
+-
+-
+
-
mono
bridge
+-
MIXER OUTPUTS
*
Bi-amplified Mains
This application requires three 1/4" phone cables and a cross-over
*
.
Mains:
Mono output from the mixer connects to EQ in A internally. EQ
out A to cross-over
*
input. Low-frequency output from the cross-over
*
to
amplifier Input 1. Amplifiers 1 & 2 are set for mono-bridge. Outputs 1 &
2 deliver 300 watts @ 8 ohms for low-frequencies. High-frequency
output from the cross-over
*
to amplifier Input 3. Output 3 delivers 150
watts @ 4 ohms for high-frequencies.
Monitors:
Aux 3 output from the mixer connects to EQ in B internally.
EQ out B may be connected to an outboard amplifier for monitors.
Mains/Monitors/Zone
This application requires one 1/4" phone cable connected as shown.
Mains:
Mono output from the mixer connects to EQ in A internally. EQ
out A connects to amplifier Input 1 internally. Amplifiers 1 & 2 are set
for stereo (not bridged). Output 1 delivers 150 watts @ 4 ohms for
mains.
Monitors:
Aux 3 output from the mixer connects to EQ in B internally.
EQ out B connects to amplifier Input 3 internally. Output 3 delivers 150
watts @ 4 ohms for monitors.
Zone:
Aux 2 output from mixer to amplifier Input 2. Output 2 delivers
150 watts @ 4 ohms for the zone output. An outboard equalizer may be
connected between Aux 2 output and amplifier Input 2 for zone
equalization.
output 1
output 2
output 3
AMPLIFIERS
input 1 EQ in A mono
stereo
input 2 EQ out A aux 1
EQ in B aux 2
input 3 EQ out B aux 3 return 1 return 2
tape
L
R
L
R
+-
+-
+
-
mono
bridge
+-
MIXER OUTPUTS
output 1
output 2
output 3
AMPLIFIERS
input 1 EQ in A mono
stereo
input 2 EQ out A aux 1
EQ in B aux 2
input 3 EQ out B aux 3 return 1 return 2
tape
L
R
L
R
+-
+-
+
-
mono
bridge
+-
MIXER OUTPUTS
Center Cluster with Side Fills
This application requires three 1/4" phone cables connected as shown.
Mains:
Left output from the mixer to EQ in A. EQ out A connects to
amplifier Input 1 internally. Amplifiers 1 & 2 are set for stereo (not
bridged). Output 1 delivers 150 watts @ 4 ohms for the left side fill.
Right mixer output to EQ in B. EQ out B connects to amplifier Input 3
internally. Output 3 delivers 150 watts @ 4 ohms for the right side fill.
Mono output from the mixer to amplifier Input 2. Output 2 delivers 150
watts @ 4 ohms for the center cluster. An outboard equalizer may be
connected between Mono output and amplifier Input 2 for center cluster
equalization.
Monitors:
Aux 2 and Aux 3 may be connected to outboard equalizers
and amplifiers for monitors.
APPLICATIONS
___________________________________________________________________________
11
MainsMonitors
INTEGRITY
TriPower
Monitors
Right Main
Left Main
monitor
equalizer
INTEGRITY
TriPower
Monitors
Main
Lows
INTEGRITY
TriPower
main
cross-over
Main
Highs
monitor
amplifier
Monitors
Mains
Zone
zone
equalizer
INTEGRITY
TriPower
Monitors
Center
Right
INTEGRITY
TriPower
center
equalizer
Left
monitor
equalizer
monitor
amplifier
APPLICATIONS
___________________________________________________________________________
12
mic
line
patch
12
+
-
mono
bridge
AMPLIFIERS
input 3
input 2
EQ in A
EQ out A
EQ in B
EQ out B
mono
MIXER OUTPUTS
aux 1
aux 2
aux 3 return 1 return 2
L
R
L
R
stereo tape
input 1
output 1
+-
output 3
+-
output 2
+-
Monitor
Speakers
11
Main
Speakers
Effects
Playback Deck
Record Deck
Electronic Keyboard
Microphone
Signal Processing
Auxiliary
Sound
System
INSTALLATION DIAGRAM
___________________________________________________________________________
13
T
S
R
T
S
T
S
B
C
A
1
2
2
1
3
T
S
R
S
T
R
S
T
S
T
S
T & R
S
T
CABLES
___________________________________________________________________________
14
SPECIFICATIONS
___________________________________________________________________________
15
Amp 1
Input
Amp 1
Output
Solo
L/R
Headphone
Level
Right
Fader
Headphone
Output
Right Main
Output
Right Tape
Output
Left Tape
Output
Left Main
Output
Led
Meters
Left
Fader
Pre
Post
Mono/aux3
L/R
Meter
Select
EQ B
Input
EQ B
EQ B
Output
Amp 2
Input
Amp 3
Input
Bridge
Left
Right
Aux 1
Aux 2
Aux 3
Solo
BUSSES
[ - ]
+
--
Amp 2
Output
+
--
Amp 3
Output
+
--
EQ
low
100 Hz
mid
2 KHz
high
10 KHz
patch
in/out
pan
aux 1
aux 2
aux 3
post
pre
fader
signal
detect
-15 dBu +15 dBu
(monitor)
+10
phantom
power
trim
+8 dB
to
+48 dB
phtm pwr
z-match
-15 dB
RF
trap
mic input
2K ohms
line input
10K ohms
solo
Phantom
Power
+48V
Right
Left
RTN 2
(Tape In)
aux 3
(monitor)
Rtn 2
Level
Rtn 1
Level
aux 3
(monitor)
Left
Right
RTN 1
Aux 2
Output
Aux 1
Output
Mono
Fader
Aux 2
Level
Aux 1
Level
Aux 3
Output
Aux 3
Fader
EQ A
Input
EQ A
Output
EQ A
Mono
Output
+48V
INTEGRITY TriPower Block Diagram
-14dB
-14dB
BLOCK DIAGRAM
___________________________________________________________________________
BIAMP IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED
WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL
SOUND EQUIPMENT DESCRIBED IN THIS OWNER'S MANUAL.
Thank you for purchasing BIAMP...
AMERICAN SOUND CRAFTSMANSHIP
Biamp Systems
14270 N.W. Science Park
Portland, Oregon 97229
(503) 641-7287
585.0034.00
WARRANTY
___________________________________________________________________________
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Biamp INTEGRITY is a powered mixing console that offers a wide range of features and capabilities for professional audio applications. With its three independent mixing channels, each equipped with a 3-band EQ, high-pass filter, and phantom power, the INTEGRITY provides versatile audio processing options. Additionally, the console features two aux sends and two returns, allowing for external effects processing and signal routing.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Biamp MixPak Plus + Operation User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Tascam M-3500 series Operation & Maintenance Manual
-
Mackie PPM1012 User manual
-
Samson Txm16 User manual
-
-
Peavey XR 2012 Owner's manual
-
Crest Audio GTX User manual
-
Mackie Compact Mixer User manual
-
Fender PX-2200 Series Owner's manual
-
SMA 12000TL User manual
-
Phonic POWERPOD K-12 Plus User manual