Foxwell 5559179142 User guide

Foxwell
Brand
Foxwell
Model
5559179142
Type
User guide

This manual is also suitable for

NT510 Update Guide-En V1.00
1
NT510 Update Guide
Delicately developed by the most distinguished experts in this industry, Foxwell NT510 is a low-cost handheld
scan tool that delivers OE-level diagnosis on all the electronic systems for a single car manufacturer. It does not
only include basic functions such as read/erase code, live date, but also it's capable of advanced functions such
as actuation, adaptation coding and programming- ideal for specialist, garages and car enthusiasts.
Available makes are: Acura, Alfa Romeo, Abarth, Audi, Australian Ford, BMW, Chrysler, Fiat, GM, Honda,
Hyundai, Holden, Jaguar, KIA, Lancia, Lexus, Land Rover, Maserati, MINI, Toyota, Opel, Rolla-Royce, Scion,
Seat, Skoda, Vauxhall, VW and more.
The scanner is shipped with one free software and can cover up to five vehicle makes. More software can be
added anytime at extra cost.
To update your scanner, please follow the three steps as below:
Step1: Obtain an FOXWELL ID.
Step2: Register the product with the product serial number and product password.
Step3: Update the product by the update application FoxScanner.
For step 1 and 2, please refer to Foxscanner update guide or click the link below.
Step 1: http://www.foxwelltech.com/support/item-216.html
Step 2: http://www.foxwelltech.com/support/item-217.html
1 Update the Scanner
To update scanner, you need the following tools:
● The scan tool
● PC application FoxScanner
● PC or laptop with USB ports and Internet explorer
● Internet service
● TF card reader
To be able to use update tool, PC or laptop must meet the following minimum requirements:
● Operation System: Win98/NT, Win ME, Win2000, Win XP, VISTA, Windows 7, Windows 8 and Windows 10.
● CPU: Intel PⅢ or better
● RAM: 64MB or better
● Hard Disk Space: 30MB or better
● Display: 800*600 pixel, 16 byte true color display or better
● Internet Explorer 4.0 or newer
NOTE
Before updating, please make sure your network works correctly.
Before updating, please make sure you have already created a Foxwell ID.
To update your scanner:
1. There are two ways to download the update PC application.
a. Visit our site www.foxwelltech.com and go the Product page. Find your product model and click it to view the product
profile. Select Download tab to download the PC application file.
NT510 Update Guide-En V1.00
2
Figure 1-01 Sample FoxScanner Download Screen
b. Log in at www.foxwelltech.com , go to your Member Center and select Registered Product. Click Software Details.
You will find the link right on the top of the softwares.
Figure 1-02 Sample FoxScanner Download Screen
2. Unzip the application file. Follow instructions on computer screen to install the application and driver.
Figure 1-03 Sample FoxScanner installation Screen
3. Double click the desktop icon to launch the application.
4. Remove the TF card from the scanner, put it into the card reader and plug the reader into the computer. The TF card is
on the left side of scanner.
NT510 Update Guide-En V1.00
3
Figure 1-04 NT510 TF card location
5. Log in with your Foxwell ID and password.
Figure 1-05 Sample Sign in FoxScanner Screen
6. Foxscanner will automatically recognize the serial number and display all available applications, please read it carefully
before update. Please note that you are allowed to select and install any one of the vehicle software from the
available update list free of charge and in future you are allowed to install updates of the selected brand only.
In case you want to install any other vehicle software, please contact us or sign in your member center to place
an order of buying extra software.
Figure 1-05 Sample Foxscanner Warning Screen
Figure 1-06 Sample FoxScanner Screen
NT510 Update Guide-En V1.00
4
NOTE
If you’ve formatted the TF card, please select your serial number first and all available updates will display.
Figure 1-07 Sample Serial number selection Screen
7. Click the check box(es) in front of the software you wish to update and then click the Update button to download.
Figure 1-08 Sample Update Check Screen
NOTE
Please select the software you want to update, as you can ONLY have access to the update of this brand in the future once it’s
been selected initially. To access other brand application, you have to pay to access, Please refer to Section 4 for buying extra
software.
8. When Update button is clicked, it begins to download. And you can check the Current Status. If the Current Status
shows Downloading, please do not close the update application. Please do not close Foxscanner until it shows Update
Done.
Figure 1-09 Sample Updating Screen
NT510 Update Guide-En V1.00
5
9. Please click Software Management to review all the updated software.
Figure 1-10 Sample Software Management Screen
NOTE
If “Update Failed” dialog comes up, it indicates that the software updates failed. Please check the network connection or
TF card. If the problem still exists, please contact s[email protected] or your local dealer for assistance.
10. To uninstall some software, please select them and click the Uninstall button.
Figure 1-11 Sample Software Uninstallation Screen
2 Buy Extra Software
NT510 is shipped with one free software and can cover up to five vehicle makes. More software can be
added anytime at extra cost. You can contact the reseller or following the steps below to buy extra software.
To buy extra software:
1. Log in at our website www.foxwelltech.com and go to your Member Center, click Registered Products.
Figure 2-01 Sample Member Center Screen
NT510 Update Guide-En V1.00
6
2. Find the NT510 serial number and click the Software Details, you will see all software already installed on this scanner
and all software available to buy.
Figure 2-02 Sample Software Details Screen
3. Select the software you need and click Add To Cart button.
4. Click the Shopping Cart at the top right of the website to go to the Shopping Cart Page.
Figure 2-03 Sample Shopping Cart Screen
5. You can manage your shopping cart by clicking Delete to delete the software that you don’t need or click Continue
Shopping to go back to Member Center page to add software. If you have finished shopping, please click Proceed to
Checkout and follow the on-screen guide to go to the payment page.
Figure 2-04 Sample Payment Screen
When the payment is made successfully, the software would be listed in the available updates list of Foxscanner and you
are able to update it.
NT510 Update Guide-En V1.00
7
Figure 2-05 Sample Foxscanner Available updates Screen
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Foxwell 5559179142 User guide

Foxwell
Brand
Foxwell
Model
5559179142
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents