Lehmannaudio Studio Cube Mounting Kit User manual

  • Hello! I am an AI chatbot trained to assist you with the Lehmannaudio Studio Cube Mounting Kit User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
StudioCube
Rev.02
Montage Set / Assembly kit Artikel Nr. / Item No. 30009EU
Stück/ Qty. Bezeichnung / Part name
1x U-Bügel / Yoke
2x Rändelschraube / Knurled thumb screw
4x Nylon Beilagscheibe / Nylon washer
Montage Anleitung / Assembly instruction
Hinweis / hint:
Verwenden Sie nur 2 Beilagscheiben zur Montage des U-Bügels am Gerät. Die beiden anderen sind als Unterlegscheiben zur
unter Tischmontage gedacht.
Use only 2 washers for mounting the yoke on the device. The other two are intended as spacer for under the table mounting.
< ------------------------------ 90mm --------------------------------------->
< --------------------------- 90mm -------------------->
Papierkante markiert die Vorderkante des Potentiometerknopfs
Edge of sheet marks the front edge of volume knob
Potentiometerknopf
volume knob
--->
--->
--->
--->
Bohrschablone für Untertisch-Montage
sub desk drill pattern for Studio Cube mounting
StudioCube
/