AUTOOL X60 Car OBD
Multi-Functional Meter User Manual
Trademark
AUTOOL Technology Co, Ltd. has registered its
trademarks in several countries including China,
the trademark is . With regard to the
other trademark, service logo, domain name,
icon and company name mentioned in this
manual, they shall all belong to AUTOOL and its
other affiliated company, in other countries
without the registration yet of these trademark,
service logo, domain name, icon and company
name of AUTOOL, here we announce they are
owned by AUTOOL. Any company or person
shall not use the trademark, service logo,
domain name, icon and company name of
AUTOOL before getting approved by AUTOOL
with written certificates. Please visit our website
www.autooltech.com or email to
aftersale@autooltech.com to contact us.
1. Caution
Please read this manual carefully as part of
using the product.
Please keep this manual in case of product
- 2 -
maintenance.
Please follow the operation instructions and use
the parts recommended by manufacturer.
The product is only used for functions as
designed, please don’t use it for other purpose.
In term of improper usage or purpose usage of
the product, the manufacturer shall not be
responsible for the results.
2. Product Introduction
2.1 Suitable vehicle models
The product is suitable for standard OBD II
protocol compliant petrol and diesel vehicles,
especially for vehicles without a temperature
gauge, tachometer and fuel consumption meter.
2.2 Product installation
This product is a car OBD multi-function
instrument with a stylish and compact shape. It
is designed for installation through the plug and
play OBD port without cutting the wire, easy
and simply to install.
2.3 Features of product hardware
32-bit ARM CORTEX-M3 CPU, with 72MHz
maximum operating frequency, in support of
multiple high speed automotive communication
protocols
2.4 Early Alarm Function
Support multiple early alarm functions: water
- 3 -
temperature early alarm, over-speed early alarm,
shifting reminding early alarm and vehicle fault
early alarm; bring car owners great convenience
for safe driving.
2.5 Clearing Error Codes
Car owners can scan and clear regular vehicle
error codes at their discretion and reduce repair
costs, without going to the 4S shop.
3. Product Description
X60 OBD computer is a smart and powerful
auto meter. It is especially designed for vehicle
without speedometer, engine temperature
gauge, oil thermometer, boost gauge and fuel
consumption meter.
X60 can also monitor and display battery
voltage, engine charging voltage, over-speed
alarm, engine temperature warning. It can even
read the real-time data stream, scan and clear
trouble code.
3.1 Autool X60 Product Appearance
- 4 -
1. Function button
2. OBD port
3. Ambient light detector
4. Display Screen
Turn right/left of function button to quick select
from main screen. In setting mode, turn
right/left to choose menu. Press down in the
middle to confirm. Long press menu button in
the middle to exit or go back.
4. Product Installation and Use
Connect one side of OBD cable with car OBD
port, the other side with X60 OBD port.
After connection with main unit, start the car
and wait X60 to connect with vehicle. Connected
successfully, the X60 ticks and displays vehicle
protocol. Then it will show parameter setting for
the first use.
- 5 -
International universal OBD plug protocol
stipulated by SAE:
OBD port to connect ECU and X50 Plus
Note:
The automobile dash-board must be kept clean,
if there is wax on it, the double adhesive panel
may not be pasted on it, please clean it with a
hot towel and then start installation. When you
install, heat the instrument panel by hot blowing
air, which can make the best achieve effect.
4.1 Holder Installation
- 6 -
1) Tear 3M double-sided tape, and fasten it
with holder base.
2) Pull up the bottom center to right and left.
3) Insert the base of holder to the bottom of
main unit.
4) Insert the nut from right, and nut from left.
5) Fasten the screw with screwdriver.
- 7 -
4.2 Product Operating Setting
Turn right/left of button in the top of main unit,
the displayed large character can be switched
fast.
If the device does not support current data
display, red X will be displayed. If function data
needed cannot be selected, please check in the
data stream of Electronic Control Diagnosis
System.
Current speed Intake temperature
Water temperature Average speed
Outside temperature Battery voltage
MAP (manifold absolute pressure) Fuel pressure
TAHCO/RPM (rotate per minute) Engine load
- 8 -
Fuel Level Clock
Average fuel average Distance
Instant Fuel consumption Ignition Turbine
OIL P. (engine oil pressure) Throttle position
OIL T. (engine oil temperature)
4.3 Electronic Control Diagnosis System
Press the function button to Electronic Control
Diagnosis System. It includes 3 functions. See
the picture below:
Choose the function“Scan DTCs”, it can read
trouble code, and you can decide if clearing the
code.
- 9 -
Choose “Data Stream”. It will monitor real-time
data. Turn right/left of the button, it will show
page up and down.
4.4 Vehicle Performance Test
Vehicle performance test includes:
speedup test, brake test, target speedup,
brake initial speed.
Before speedup test, please set target
speedup. When it reaches to the scheduled
speed, finish speedup test.
Before brake test, please set brake initial
speed. When it reaches to brake initial
speed, calculate the distance from
beginning to the end of acceleration.
4.5 Product Parameter Setting
In parameter setting, turn right/left of the
button to set the parameter value. Long press
function key back to previous menu.
- 10 -
4.6 Product Parameter Setting Including:
Engine displacement - To accurately
calculate instant and average fuel
consumption
Fuel type - Choose petrol or other type
fuel, fuel consumption data will be much
different.
Over-speed alarm - When it reaches to the
scheduled speed, it will tick to alarm, and
the character for speed will display in red.
Water temperature warning - When it
reaches to the scheduled engine
temperature, it will tick to alarm, and the
character for temperature will display in
red.
Shift reminding - When it reaches to the
scheduled speed, it will remind to shift,
and display shift symbol.
Shift reminding limit - When it reaches to
the scheduled speed, it will turn off shift
reminding, in case it exceeds the
- 11 -
scheduled speed, and cannot shift up.
Standby time - After the vehicle shuts
down, and it reaches to the scheduled
standby time, X60 will change to automatic
sleep.
Speed error adjustment - when the speed
is 100km, adjust displayed speed of X60 to
100km.
Battery voltage adjustment - Adjust X60
voltage to display accurately.
Voltage warning - To remind the driver if
the battery is under charge
Color of number - 7 colors to choose.
Speed to zero - In idle speed mode, speed
will display zero if it is lower than the
scheduled.
Fuel consumption adjustment - Average
fuel consumption is less the actual. If it
displays more, adjust the percentage to be
smaller, and vice versa.
Reset - X60 will revert to the initial state.
4.7 X60 Display Setting
To set display in X60
- 12 -
In working condition, 4 types of information will
display. They corresponds to the following
content:
1 - Quick switch to displayed quantity and
content.
2 - Set more content.
3 - Set to display instant fuel consumption or
RPM bar.
4 - The 10 round icons in the top are shift
reminding display. It is default off.
5. Product Information
It helps to check software version, vehicle
protocol and solution for protocol compatibility.
- 13 -
5.1 About protocol compatibility
When connecting with some vehicles, gauge
LED or trouble alarm LED may be lit. Please
follow the “Matching info” to operate - Please
open OBD cable of product, and cut off the
corresponding pins to solve the problem.
5.2 Product Parameter
Work voltage 10-18V
DC
Work
current
<80mA
Sleep mode
current
<15mA Work temp. -20~75℃
Size(mm) 60*50*67
5.3 Product packing list: main unit, OBD
cable, 3M double-sided tape, user manual,
quality certificate.
6. Warranty
There are 3 years’ warranty for AUTOOL
products and 1 year warranty for the accessories
since the day the customers have received the
- 14 -
product parcel.
Warranty Access
1. Repair or replace the equipment will be done
according to the specific fault conditions;
2. We guarantee that all replacement parts,
accessories or equipment are brand new;
3. When there is a product breakdown that can
not be solved within 90 days, customer should
provide video and pictures as proof, we will bear
the freight cost and provide customer the
accessories in need to replace. After receiving
the product for more than 90 days, the
customer shall bear the freight cost, we will
provide the accessory for free to replace.
Warranty not Covered in Conditions Listed
Below:
1. Product is bought through non-official
AUTOOL purchase channel.
2. Product failure is caused by incorrect use of
the product, use for other wrong purpose or
human factors.
Disclaimer: The AUTOOL Technology Co, Ltd.
- 15 -
reserves the right to change product designs
and specifications without prior notice. The
physical appearance and color may differ from
those shown in the instruction manual. Please
refer to the actual product. If you have any
questions, please contact the dealer or the
Autool service center. The company have
the final explanation right of product and shall
not bear any consequences due to
misunderstanding.
/
