Simplicity 020378-01 User manual

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC

MILWAUKEE, WISCONSIN, U.S.A.

Manual No. 317381GS Revision -

Pressure Washer/Laveuse haute pression/Hochdruckreiniger/

Lavadora de Pressão/Limpiadora a presión

Operator’s Manual/Manuel d’utilisation/Bedienerhandbuch/

Manual de Operação/Manual del Operario

This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association (PWMA)

standard PW101-2010 (Testing and Rating Performance of Pressure Washers).

BPW2500

Not for

Reproduction

2 BRIGGSandSTRATTON.COM2 BRIGGSandSTRATTON.COM

A

12

8

13

E

F

A

G

N

K

H

C

B

D

P

11

R

L

M

B

2

A

C

A

3

B

C

4

B

A

5

C

A

B

6

A

B

C

D

9

A

10

A

1

J

7

Not for

Reproduction

Page is loading ...

4 BRIGGSandSTRATTON.COM

Thank you for purchasing this quality-built Briggs & Stratton® pressure waher. We are pleased that you’ve placed your confidence in the Briggs & Stratton brand. When operated

and maintained according to the instructions in this manual, your Briggs & Stratton pressure waher will provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with pressure waher and how to avoid them. Because Briggs & Stratton does not

necessarily know all the applications this pressure washer could be used for, it is important that you read and understand these instructions thoroughly before attempting to start or

operate this equipment. Save these original instructions for future reference.

This pressure washer requires final assembly before use. Refer to the Assembly section of this manual for instructions on final assembly procedures. Follow the instructions

completely.

Where to Find Us

You never have to look far to find Briggs & Stratton support and service for your pressure waher. There are thousands of Briggs & Stratton authorized service dealers worldwide

who provide quality service. You can also find the nearest Authorized Service Dealer in our dealer locator map on the Internet at BRIGGSandSTRATTON.COM.

Table of Contents

Operator Safety ...........................................5

Equipment Description ..........................................................5

Important Safety Information .....................................................5

Assembly ...............................................7

Unpack Pressure Washer ........................................................7

Attach Handle and Accessory Tray.................................................7

Add Engine Oil ................................................................7

Add Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Lubricate O-Rings..............................................................8

Connect Hose and Water Supply to Pump ...........................................8

Features and Controls.......................................8

Operation ...............................................8

Pressure Washer Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

How to Start Your Pressure Washer ...............................................8

How to Stop Your Pressure Washer................................................9

How to Use Accessory Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

How to Use Adjustable Nozzle ....................................................9

Applying Detergent.............................................................9

Pressure Washer Rinsing.......................................................10

Cleaning Detergent Siphoning Tube ...............................................10

Automatic Cool Down System (Thermal Relief.......................................10

Maintenance ............................................10

Maintenance Schedule .........................................................10

Pressure Washer Maintenance...................................................10

Engine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

After Each Use ...............................................................12

Winter Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Long Term Storage............................................................13

Troubleshooting..........................................14

Specifications ...........................................14

Product Specifications .........................................................14

Common Service Parts.........................................................14

Warranties .............................................15

Pressure Washer Owner Warranty ................................................15

BRIGGS & STRATTON POWER PRODUCTS is a registered

trademark of Briggs & Stratton Corporation

Milwaukee, WI, USA

ORIGINAL INSTRUCTIONS

Pressure Washer

Model Number

Revision

Serial Number

Date Purchased

Engine

Model Number

Type Number

Code Number

Not for

Reproduction

5

Operator Safety

Equipment Description

Read this manual carefully and become familiar with your pressure

washer. Know its applications, its limitations and any hazards involved.

This pressure washer operates at 172.3 BARS (2,500 PSI) at a flow rate of 7.5 l

(2.0 gallons) per minute. This high quality residential system features 25.4 cm (10”) wheels,

axial cam pump with stainless steel pistons, automatic cool down system, detergent

siphoning system, adjustable spray nozzle, heavy duty 9.1 m (30’) hose, and more.

Every effort has been made to ensure that the information in this manual is both

accurate and current. However, the manufacturer reserves the right to change, alter or

otherwise improve the product and this documentation at any time without prior notice.

Important Safety Information

The manufacturer cannot possibly anticipate every possible circumstance that might

involve a hazard. The warnings in this manual, and the tags and decals affixed to the

unit are, therefore, not all-inclusive. If you use a procedure, work method or operating

technique that the manufacturer does not specifically recommend, you must satisfy

yourself that it is safe for you and others. You must also make sure that the procedure,

work method or operating technique that you choose does not render the product

unsafe.

Safety Symbols and Meanings

The safety alert symbol indicates a potential personal injury hazard. A signal word

(DANGER, WARNING, or CAUTION) is used with the alert symbol to designate a

degree or level of hazard seriousness. A safety symbol may be used to represent the

type of hazard. The signal word NOTICE is used to address practices not related to

personal injury.

DANGER indicates a hazard which, if not avoided, will result in death or serious

injury.

WARNING indicates a hazard which, if not avoided, could result in death or

serious injury.

CAUTION indicates a hazard which, if not avoided, could result in minor or

moderate injury.

NOTICE address practices not related to personal injury.

Warning Tag Figure

1

A warning tag is provided on your unit to inform you of potential safety hazards. If the

tag becomes damaged or illegible, replace it by contacting your local Briggs & Stratton

dealer to obtain a new one.

The icons on the warning tag are shown and described in detail in this section.

WARNING Running engine gives off carbon monoxide, an odorless,

colorless, poison gas.

Breathing carbon monoxide could result in death, serious injury, headache,

fatigue, dizziness, vomiting, confusion, seizures, nausea or fainting.

Some chemicals or detergents could be harmful if inhaled or ingested, resulting in

death, serious injury, nausea, fainting or poisoning.

• OperatethisproductONLYoutdoors.

• Keepexhaustgasfromenteringaconfinedareathroughwindows,doors,

ventilation intakes, or other openings.

• DONOToperatethisproductinsideanybuilding,carport,porch,mobile

equipment, marine applications, or enclosure, even if windows and doors are open.

• Usearespiratorormaskwheneverthereisachancethatvaporsmaybeinhaled

when using chemicals.

• Readallinstructionswithmasksoyouarecertainthemaskwillprovidethe

necessary protection against inhaling harmful vapors when using chemicals.

WARNING Starter cord kickback (rapid retraction) will pull hand and arm

toward engine faster than you can let go which could cause broken

bones, fractures, bruises, or sprains resulting in serious injury.

• NEVERpullstartercordwithoutfirstrelievingspraygunpressure.

• Whenstartingengine,pullcordslowlyuntilresistanceisfeltandthenpullrapidly

to avoid kickback.

• Aftereachstartingattempt,whereenginefailstorun,alwayspointspraygunin

safe direction, press red button and squeeze spray gun trigger to release high

pressure.

• Firmlygraspspraygunwithbothhandswhenusinghighpressurespraytoavoid

injury when spray gun kicks back.

WARNING Chemical Burn Hazard.

Chemicals could cause burns resulting in death, serious injury, and/or

property damage.

• DONOTusecausticliquidwithpressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followallmanufacturers

instructions.

WARNING Risk of electrocution.

Contact with power source could cause electric shock or burn resulting

in death or serious injury.

• NEVERspraynearpowersource.

Fire

Explosion

Toxic Fumes

Hot Surface

Moving Parts

Electrical Shock

Kickback

Flying Objects

Operator’s Manual

Projectile Chemical Burn

Fluid Injection

Fall Slippery Surface

WARNING Exhaust heat/gases could ignite combustibles, structures or

damage fuel tank causing a fire, resulting in death, serious

injury and/or property damage.

Contact with muffler area could cause burns resulting in

serious injury.

• DONOTtouchhotpartsandAVOIDhotexhaustgases.

• Allowequipmenttocoolbeforetouching.

• Keepatleast1.5m(5ft.)ofclearanceonallsidesofpressurewasherincluding

overhead.

• Contacttheoriginalequipmentmanufacturer,retailer,ordealertoobtainaspark

arrester designed for the exhaust system installed on this engine.

• Replacementpartsmustbethesameandinstalledinthesamepositionasthe

original parts.

WARNING Use of pressure washer could create puddles and slippery surfaces

causing you to fall resulting in death or serious injury.

Kickbackfromsprayguncouldcauseyoutofallresultingin

death or serious injury.

• Operatepressurewasherfromastablesurface.

• Thecleaningareashouldhaveadequateslopesanddrainagetoreducethe

possibility of a fall due to slippery surfaces.

• Beextremelycarefulifyoumustusethepressurewasherfromaladder,

scaffolding, or any other similar location.

• Firmlygraspspraygunwithbothhandswhenusinghighpressurespraytoavoid

injury when spray gun kicks back.

Not for

Reproduction

6 BRIGGSandSTRATTON.COM

NOTICE High pressure spray may damage fragile items including glass.

• DONOTpointspraygunatglasswheninjetspraymode.

• NEVERaimspraygunatplants.

NOTICE Improper treatment of pressure washer could damage it and shorten its life.

• Ifyouhavequestionsaboutintendeduse,askdealerorcontactqualifiedservice

center.

• NEVERoperateunitswithbrokenormissingparts,orwithoutprotectivehousingor

covers.

• DONOTby-passanysafetydeviceonthismachine.

• DONOTtamperwithgovernedspeed.

• DONOToperatepressurewasheraboveratedpressure.

• DONOTmodifypressurewasherinanyway.

• Beforestartingpressurewasherincoldweather,checkallpartsoftheequipmentto

be sure ice has not formed there.

• NEVERmovemachinebypullingonhoses.Usehandleprovidedonunit.

• ThisequipmentisdesignedtobeusedwithBriggs&StrattonPowerProducts

authorized parts ONLY. If equipment is used with parts that DO NOT comply with

minimum specifications, user assumes all risks and liabilities.

WARNING Unintentional sparking could cause fire or electric shock resulting

in death or serious injury.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

• Disconnectthesparkplugwirefromthesparkplugandplacethewirewhereit

cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

• Useapprovedsparkplugtester.

• DO NOT check for spark with spark plug removed.

WARNING Starter and other rotating parts could entangle hands, hair,

clothing, or accessories resulting in serious injury.

• NEVERoperatepressurewasherwithoutprotectivehousingorcovers.

• DONOTwearlooseclothing,jewelryoranythingthatcouldbecaughtinthe

starter or other rotating parts.

• Tieuplonghairandremovejewelry.

CAUTION Excessively high operating speeds could result in minor injury

and/or pressure washer damage.

Excessively low speeds impose a heavy load.

• DONOTtamperwithgovernorspring,linksorotherpartstoincreaseengine

speed. Pressure washer supplies correct rated pressure and flow when running at

governed speed.

• DONOTmodifypressurewasherinanyway.

WARNING Fuel and its vapors are extremely flammable and explosive which

could cause burns, fire or explosion resulting in death,

serious injury and/or property damage.

WHEN ADDING OR DRAINING FUEL

• TurnpressurewasherengineOFFandletitcoolatleast2minutesbefore

removing fuel cap. Loosen cap slowly to relieve pressure in tank.

• Fillordrainfueltankoutdoors.

• DONOToverfilltank.Allowspaceforfuelexpansion.

• Iffuelspills,waituntilitevaporatesbeforestartingengine.

• Keepfuelawayfromsparks,openflames,pilotlights,heat,andotherignition

sources.

• Checkfuellines,tank,capandfittingsfrequentlyforcracksorleaks.Replaceif

necessary.

• DONOTlightacigaretteorsmoke.

WHEN STARTING EQUIPMENT

• Ensuresparkplug,muffler,fuelcap,andaircleanerareinplace.

• DONOTcrankenginewithsparkplugremoved.

WHEN OPERATING EQUIPMENT

• DONOToperatethisproductinsideanybuilding,carport,porch,mobile

equipment, marine applications, or enclosure.

• DONOTtipengineorequipmentatanglewhichcausesfueltospill.

• DONOTsprayflammableliquids.

WHEN TRANSPORTING, MOVING OR REPAIRING EQUIPMENT

• Transport/move/repairwithfueltankEMPTYorwithfuelshutoffvalveOFF.

• DONOTtipengineorequipmentatanglewhichcausesfueltospill.

• Disconnectsparkplugwire.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

• Storeawayfromfurnaces,stoves,waterheaters,clothesdryers,orother

appliances that have pilot light or other ignition source because they could ignite

fuel vapors.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• Ifcutbyfluid,callphysicianimmediately.DONOTtreatasasimplecut.

• DONOTallowCHILDRENtooperatepressurewasher.

• NEVERrepairhighpressurehose.Replaceit.

• NEVERrepairleakingconnectionswithsealantofanykind.Replaceo-ringorseal.

• NEVERconnecthighpressurehosetonozzleextension.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• ALWAYSpointsprayguninsafedirection,pressredbuttonandsqueezespray

gun trigger to release high pressure, every time you stop engine.

• NEVERaimspraygunatpeople,animals,orplants.

• DONOTsecuresprayguninopenposition.

• DONOTleavespraygununattendedwhilemachineisrunning.

• NEVERuseaspraygunwhichdoesnothaveatriggerlockortriggerguardin

place and in working order.

• Alwaysbecertainspraygun,nozzlesandaccessoriesarecorrectlyattached.

WARNING Risk of eye or bodily injury.

Spray could splash back or propel objects resulting in serious

injury.

• Alwayswearindirectvented(chemicalsplash)safetygogglesmarkedtocomply

with ANSI Z87.1 when using or in vicinity of this equipment.

• NEVERsubstitutesafetyglassesordry-conditiongogglesforindirectvented

safety goggles.

• Alwayswearprotectiveclothingsuchasalong-sleevedshirt,longpantsand

close-toed shoes.

• NEVERoperatepressurewasherwhenbarefootorwearingsandalsorshorts.

Not for

Reproduction

7

Assembly

Read entire Operator’s Manual before you attempt to assemble or operate

your new pressure washer.

Your pressure washer requires some assembly and is ready for use after it has been

properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your pressure washer, contact your local

Briggs & Stratton service center. If you need assistance, please have the model, revision,

and serial number from the identification label available. See Features and Controls for

identification label location.

Unpack Pressure Washer

1. Set the carton on a rigid, flat surface.

2. Remove the parts bag, accessories, and inserts included with pressure washer.

3. Open carton completely by cutting each corner from top to bottom.

4. Ensure you have all included items prior to assembly.

Items in the carton include:

 • MainUnit

 • Handle

 • HighPressureHose

 • SprayGun

 • AdjustableNozzleExtension

 • PlasticAccessoryTray

 • PartsBag(whichincludesthefollowing):

  • Operator’sManual

  • HoseFittings

  • MaintenanceKit

  • Handle/AccessoryTrayFasteningHardwareKit(whichincludes):

   • CarriageBolts(2)

   • PlasticKnobs(2)

   • TreeClips(4)

To prepare your pressure washer for operation, you will need to perform these tasks:

1. Attach handle and accessory tray to main unit.

2. Add oil to engine crankcase.

3. Add fuel to fuel tank.

4. Connect high pressure hose to spray gun and pump.

5. Connect water supply to pump.

6. Attach nozzle extension to spray gun.

Attach Handle and Accessory Tray Figure

2

3

4

1. Place handle (2,A) onto handle supports (2,B) connected to main unit. Make

sure holes (2,C) in handle align with holes (2,C) on handle supports.

NOTICE It may be necessary to move the handle supports from side to side in order

to align the handle so it will slide over the handle supports.

2. Insert carriage bolts (3,A) through holes from back of unit and attach a plastic

knob (3,B) from front of unit. Tighten by hand.

3. Place accessory tray (4,A) over holes (4,B) on handle (viewing from front

of unit). Push the tree clips (4,C) into the holes until they sit flat against the

accessory tray.

4. Insert supplied accessories in spaces provided in accessory tray. See How to

Use Accessory Tray.

Add Engine Oil

1. Place pressure washer on a level surface.

2. Add engine oil as described in Adding Engine Oil of the Engine Maintenance

section.

NOTICE

Improper treatment of pressure washer could damage it and shorten its life.

• DONOTattempttocrankorstarttheenginebeforeithasbeenproperlyserviced

with the recommended oil. This could result in an engine failure.

Add Fuel Figure

5

Fuel must meet these requirements:

 • Clean,fresh,unleadedpetrol.

 • Aminimumof87octane/87AKI(91RON).Forhighaltitudeuse,seeHigh

Altitude.

 • Petrolwithupto10%ethanol(gasohol)orupto15%MTBE(methyltertiary

butyl ether) is acceptable.

NOTICE Avoid pressure washer damage.

Failure to follow Operator’s Manual for fuel recommendations voids warranty.

• DONOTuseunapprovedpetrolsuchasE85.

• DONOTmixoilinpetrol.

• DONOTmodifyenginetorunonalternatefuels.

To protect the fuel system from gum formation, mix in a fuel stabilizer when adding fuel.

See Storage. All fuel is not the same. If you experience starting or performance problems

after using fuel, switch to a different fuel provider or change brands. This engine is

certified to operate on petrol. The emission control system for this engine is EM (Engine

Modifications).

1. Clean area around fuel fill cap, remove cap.

2. Slowly add regular unleaded fuel (A) to fuel tank (B). Be careful not to overfill.

Allow about 4 cm (1.5”) (C) of tank space for fuel expansion.

3. Install fuel cap and let any spilled fuel evaporate before starting engine.

High Altitude

Ataltitudesover1500meters(5,000feet),aminimum85octane/85AKI(89

RON) petrol is acceptable. To remain emissions compliant, high altitude adjustment

is required. Operation without this adjustment will cause decreased performance,

increased fuel consumption, and increased emissions. See a Briggs & Stratton

Authorized Dealer for high altitude adjustment information. Operation of the engine at

altitudes below 750 meters (2,500 feet) with the high altitude kit is not recommended.

Lubricate O-Rings Figure

6

Lubrication of o-rings is extremely important for installation and operation. The use

of a lubricant (petroleum or synthetic grease) during assembly helps seat o-rings

properly and provides an improved seal. It also helps protect the o-ring from damage

by abrasion, pinching or cutting and extends the life of the o-ring.

NOTICE ALWAYS apply a small amount of lubricant on o-rings prior to assembling

the garden hose to the pump (A), high pressure hose threaded end (B), spray gun (C),

andhighpressurehosequickconnectend(D).

Lubricate all connections shown below, following these instructions:

1. Inspect and clean connecting surfaces prior to lubrication and assembly.

2. Use lubricants sparingly during assembly; a light film is all that is required.

3. Use a small brush or cotton swab to apply grease directly to o-rings where they

are not accessible (QC fitting, M22 fitting).

WARNING Fuel and its vapors are extremely flammable and explosive which

could cause burns, fire or explosion resulting in death, serious

injury and/or property damage.

WHEN ADDING FUEL

• TurnpressurewasherengineOFFandletitcoolatleast2minutesbefore

removing fuel cap. Loosen cap slowly to relieve pressure in tank.

• Fillfueltankoutdoors.

• DONOToverfilltank.Allowspaceforfuelexpansion.

• Iffuelspills,waituntilitevaporatesbeforestartingengine.

• Keepfuelawayfromsparks,openflames,pilotlights,heat,andotherignition

sources.

• Checkfuellines,tank,capandfittingsfrequentlyforcracksorleaks.Replaceif

necessary.

• DONOTlightacigaretteorsmoke.

Not for

Reproduction

Connect Hose and Water Supply to Pump Figure

7

8

9

10

NOTICE DO NOT run the pump without the water supply connected and turned on.

• Damagetoequipmentresultingfromfailuretofollowthisinstructionwillvoid

warranty.

NOTICE Remove and discard the shipping caps from the pump’s high pressure outlet

and water inlet before attaching hoses.

1. Uncoil high pressure hose and attach one end of hose to base of spray gun (7).

Pull back on collar of quick connect, slide fitting onto spray gun and let go of

collar. Pull on hose to be sure of a tight connection.

2. Attach other end of high pressure hose to high pressure outlet on pump (8).

Tighten by hand.

3. Run water through your garden hose for 30 seconds to clean out any debris.

NOTICE DO NOT siphon standing water for the water supply. Use ONLY cold water

(less than 38°C (100°F)).

4. Before connecting garden hose to water inlet, inspect inlet screen (9,A).

Clean screen if it contains debris or have it replaced if damaged. DO NOT run

pressure washer if inlet screen is damaged.

NOTICEUsingaOneWayValve(vacuumbreakerorcheckvalve)atpumpinlet

could cause pump or inlet connector damage.

• ThereMUSTbeatleasttenfeetofunrestrictedgardenhosebetweenthepressure

washer inlet and any device, such as a vacuum breaker or check valve.

• Damagetoequipmentresultingfromfailuretofollowthisinstructionwillvoid

warranty.

5. Connect the garden hose (not to exceed 15 m (50 ft.) in length) to the water

inlet (9). Tighten by hand.

6. Turn ON the water, press red button (10,A) on the gun and squeeze the trigger

to purge the pump system of air and impurities.

Checklist Before Starting Engine

Review the unit’s assembly to ensure you have performed all of the following.

1. Be sure to read Operator Safety and Operation sections before using pressure

washer.

2. Make sure handle is in place and secure.

3. Check that oil has been added to proper level in the engine crankcase.

4. Add proper fuel to fuel tank.

5. Check for properly tightened hose connections.

6. Check to make sure there are no kinks, cuts, or damage to high pressure hose.

7. Provide a proper water supply at an adequate flow.

Features and Controls Figure

11

Read this Operator’s Manual and safety rules before operating your

pressure washer. Compare the illustrations with your pressure washer, to

familiarize yourself with the locations of various controls and adjustments.

Save this manual for future reference.

A - Spray Gun — Controls the application of water onto cleaning surface with trigger

device. Includes trigger lock.

B - High Pressure Hose — Connect one end to water pump and the other end to spray

gun.

C - Recoil Starter — Used for starting the engine manually.

D - Fuel Tank — Fill tank with regular unleaded fuel. Always leave room for fuel

expansion.

E - Adjustable Nozzle — Always attached to nozzle extension. Adjustable nozzle allows

you to adjust spray pressure and spray pattern.

F - Throttle Lever — Sets engine in starting mode for recoil starter and stops a

running engine.

G - Air Filter — Protects engine by filtering dust and debris out of intake air.

H - Detergent Siphoning Tube — Use to siphon pressure washer safe detergent into

the low pressure stream.

J - Identification Label (near rear of base plate) — Provides model and serial number

of pressure washer. Please have these readily available if calling for assistance.

K - Water Inlet — Connection for garden hose.

L - Pump — Develops high pressure.

M - Automatic Cool Down System — Cycles water through pump when water reaches

51°C-68°C (125°-155°F). Warm water will discharge from pump onto ground. This

system prevents internal pump damage.

N - Engine Identification — Provides model, type and code of engine. Please have

these readily available if calling for assistance.

P - Oil Fill/Dipstick — Check, fill and drain oil here.

R - Accessory Tray — Provides convenient storage for standard and optional

accessories, such as brushes, turbo wands, etc.

Items Not Shown:

High Pressure Outlet — Connection for high pressure hose.

Operation

Pressure Washer Location Figure

12

Clearances and Air Movement

Place pressure washer outdoors in an area that will not accumulate deadly exhaust

gas. DO NOT place pressure washer where exhaust gas (A) could accumulate and enter

inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept

away from any windows, doors, ventilation intakes, or other openings that can allow

exhaust gas to collect in a confined area. Prevailing winds and air currents should be

taken into consideration when positioning pressure washer.

How to Start Your Pressure Washer Figure

13

14

15

To start your pressure washer for the first time, follow these instructions step-by-step.

This starting information also applies if you have let the pressure washer sit idle for at

least a day.

1. Place pressure washer near an outside water source capable of supplying water

at a flow rate greater than 11.35 l (3.0 gallons) per minute and no less than

1.38 BARS (20 PSI) at pressure washer end of garden hose. DO NOT siphon

supply water.

2. Check that high pressure hose is tightly connected to spray gun and pump. See

Assembly section.

3. Make sure unit is in a level position.

4. Connect garden hose to water inlet on pressure washer pump.

NOTICE DO NOT run the pump without the water supply connected and turned on.

• Damagetoequipmentresultingfromfailuretofollowthisinstructionwillvoid

warranty.

5. Turn ON water, point gun in a safe direction, press red button and squeeze

trigger to purge pump system of air and impurities.

6. Attach nozzle extension to spray gun (13). Tighten by hand.

8 BRIGGSandSTRATTON.COM

WARNING Exhaust heat/gases could ignite combustibles, structures or

damage fuel tank causing a fire, resulting in death, serious injury and/or

property damage.

• Keepatleast1.5m(5ft.)clearanceonallsidesofpressurewasherincluding

overhead.

WARNING Running engine gives off carbon monoxide, an odorless,

colorless, poison gas.

Breathing carbon monoxide could result in death, serious injury, headache,

fatigue, dizziness, vomiting, confusion, seizures, nausea or fainting.

• OperatethisproductONLYoutdoors.

• Keepexhaustgasfromenteringaconfinedareathroughwindows,doors,

ventilation intakes, or other openings.

• DONOToperatethisproductinsideanybuilding,carport,porch,mobile

equipment, marine applications, or enclosure, even if windows and doors are open.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERconnecthighpressurehosetonozzleextension.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• Alwaysbecertainspraygun,nozzlesandaccessoriesarecorrectlyattached.

WARNING Risk of eye injury.

Spray could splash back or propel objects resulting in serious injury.

• Alwayswearindirectvented(chemicalsplash)safetygogglesmarkedtocomply

with ANSI Z87.1 when using or in vicinity of this equipment.

• NEVERsubstitutesafetyglassesordry-conditiongogglesforindirectvented

safety goggles.

Not for

Reproduction

9

7. Move throttle lever (14,A) to the Fast position, shown as a rabbit (

).

NOTICE Before starting the pressure washer, be sure you are wearing adequate safety

goggles as described below.

NOTICE This unit is equipped with a ReadyStart® engine. A ReadyStart® engine

means there is no priming or choking required.

8. When starting engine, position yourself as recommended (15), grasp starter

grip handle and pull slowly until you feel some resistance. Then pull rapidly to

start engine.

9. Return starter grip handle slowly. DO NOT let rope “snap back” against starter.

NOTICE Always keep the throttle lever in the Fast (

) position when operating the

pressure washer.

How to Stop Your Pressure Washer

1. Release spray gun trigger and let engine idle for two minutes.

2. Move throttle to Slow (

) position, then Stop ( ) position.

3. ALWAYS point gun in a safe direction, press red button and squeeze spray gun

trigger to release retained high water pressure.

How to Use Accessory Tray Figure

16

The unit is equipped with an accessory tray with places to store your spray gun and

adjustable nozzle extension. There is also a hook at the front of the accessory tray to

hold your high pressure hose.

NOTICE The extra hole in the tray is for storing a utility brush. The extra clip in the

tray is for storing a turbo nozzle. The brush and turbo nozzle are NOT included with

your pressure washer. You can buy these items as optional accessories.

1. Place adjustable nozzle extension through hole on accessory tray.

2. Place spray gun through hole on accessory tray on right side of unit.

3. Hang high pressure hose on hook attached to accessory tray on front of tray.

How to Use the Adjustable Nozzle Figure

17

18

19

You should now know how to START and STOP your pressure washer. The information

in this section will tell you how to adjust the spray pattern and to apply pressure

washer specific detergents.

1. Slide nozzle backward (17,A) to achieve high pressure. Slide nozzle forward

(17,B) when you wish to adjust spray to low pressure mode.

2. Point nozzle down toward a firm surface and press trigger to test pattern (18).

3. Twisting nozzle adjusts spray pattern from a fan pattern (19,A) to a narrow

pattern (19,B).

Usage Tips

 • Formosteffectivecleaning,keepspraynozzlefrom20to61cm(8to24in.)

away from cleaning surface.

 • Ifyougetspraynozzletooclose,especiallyusinghighpressuremode,youmay

damage surface being cleaned.

 • DO NOT get closer than 15 cm (6 in) when cleaning tires.

Applying Detergent

To apply detergent, follow these steps:

1. Review use of adjustable nozzle.

2. Prepare detergent solution as required by job.

3. Place end of detergent siphoning tube into detergent container.

NOTICE Make sure the tube is fully submerged in detergent while applying detergent.

NOTICE Contact with the hot muffler could damage detergent siphoning tube.

• Wheninsertingthesiphonintoadetergentsolutionbottle,routethetubesoasto

keep it from inadvertently contacting the hot muffler.

4. Slide nozzle forward to low pressure mode. Detergent cannot be applied with

nozzle in high pressure position.

WARNING Exhaust heat/gases could ignite combustibles, structures or

damage fuel tank causing a fire, resulting in death, serious

injury and/or property damage.

Contact with muffler area could cause burns resulting in

serious injury.

• DONOTtouchhotpartsandAVOIDhotexhaustgases.

• Allowequipmenttocoolbeforetouching.

• Keepatleast1.5m(5ft.)ofclearanceonallsidesofpressurewasherincluding

overhead.

• Contacttheoriginalequipmentmanufacturer,retailer,ordealertoobtainaspark

arrester designed for the exhaust system installed on this engine.

• Replacementpartsmustbethesameandinstalledinthesamepositionasthe

original parts.

WARNING Risk of eye injury.

Spray could splash back or propel objects resulting in serious injury.

• Alwayswearindirectvented(chemicalsplash)safetygogglesmarkedtocomply

with ANSI Z87.1 when using or in vicinity of this equipment.

• NEVERsubstitutesafetyglassesordry-conditiongogglesforindirectvented

safety goggles.

WARNING Starter cord kickback (rapid retraction) will pull hand and arm

toward engine faster than you can let go which could cause broken

bones, fractures, bruises, or sprains resulting in serious injury.

• NEVERpullstartercordwithoutfirstrelievingspraygunpressure.

• Whenstartingengine,pullcordslowlyuntilresistanceisfeltandthenpullrapidly

to avoid kickback.

• Aftereachstartingattempt,whereenginefailstorun,alwayspointspraygunin

safe direction, press red button and squeeze spray gun trigger to release high

pressure.

• Firmlygraspspraygunwithbothhandswhenusinghighpressurespraytoavoid

injury when spray gun kicks back.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• ALWAYSpointsprayguninsafedirection,pressredbuttonandsqueezespray

gun trigger to release high pressure, every time you stop engine.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• DONOTallowCHILDRENtooperatepressurewasher.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• NEVERaimspraygunatpeople,animals,orplants.

• DONOTsecuresprayguninopenposition.

• DONOTleavespraygununattendedwhilemachineisrunning.

• NEVERuseaspraygunwhichdoesnothaveatriggerlockortriggerguardin

place and in working order.

• Alwaysbecertainspraygun,nozzlesandaccessoriesarecorrectlyattached.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERadjustspraypatternwhenspraying.

• NEVERputhandsinfrontofnozzletoadjustspraypattern.

WARNING Chemical Burn Hazard.

Chemicals could cause burns resulting in death, serious injury, and/or

property damage.

• DONOTusecausticliquidwithpressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followallmanufacturers

instructions.

Not for

Reproduction

10 BRIGGSandSTRATTON.COM

5. Make sure garden hose is connected to water inlet. Check that high pressure

hose is connected to spray gun and pump. Turn on water.

NOTICE You must attach all hoses before you start the engine.

• StartingtheenginewithoutallthehosesconnectedandwithoutthewaterturnedON

could damage the pump.

• Damagetoequipmentresultingfromfailuretofollowthisinstructionwillvoid

warranty.

6. Start engine following instructions How to Start Your Pressure Washer.

7. Apply detergent to a dry surface, starting at lower portion of area to be washed

and work upward, using long, even, overlapping strokes.

8. Allow detergent to “soak in” for 3-5 minutes before washing and rinsing.

Reapply as needed to prevent surface from drying. DO NOT allow detergent to

dry on (prevents streaking).

NOTICE You must flush the detergent siphoning system after each use by placing the

tube into a bucket of clean water, then run the pressure washer in low pressure for 1-2

minutes.

Pressure Washer Rinsing

For Rinsing:

1. Slide the nozzle backward to high pressure, press the trigger and wait for the

detergent to clear.

NOTICE You can also stop detergent from flowing by simply removing detergent

siphoning tube from bottle.

 2. Keepthespraygunasafedistancefromtheareayouplantospray.

3. Apply a high pressure spray to a small area, then check the surface for damage.

If no damage is found, it is okay to continue cleaning.

4. Start at the top of the area to be rinsed, working down with same overlapping

strokes as you used for washing and applying detergent.

Cleaning Detergent Siphoning Tube

If you used the detergent siphoning tube, you must flush it with clean water before

stopping the engine.

1. Place detergent siphoning tube in a bucket full of clean water.

2. Slide adjustable nozzle forward to low pressure position.

3. Flush for 1-2 minutes.

4. Shut off engine following instructions How to Stop Pressure Washer and turn

off water supply.

5. ALWAYS point gun in a safe direction, press red button and squeeze spray gun

trigger to release retained high water pressure.

Automatic Cool Down System (Thermal Relief)

If you run the engine on your pressure washer for 3-5 minutes without pressing the

trigger on the spray gun, circulating water in the pump can reach temperatures above

52°C (125°F). The system engages to cool the pump by discharging the warm water

onto the ground.

Maintenance

Maintenance Schedule

Follow the hourly or calendar intervals, whichever occurs first. More frequent service is

required when operating in adverse conditions noted below.

1

Clean if clogged. Replace if perforated or torn.

2

Service more often under dirty or dusty conditions.

General Recommendations

Regular maintenance will improve the performance and extend the life of the pressure

washer. See any authorized dealer for service.

The pressure washer’s warranty does not cover items that have been subjected to

operator abuse or negligence. To receive full value from the warranty, the operator

must maintain the pressure washer as instructed in this manual, including proper

storage as detailed in Winter Storage and Long Term Storage.

NOTICE Should you have questions about replacing components on your pressure

washer, please visit our website at BRIGGSandSTRATTON.COM.

Some adjustments will need to be made periodically to properly maintain your pressure

washer.

All service and adjustments should be made at least once each season. Follow the

requirements in the Maintenance Schedule chart above.

NOTICE Once a year you should clean or replace the spark plug, clean or replace the

air filter, and check the spray gun and nozzle extension assembly for wear. A new spark

plug and clean air filter assure proper fuel-air mixture and help your engine run better

and last longer.

Pump Oil

DO NOT attempt any oil maintenance on this pump. The pump is pre-lubricated and

sealed from the factory, requiring no additional maintenance for the life of the pump.

Before Each Use

1. Check engine oil level.

2. Clean debris.

3. Check water inlet screen for damage.

4. Check high pressure hose for leaks.

5. Check detergent siphoning tube for damage.

6. Check spray gun and nozzle extension assembly for leaks.

7. Rinse out garden hose to flush out debris.

Pressure Washer Maintenance

Clean Debris

Dailyorbeforeuse,cleanaccumulateddebrisfrompressurewasher.Keeplinkage,

springandcontrolsclean.Keepareaaroundandbehindmufflerfreefromany

combustible debris. Inspect cooling air slots and openings on the pressure washer.

These openings must be kept clean and unobstructed.

WARNING Kickbackfromsprayguncouldcauseyoutofallresultingin

death or serious injury.

• Operatepressurewasherfromastablesurface.

• Beextremelycarefulifyoumustusethepressurewasherfromaladder,

scaffolding, or any other similar location.

• Firmlygraspspraygunwithbothhandswhenusinghighpressurespraytoavoid

injury when spray gun kicks back.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• ALWAYSpointsprayguninsafedirection,pressredbuttonandsqueezespray

gun trigger to release high pressure, every time you stop engine.

First 5 Hours

 • Changeengineoil

Every 8 Hours or Daily

 • Check/cleanwaterinletscreen

1

 • Checkhighpressurehose

 • Checkdetergentsiphoningtube

 • Checkspraygunandassemblyforleaks

 • Cleandebris

 • Checkengineoillevel

Every 25 Hours or Yearly

 • Serviceengineaircleaner

2

Every 50 Hours or Yearly

 • Changeengineoil

2

 • Inspectmufflerandsparkarrester

Every 100 Hours or Yearly

 • Servicesparkplug

 • Cleancoolingsystem

2

Not for

Reproduction

11

Pressure washer parts should be kept clean to reduce the risk of overheating and

ignition of accumulated debris.

 • Useadampclothtowipeexteriorsurfacesclean.

NOTICE Improper treatment of pressure washer could damage it and shorten its life.

• DONOTinsertanyobjectsthroughcoolingslots.

 • Useasoftbristlebrushtoloosencakedondirt,oil,etc.

 • Useavacuumcleanertopickuploosedirtanddebris.

Check and Clean Inlet Screen

Examine the screen on the pump’s water inlet. Clean it if the screen is clogged or

replace it if screen is damaged.

Check High Pressure Hose

The high pressure hose can develop leaks from wear, kinking, or abuse. Inspect the

hose each time before using it. Check for cuts, leaks, abrasions or bulging of cover,

damage or movement of couplings. If any of these conditions exist, replace the hose

immediately.

Check Detergent Siphoning Tube

Examine the detergent tube and clean if clogged. The tube should fit tightly on the

barbed fitting. Examine the tube for leaks or tears. Replace the tube if damaged.

Detergent Siphoning Check Ball

Occasionally check ball in detergent siphoning system may become stuck from

storage, dried soap, or minerals in water. The check ball can be freed by performing

thefollowing:

NOTICE Before performing this procedure, be sure you are wearing safety goggles as

described below.

1. Shut off engine and turn off water supply.

2. ALWAYS point spray gun in a safe direction, press red button and squeeze

spray gun trigger to release retained high water pressure.

3. Remove detergent siphoning hose from barbed fitting on pump.

4. Using a firm, blunt object 7/64” (2 mm) in diameter or smaller, by at least 1”

(2.5 cm) long, such as an Allen wrench, slowly insert the object into the barbed

fitting until you meet resistance. This resistance is the check ball.

5. Slowly push down until you feel the ball move slightly, push no more than 1/8”

(3 mm). Slight pressure may be required to free the ball.

6. Repeat steps 4 and 5 if necessary.

7. Reinstall detergent siphoning hose onto barb fitting.

8. Treat with PumpSaver as described in Protecting the Pump during storage to

prevent reoccurrence.

Check Spray Gun

Examine the hose connection to the spray gun and make sure it is secure. Test the

trigger by pressing the red button and making sure the trigger “springs back” into

place when you release it. You should not be able to press the trigger without pressing

the red button. Replace spray gun immediately if it fails any of these tests.

Nozzle Maintenance

Figure

20

21

22

A pulsing sensation felt while squeezing the spray gun trigger may be caused by

excessive pump pressure. The principal cause of excessive pump pressure is an orifice

clogged or restricted with foreign materials, such as dirt, etc. To correct the problem,

immediately clean the orifice using the tools included with your pressure washer and

followtheseinstructions:

1. Shut off engine and turn off water supply.

2. ALWAYS point spray gun in a safe direction, press red button and squeeze

spray gun trigger to release retained high water pressure.

3. Remove nozzle extension from spray gun.

4. Twist nozzle clockwise to stream position. Using 2mm allen wrench, remove

orifice (20,A) from end of nozzle extension.

5. Use wire (or small paper clip) to free any foreign material clogging or

restricting orifice (21,A).

6. Using a garden hose, remove additional debris by back flushing water through

nozzle extension (22). Back flush between 30 to 60 seconds. Turn adjustable nozzle

extension to stream spray and move nozzle from low to high while flushing.

7. Reinstall orifice into nozzle extension. DO NOT overtighten orifice with allen

wrench.

8. Reconnect nozzle extension to spray gun.

9. Make sure garden hose is connected to water inlet. Check that high pressure

hose is connected to spray gun and pump. Turn on water.

10. Start engine following instructions How to Start Your Pressure Washer.

11. Test pressure washer by operating with nozzle in high and low positions.

O-Ring Maintenance

Through the normal operation of your pressure washer, o–rings are used to keep

the connections of the hoses and spray gun tight and leak–free. These o-rings may

become worn or damaged.

AnO–RingMaintenanceKitisprovidedwithyourpressurewasherwhichincludes

replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet

provided in the kit to service your unit’s o-rings. Note that you will not use all of the

parts in the kit.

To remove a worn or damaged o–ring, use a small flathead screwdriver to get

underneath the o-ring and pry it off.

Engine Maintenance

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERrepairhighpressurehose.Replaceit.

• ReplacementhoseratingMUSTequalorexceedmaximumpressureratingofunit.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• ALWAYSpointsprayguninsafedirection,pressredbuttonandsqueezespray

gun trigger to release high pressure, every time you stop engine.

WARNING Risk of eye injury.

Spray could splash back or propel objects resulting in serious injury.

• Alwayswearindirectvented(chemicalsplash)safetygogglesmarkedtocomply

with ANSI Z87.1 when using or in vicinity of this equipment.

• NEVERsubstitutesafetyglassesordry-conditiongogglesforindirectvented

safety goggles.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• ALWAYSpointsprayguninsafedirection,pressredbuttonandsqueezespray

gun trigger to release high pressure, every time you stop engine.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERrepairleakingconnectionswithsealantofanykind.Replaceo-ringorseal.

WARNING Unintentional sparking could cause fire or electric shock resulting

in death or serious injury.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

• Disconnectthesparkplugwirefromthesparkplugandplacethewirewhereit

cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

• Useapprovedsparkplugtester.

• DO NOT check for spark with spark plug removed.

Not for

Reproduction

Oil

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty Certified oils for best

performance. Other high-quality detergent oils are acceptable if classified for service

SF, SG, SH, SJ or higher. DO NOT use special additives.

Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart

to select the best viscosity for the outdoor temperature range expected.

* Below 4°C (40°F) the use of SAE 30 will result in hard starting.

** Above 27°C (80°F) the use of 10W30 may cause increased oil consumption. Check

oil level more frequently.

Checking Oil Level

Figure

23

Oil level should be checked prior to each use or at least every 8 hours of operation.

Keepoillevelmaintained.

1. Make sure pressure washer is on a level surface.

2. Remove oil dipstick and wipe dipstick with clean cloth. Replace and tighten

dipstick. Remove and check oil level.

 3. VerifyoilisatFullmark(tophole)(A) on dipstick. Replace and tighten dipstick.

Adding Engine Oil

1. Make sure pressure washer is on a level surface.

2. Check oil level as described in Checking Oil Level.

3. If needed, slowly pour oil into oil fill opening to the Full mark (top hole) on

dipstick. DO NOT overfill.

NOTICE Overfilling with oil could cause the engine to not start, or hard starting.

• DONOToverfill.

• IfovertheFullmarkondipstick,drainoiltoreduceoilleveltoFullmarkondipstick.

4. Replace and tighten dipstick.

Changing Engine Oil

If you are using your pressure washer under extremely dirty or dusty conditions, or in

extremely hot weather, change the oil more often.

KEEPOUTOFREACHOFCHILDREN.DON’TPOLLUTE.CONSERVE

RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

Change the oil while the engine is still warm from running, as follows:

1. Drain fuel tank by running pressure washer until fuel tank is empty.

2. Disconnect spark plug wire and keep it away from spark plug.

3. Clean area around oil fill, remove oil fill cap/dipstick. Wipe dipstick clean.

4. Tip your pressure washer to drain oil from oil fill into a suitable container

making sure you tip your unit away from spark plug. When crankcase is empty,

return pressure washer to upright position.

5. Repeat steps 3 and 4 to add engine oil as described in Adding Engine Oil.

6. Wipe up any remaining oil.

7. Reconnect spark plug wire to spark plug.

Service Air Cleaner

Figure

24

Your engine will not run properly and may be damaged if you run it with a dirty air

cleaner. Service more often if operating under dirty or dusty conditions.

To service the air cleaner, follow these steps:

1. Slide air cleaner lever (A) to unlock (

) position and tilt cover (B) down.

2. Carefully remove air cleaner to prevent debris from falling into carburetor.

3. Wash foam air cleaner (C) in liquid detergent and water. Squeeze dry in a clean

cloth.

4. SATURATE foam air cleaner in engine oil and squeeze in a clean cloth to

remove excess oil.

5. Reinstall clean or new foam air cleaner in base (D).

6. Tilt cover up and slide lever to lock (

) position.

Service Spark Plug

Figure

25

Changing the spark plug will help your engine to start easier and run better.

1. Clean area around spark plug.

2. Remove and inspect spark plug.

3. Replace spark plug if electrodes are pitted, burned or porcelain is cracked. Use

the recommended replacement plug. See Specifications.

4. Check electrode gap with wire feeler gauge and reset spark plug gap to

recommended gap if necessary (see Specifications).

5. Install spark plug and tighten firmly.

Inspect Muffler and Spark Arrester

Inspect the muffler for cracks, corrosion, or other damage. Remove the spark arrester,

if equipped, and inspect for damage or carbon blockage. If replacement parts are

required, make sure to use only original equipment replacement parts.

Air Cooling System

Figure

26

Over time debris may accumulate in cylinder cooling fins and cannot be observed

without partial engine disassembly. For this reason, we recommend you have an

authorized Briggs & Stratton service dealer clean the cooling system per recommended

intervals (see Maintenance Schedule in beginning of Maintenance section). Equally

important is to keep top of engine free from debris. See Clean Debris.

Carburetor Adjustment

The carburetor on this engine is low emission. It is equipped with a non-adjustable idle

mixture valve. Top speed has been set at the factory. If adjustment is required, see an

authorized service dealer.

After Each Use

Water should not remain in the unit for long periods of time. Sediments or minerals

can deposit on pump parts and freeze pump action. Follow these procedures after

everyuse:

1. Shut off engine, turn off water supply, point gun in a safe direction, press red

button and squeeze trigger to relieve trapped pressure, and let engine cool.

12 BRIGGSandSTRATTON.COM

CAUTION Avoid prolonged or repeated skin contact with used motor oil.

• Usedmotoroilhasbeenshowntocauseskincancerincertainlaboratory

animals.

• Thoroughlywashexposedareaswithsoapandwater.

WARNING Exhaust heat/gases could ignite combustibles, structures or

damage fuel tank causing a fire, resulting in death, serious

injury and/or property damage.

Contact with muffler area could cause burns resulting in

serious injury.

• DONOTtouchhotpartsandAVOIDhotexhaustgases.

• Allowequipmenttocoolbeforetouching.

• Keepatleast1.5m(5ft.)ofclearanceonallsidesofpressurewasherincluding

overhead.

• Contacttheoriginalequipmentmanufacturer,retailer,ordealertoobtainaspark

arrester designed for the exhaust system installed on this engine.

• Replacementpartsmustbethesameandinstalledinthesamepositionasthe

original parts.

CAUTION Excessively high operating speeds could result in minor injury

and/or pressure washer damage.

Excessively low speeds impose a heavy load.

• DONOTtamperwithgovernorspring,linksorotherpartstoincreaseengine

speed. Pressure washer supplies correct rated pressure and flow when running at

governed speed.

• DONOTmodifypressurewasherinanyway.

Not for

Reproduction

13

2. Disconnect hose from spray gun and high pressure outlet on pump. Drain

water from hose, spray gun, and nozzle extension. Use a rag to wipe off the

hose.

3. Empty pump of all pumped liquids by pulling recoil handle about six times. This

should remove most liquid in pump.

4. Store unit in a clean, dry area.

5. If storing for more than 30 days, see Long Term Storage on next page.

Winter Storage

NOTICE You must protect your unit from freezing temperatures.

• Failuretodosowillpermanentlydamageyourpumpandrenderyourunit

inoperable.

• Freezedamageisnotcoveredunderwarranty.

To protect the unit from freezing temperatures:

1. Follow steps 1-3 in the previous section After Each Use.

2. Use pump saver, Model 6039, to treat pump. This minimizes freeze damage

and lubricates pistons and seals.

3. If pump saver is not available, connect a 3 ft. (1 m) section of garden hose to

waterinletadapter.PourRV-antifreeze(antifreezewithoutalcohol)intohose.

Pull recoil handle twice. Disconnect 3 ft. (1 m) hose.

4. Store unit in a clean, dry area.

Long Term Storage

If you do not plan to use the pressure washer for more than 30 days, you must prepare

the engine and pump for long term storage.

Protect Fuel System

Fuel Additive:

Fuel can become stale when stored over 30 days. Stale fuel causes acid and gum

deposits to form in the fuel system or on essential carburetor parts. To keep fuel

fresh, use Briggs & Stratton® Advanced Formula Fuel Treatment & Stabilizer, available

wherever Briggs & Stratton genuine service parts are sold.

For engines equipped with a FRESH START® fuel cap, use Briggs & Stratton FRESH

START® available in a drip concentrate cartridge.

There is no need to drain gasoline from the engine if a fuel stabilizer is added

according to instructions. Run the engine for 2 minutes to circulate the stabilizer

throughout the fuel system before storage.

If gasoline in the engine has not been treated with a fuel stabilizer, it must be drained

into an approved container. Run the engine until it stops from lack of fuel. The use of a

fuel stabilizer in the storage container is recommended to maintain freshness.

Change Oil

While engine is still warm, drain oil from crankcase. Refill with recommended grade.

See Changing Engine Oil in Engine Maintenance.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use

PumpSaver, Model 6039, to treat pump. This prevents freeze damage and lubricates

pistons and seals.

NOTICE PumpSaver is available as an optional accessory. It is not included with

the pressure washer. Contact the nearest authorized service center to purchase

PumpSaver.

NOTICE You must protect your unit from freezing temperatures.

• Failuretodosowillpermanentlydamageyourpumpandrenderyourunit

inoperable.

• Freezedamageisnotcoveredunderwarranty.

To use PumpSaver, make sure the pressure washer is turned off and disconnected

from supply water. Read and follow all instructions and warnings given on the

PumpSaver container.

Other Storage Tips

1. DO NOT store fuel from one season to another unless it has been treated as

described in Protect Fuel System.

2. Replace fuel container if it starts to rust. Rust and/or dirt in fuel can cause

problems if it’s used with this unit.

3. Cover unit with a suitable protective cover that does not retain moisture.

4. Store unit in a clean and dry area.

WARNING Storage covers could cause a fire resulting in death, serious

injury and/or property damage.

• DONOTplaceastoragecoveroverahotpressurewasher.

• Letequipmentcoolforasufficienttimebeforeplacingthecoverontheequipment.

WARNING The high pressure stream of water that this equipment produces

could cut through skin and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and

water is disconnected, which could result in serious injury.

• Keephighpressurehoseconnectedtopumpandspraygunwhilesystemis

pressurized.

• ALWAYSpointsprayguninsafedirection,pressredbuttonandsqueezespray

gun trigger to release high pressure, every time you stop engine.

WARNING Fuel and its vapors are extremely flammable and explosive which

could cause burns, fire or explosion resulting in death, serious

injury and/or property damage.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

• Storeawayfromfurnaces,stoves,waterheaters,clothesdryersorother

appliances that have pilot light or other ignition source because they could ignite

fuel vapors.

Not for

Reproduction

14 BRIGGSandSTRATTON.COM

Troubleshooting

Problem Cause Correction

Pump has following problems: failure

to produce pressure, erratic pressure,

chattering, loss of pressure, low water

volume.

1. Nozzle in low pressure mode.

2. Water inlet is blocked.

3. Inadequate water supply.

4. Inlet hose is kinked or leaking.

5. Clogged inlet hose screen.

6. Water supply is over 100°F (38°C).

7. High pressure hose is blocked or leaks.

8. Gun leaks.

9. Orifice is obstructed.

10. Pump is faulty.

1. Pull nozzle backward for high pressure mode.

2. Clear inlet.

3. Provide adequate water flow.

4. Straighten inlet hose, patch leak.

5. Check and clean inlet hose screen.

6. Provide cooler water supply.

7. Clear blocks in outlet hose.

8. Replace gun.

9. Clean orifice.

10. Contact local service facility.

Detergent fails to mix with spray.

1. Detergent siphoning tube is not submerged.

2. Detergent siphoning tube is clogged or cracked.

3. Nozzle is in high pressure mode.

4. Check ball stuck in detergent siphoning system.

1. Insert detergent siphoning tube into detergent.

2. Clean or replace detergent siphoning tube.

3. Push nozzle forward for low pressure mode.

4. Unstick check ball as described in Detergent Siphoning

Check Ball.

Engine runs good at no-load but “bogs” when

load is added.

Engine speed is too slow. Move throttle control to Fast position. If engine still “bogs

down”, contact local service facility.

Engine will not start; shuts down during

operation or starts and runs rough.

1. Low oil level.

2. Dirty air cleaner.

3. Out of fuel.

4. Stale fuel.

5. Spark plug wire not connected to spark plug.

6. Bad spark plug.

7. Water in fuel.

8. Excessively rich fuel mixture.

1. Fill crankcase to proper level.

2. Clean or replace air cleaner.

3. Fill fuel tank.

4. Drain fuel tank; fill with fresh fuel.

5. Connect wire to spark plug.

6. Replace spark plug.

7. Drain fuel tank; fill with fresh fuel.

8. Contact local service facility.

Engine lacks power. Dirty air filter. Replace air filter.

Product Specifications

Outlet Pressure..................................172.3 BARS (2,500 PSI)*

Flow Rate .......................................7.5 liters/min (2.0 GPM)

Water Supply Temperature ...............................38ºC (100ºF) MAX

Displacement ..................................................190 cc

Spark Plug Gap...................................... 0.76 mm (0.030 in.)

Fuel Capacity..........................................1.5 Liters (1.6 Qt.)

Oil Capacity........................................0.6 Liters (20 Ounces)

Common Service Parts

PumpSaver ..................................................... 6039

O-RingMaintenanceKit .......................................191922GS

Water Inlet Screen ............................................B2384GS

Air Cleaner ................................................... 797301

Resistor Spark Plug ......................................802592 or 5095

Long Life Platinum Spark Plug ...................................... 5062

Engine Oil Bottle ......................................100005 or 1000028

Fuel Stabilizer ........................................1000120 or 100117

Spark Arrester................................................. 398067

Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power &

Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM;

horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air cleaner

installed whereas gross power values are collected without these attachments. Actual gross engine power will be higher than net engine power and is affected by, among other

things, ambient operating conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gas engine may not develop the rated gross

power when used in a given piece of power equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner,

exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due

to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

* This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association (PWMA) standard PW101-2010 (Testing and Rating Performance of Pressure

Washers).

Not for

Reproduction

15

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC PRESSURE WASHER OWNER WARRANTY POLICY

LIMITED WARRANTY

Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship or

both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for and is subject to

the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at BRIGGSandSTRATTON.com. The

purchaser must contact the Authorized Service Dealer, and then make the product available to the Authorized Service Dealer for inspection and testing.

There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one year from purchase,

or to the extent permitted by law. All other implied warranties are excluded. Liability for incidental or consequential damages are excluded to the extent exclusion

is permitted by law. Some states or countries do not allow limitations on how long an implied warranty lasts, and some states or countries do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also

have other rights which vary from state to state or country to country.**

** In Australia - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and

for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality

and the failure does not amount to a major failure. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at BRIGGSandSTRATTON.COM, or by

calling 1300 274 447, or by emailing or writing to [email protected], Briggs & Stratton Australia Pty Ltd, 1 Moorebank Avenue, NSW, Australia, 2170.

The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the period of time stated above. “Consumer use”

means personal residential household use by a retail consumer. “Commercial use” means all other uses, including use for commercial, income producing or rental purposes. Once

equipment has experienced commercial use, it shall thereafter be considered as commercial use for purposes of this warranty.

NOWARRANTYREGISTRATIONISNECESSARYTOOBTAINWARRANTYONBRIGGS&STRATTONPRODUCTS.SAVEYOURPROOFOFPURCHASERECEIPT.IFYOUDONOT

PROVIDEPROOFOFTHEINITIALPURCHASEDATEATTHETIMEWARRANTYSERVICEISREQUESTED,THEMANUFACTURINGDATEOFTHEPRODUCTWILLBEUSEDTO

DETERMINE THE WARRANTY PERIOD.

ABOUT YOUR WARRANTY

We welcome warranty repair and apologize to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs. Most warranty repairs are handled

routinely, but sometimes requests for warranty service may not be appropriate. For example, warranty service would not apply if equipment damage occurred because of misuse,

lack of routine maintenance, shipping, handling, warehousing or improper installation. Similarly, the warranty is void if the manufacturing date or the serial number on the pressure

washer or engine has been removed or the equipment has been altered or modified. During the warranty period, the Authorized Service Dealer, at its option, will repair or replace

anypartthat,uponexamination,isfoundtobedefectiveundernormaluseandservice.Thiswarrantywillnotcoverthefollowingrepairsandequipment:

• NormalWear:OutdoorPowerEquipment,likeallmechanicaldevices,needsperiodicpartsandservicetoperformwell.Thiswarrantydoesnotcoverrepairwhennormaluse

has exhausted the life of a part or the equipment.

• InstallationandMaintenance:Thiswarrantydoesnotapplytoequipmentorpartsthathavebeensubjectedtoimproperorunauthorizedinstallationoralterationand

modification, misuse, negligence, accident, overloading, overspeeding, improper maintenance, repair or storage so as, in our judgment, to adversely affect its performance

and reliability. This warranty also does not cover normal maintenance such as air filters, adjustments, fuel system cleaning and obstruction (due to chemical, lime, dirt, and

so forth).

• OtherExclusions:Thiswarrantyexcludeswearitemssuchasquickcouplers,seals,o-rings,pumpsthathavebeenrunwithoutwatersuppliedordamageormalfunctions

resulting from accidents, abuse, modifications, alterations, or improper servicing or freezing or chemical deterioration. Accessory parts, such as guns, hoses, nozzle

extensions (wands), and nozzles, are excluded from the product warranty. This warranty excludes used, reconditioned, and demonstration equipment and failures due to

acts of God and other force majeure events beyond the manufacturers control. 198203E, Rev. D, 04/17/2012

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC

MILWAUKEE, WI, USA

Effective April 1, 2012; replaces all undated Warranties and all Warranties dated before April 1, 2012.

2 years

90 Days

Consumer Use

Commercial Use

WARRANTY PERIOD

Not for

Reproduction

Page is loading ...