FläktGroup EULZ-14 Air distributor Installation guide

Hello! I've reviewed the installation instructions for the Fläkt Woods EULZ-13 Air Distributor. This document details how to install the air distributor, focusing on fitting the support brackets, sliding the rods into the fabric, and securing everything with cotter pins. I'm ready to answer your questions about this document and the installation process.
Is the EULZ-13 air distributor normally supplied fitted?

What should be done if the air distributor is not fitted?

How are the rods secured?

EULZ-13 Air Distributor

Fläkt Woods 3991 GB 03.02 1 Specifications are subject to alteration without notice

EU Air Handling Unit INSTALLATION

Fitting

The EULZ-13 air distributer is normally supplied fitted

but if not fit the support brackets to the top and bottom

of the fan outlet. Slide the rods into the folds provided at

each end of the fabric and then through each of the end

holes at the ends of the support brackets. Secure with the

cotter pins provided.