Canon G7000 Series Inkjet Printer User guide

4/6/23, 10:43 AM

Canon : Inkjet Manuals : G7000 series : Cleaning the Print Head

https://ij.manual.canon/ij/webmanual/Manual/All/G7000 series/EN/UG/ug-135.html

1/1

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed

nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition.

Cleaning the print head consumes ink, so clean the print head only when necessary.

1. Check that printer is turned on.

2. Press the Setup button, use the button to select Maintenance, and press

the OK button.

LCD and Operation Panel

3. Use the button to select Cleaning and then press the OK button.

The printer starts cleaning the print head.

Do not perform any other operations until the printer completes the cleaning of the print

head. This takes about 2 minutes.

4. Check the print head condition.

To check the print head condition, print the nozzle check pattern.

Note

If the problem is not resolved after cleaning the print head twice, clean the print head

deeply.

Download PDF