Westbrass YE531D-12R Installation guide

Westbrass
Brand
Westbrass
Model
YE531D-12R
Type
Installation guide
3/4” x 1/2” IPS Face Bushing
3/4” IPS
Adjusts 3/4”
2429 East Olympic Blvd. Los Angeles, CA 90021
t'"9tXXXXFTUCSBTTDPN
E535D-12F
;JOD%JWFSUFS5VC4QPVU
wPSw*14"EKVTUBCMF%FQUI
5-1/4”
1”
1-1/2”
2-3/8”
Telescoping Tub spout in 1/2” or 3/4” IPS
Instructions:
1. Face bushing adapts from 1/2” IPS to 3/4” IPS. Dry
t spout rst.
2. Measure distance pipe projects from wall. Spout
will adjust from 1/2” to 1-1/2” from wall by rotating
center Hex Screw till spout is ush to wall.
3. Wrap male pipe ends from wall and bushing with
PTFE tape or apply pipe dope, and thread to wall.
4. Silicone Tub and tile caulk can be used to seal
spout to wall. Only do the top 75% of the spout.
Instrucciónes:
1. El casquillo de rosca se adapta de 1/2 " IPS a 3/4"
IPS. Enrosque primero la boquilla.
2. Mida los proyectos de tubos de distancia desde la
pared. El pico se ajustará de 1/2 "a 1-1 / 2" de la
pared girando el tornillo hexagonal central hasta
que el pico esté al ras de la pared.
3. Envuelva los extremos macho de la pared y el
casquillo con cinta de PTFE o aplique la tubería de la
tubería, e hilo a la pared.
4. Silicona La caldera de la tina y del azulejo se
puede utilizar para sellar el canalón a la pared. Sólo
hacer el 75% superior del surtidor.
Adjusting
Hex Screw
WESTBRASS s%/LYMPIC"LVD,OS!NGELES#!
ssORDERS WESTBRASSCOMsWWWWESTBRASSCOM
Fine Decorative Plumbing Since 1935
WESTBRASS
535D-12F - Diverter Style Spout
E535D-12F - Diverter Style Spout
E535-12R - Non-Diverter Spout
  • Page 1 1

Westbrass YE531D-12R Installation guide

Westbrass
Brand
Westbrass
Model
YE531D-12R
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents