HNE HiPRESS 2 is a portable high-performance fire extinguisher that gives you extra safety and capabilities during action. With constant working pressure, it offers excellent fire rating and can be used in various scenarios. The lightweight design makes it easy to carry, even during extended periods. The device is suitable for fighting class A and B fires, making it ideal for use in homes, offices, vehicles, and other locations. The HiPRESS 2 comes with a backpack for easy transportation and is refillable, ensuring readiness for multiple uses.
HNE HiPRESS 2 is a portable high-performance fire extinguisher that gives you extra safety and capabilities during action. With constant working pressure, it offers excellent fire rating and can be used in various scenarios. The lightweight design makes it easy to carry, even during extended periods. The device is suitable for fighting class A and B fires, making it ideal for use in homes, offices, vehicles, and other locations. The HiPRESS 2 comes with a backpack for easy transportation and is refillable, ensuring readiness for multiple uses.
MADE IN GERMANY
www.hne.ag
USER MANUAL
HiPRESS
PORTABLE
HIGH PERFORMANCE
FOAM EXTINGUISHERS
MADE IN GERMANY www.hne.ag
HiPRESS 2
Content Page
Important information.........................
Symbols and warnings........................
Unpacking.........................................
Storage............................................
Extinguishing agent............................
Device and filling equipment................
Filling of the liquids.............................
Filling of compressed air.......................
Jet gun.............................................
Applying the device.............................
Inspections........................................
Service and maintenance.....................
Technical data....................................
Replacement parts.............................
Warranty...........................................
Declaration of conformity.....................
Contact.............................................
Servicing notes..................................
1
2
2
3
3
4 - 5
6 - 8
9 -11
12
13
13
14
15
16 -17
18
19
20
21
MADE IN GERMANY
www.hne.ag
HiPRESS 2
Important basic information
This manual is an important part of the extinguisher. It refers
to safe and proper use of the device in the interest of safety.
It has to be accessible for users and must be passed on in
case of sale.
We assume no liability for injuries, damage or malfunctions,
which arise due disregard of these user instructions.
The warranty for this device applies for flaws of material,
assembly, quality and function. It is void if the device is not
applied, operated and maintained as described.
Without our written permission, no content of this manual
shall be reproduced or forwarded to others. All technical
specifications and illustrations are subject to copyright.
Technical modifications are subject to change without notice.
thank you for choosing one of our products. You have acquired
premium class fire fighting equipment, worldwide known for
superior performance and highest quality.
This manual will help you to keep operational readiness and
lifespan of your HNE-device on highest level and to take full
advantage of its technical superiority. Please read it carefully
before using the extinguisher for the first time. In case of
questions or technical problems, please contact us.
The extra lightweight HiPress 2 is explicitly designed for use by
security forces. The extra high and constant working pressure
offers excellent fire rating and increased safety and capabilities
for fire fighters during action.
Dear customer,
MADE IN GERMANY www.hne.ag
HiPRESS 2
•Filling adapter with pressure reducer and gauge
•Steel pressure cylinder (CFRP optional), 2 Liter/300 bar
•Transport case for device(s) and filling equipment
Symbols and meaning
Important information is highlighted with the following icons.
Please note it with particular attention in the interest of safety.
Indication of possible danger. Disregard can result in
damage or hazard to device, vicinity, operator or other
persons.
Important information for proper use and handling of
extinguisher, necessary tools, accessories and supplies.
Warning of possible hazards by pollutants and chemicals.
Legal requirements for protection of environment must
be observed.
Additional information, advice and recommendations.
•Extinguisher with hose and jet gun
•Ergonomic backpack wit adjustable straps and quick fasteners
•Plastic bottle with portioned foam concentrate for first filling
Scope of delivery
Unpacking
The whole packing material is recyclable, please dispose
of it in an environmentally responsible way. Check the
condition of packaging and content upon delivery and
contact us immediately in case of damage to the device
due transport.
Accessories (not included):
MADE IN GERMANY
www.hne.ag
HiPRESS 2
In filled condition the extinguisher must be stored in an upright
position. The environment should be dry, cool and dust-free.
Avoid direct sunlight; in the long run, ultraviolet light harms
plastic, rubber and textiles. If filled with regular extinguishing
agent, do not expose the device to temperatures near freezing
point or below. Frozen extinguishing media causes irreparable
damage! Use frost proof additives for cold conditions.
Extinguishing agents
Clean tap water represents the simplest way of filling for non-
polluting and cost-free user training. For foam generation, fill
the device with a mixture that is listed on the containers label.
As suitable extinguishing agents we recommend:
Regular range of temperature: +5 to +60° C
With frost proof extinguishing agent: -25 to +60° C
Do not store the filled extinguisher in horizontal position.
Storage
optimized for HNE-high pressure technology to achieve
superior extinction ratings. For fire class A + B.
MG 6-30
Premix
HNE
63 A
AFFF 6%
Ready-for-use agent with -30°C freeze protection.
Suitable for fire class A + B.
most common foam agent against fires of class A + B.
NOTE: With the use of unlisted extinguishing agents,
the device no longer meets the EN-3 approval. In this
case, successful fire extinction and the safety of the
specified minimum distance to electrical installations
can not be guaranteed by HNE!
Overview
actuator
gauge for
working pressure
jet gun
safety catch
connector for
compressed air
pressure
vessel
head piece
(separable)
MADE IN GERMANY www.hne.ag
HiPRESS 2
Druck-
schlauch
foam nozzle
MADE IN GERMANY
www.hne.ag
HiPRESS 2
Compressed air cylinder
stop cock
Quick
coupling
Safety valve
Filling adapter
Gauge for
compressed
air cylinder
Hand wheel for
bottle connection
Protection cap
Pressure reducer
Steel (CFFR optional)
2 Liter / 300 bar
Hand wheel
DIN-thread
for 300 bar
Protection cap
VARIO 9
HiPRESS 4 und 4duo
MADE IN GERMANY www.hne.ag
HiPRESS 2
Basic rules for refilling
The extinguisher achieves optimal performance only when
accurately filled. Prepare things thoroughly and perform all steps
with necessary care. We recommend a clean and steady work
area with water supply.
Avoid spilling of extinguishing agent. Flush affected
surfaces and components with water.
Empty the container completely before filling.
Dispose of chemicals with ecological responsibility.
Do not use any leftover extinguishing fluid again.
Never overfill the container.
The threads of container and lid have to be free of dirt
and debris. Clean it if necessary and apply a light coat
of silicone grease.
Always wear goggles, gloves and apron when dealing
with extinguishing agent. The chemicals can cause skin
irritation or allergies.
After contact with eyes or mouth, immediately flush out
with plenty of clean water.
Also observe the safety instructions in the data sheet of
the extinguishing agent manufacturer.
Extinguishing agents are polluting and hazardous to
health. They must not seep into soil or sewer system.
Use a suitable container to dispose of it in an
environmentally friendly way.
We recommend to mark the extinguisher after filling as
ready for use. For example, a paper seal can state the
date and type of extinguishing agent.
VARIO 9
MADE IN GERMANY
www.hne.ag
The head piece with its riser
pipe can now be removed
from the container.
Always relief the system
from any residual pressure
before opening. Actuate the
jet gun until no more
hissing is heard. Only then
you may unscrew the
pressure vessel.
Even after complete discharge
of the extinguisher, new
pressure may occur due rising
temperature.
Venting and opening:
Hold the head piece and turn
the container counterclockwise
until it is completely separated
HiPRESS 2
MADE IN GERMANY www.hne.ag
HiPRESS 2
The container requires 1.5 liters of total filling volume. For user
training, you can use pure water. The amount of additive for foam
generation depends on the used extinguishing agent. Approved
foam agents and their dosage are listed on the label of the
container and must be strictly observed.
Closing the container:
Filling of the liquids:
apply
silicone
grease
2
H2O
First, fill the exact
amount of water
into the container...
1
Put the head piece back into the vessel
and screw it tightly.
... then add the foam
concentrate. The liquids
are self-mixing, stirring
is unnecessary.
NOTE:
A thin layer of silicon grease on thread and sealing
surface prevents corrosion and facilitates opening.
Tightening the container by hand is
sufficient. Do not use tools.
Check the filter holes at the end of the riser
pipe. Remove dirt.
●
●
●
Be sure that the container is completely empty and clean
before filling.
filter holes
riser
pipe
MADE IN GERMANY
www.hne.ag
HiPRESS 2
internal
thread air
outlet
Pressurized vessels are hazardous for user and vicinity
in case of negligence or mishandling. Always use filled
air cylinders and extinguishers with due diligence.
Never overfill air cylinders. Maximum pressure: 300 bar.
Use only approved air cylinders with certification.
Filling of compressed air
After closing, the filled container needs to be charged with working
pressure (18 bar). Matching compressed air cylinders and filling
adapters are available as accessories (see page 5).
Before connection:
Please pay attention to the following points before you connect
the filling adapter to the compressed air cylinder:
outer
thread
O-ring
A full compressed air cylinder (2 liters) is sufficient for
app. 60 fillings of a HiPRESS 2
The threads of air cylinder and regulator must be free of
dirt and debris. Clean if necessary, but do not lubricate.
Check the condition of the O-ring at the pressure reducer.
Replace it in case of cracks or loss.
Do not use tools to tighten the knurled hand-wheel of the
pressure reducer.
Press the outer part of the quick
coupling backward and let it slip
back after connection.
www.hne.ag
MADE IN GERMANY
HiPRESS 2
Check the tightness of the quick
coupling. The stop cock has to
be in closed position.
Connect the low pressure end of the filling adapter with the head
piece of the HiPRESS via the quick coupling.
knurled
hand-wheel
After attaching the quick coupling, turn the stopcock into
closed position (transversely to the hose).
Remove the protective caps on pressure reducer and
cylinder valve. Attach the pressure reducer to the
thread of the cylinder valve and screw it tightly
with the knurled hand-wheel. Tightening
by hand is sufficient;
do not use tools.
Connecting the filling adapter :
stop cock
(closed)
connection nipple
for quick coupling
MADE IN GERMANY
www.hne.ag
HiPRESS 2
Charging the working pressure :
The outlet of the filling adapter is now
leading charging pressure (18 bar) for
the extinguisher.
The inlet pressure depends on the filling
level of the air cylinder and is displayed
on the gauge of the pressure reducer.
Open the outlet by turning the stop cock 90° left.
Air is flowing into the container, until the working
pressure is reached. The device is full as soon as no
more air flow is heard.
Check the gauge at the device. The
pointer should be at the beginning of the
green scale range. You can close and
uncouple the filling adapter now.
stop cock:
transversely
lengthways
= closed
= open
The extinguisher is now ready again !
Be sure, the stop cock of the low-pressure outlet is in closed
position (transversely to the hose). Open the valve of the
compressed air cylinder slowly and completely.
Lock the trigger of the jet
gun with the red safety catch
against accidental actuation.
Unlock the safety catch not
before the next use of the
extinguisher.
MADE IN GERMANY
HiPRESS 2
compact jet
range app. 9 m
The jet gun
Every HiPRESS system is equipped with a recoilless jet gun. Range
and flow rate are variable by stepless actuation. This increases
efficiency and duration significantly when fighting small fires. A
foldable safety catch prevents accidental actuation.
Safety catch: unlocked in upper position.
●Caution, compact jet with up to 9 meters of range.
●Never aim directly at the face of people or living
animals.
●Hazard of suffocation under a layer of foam.
Caution when jetting into
electrical installations !
Keep a minimum safety distance of 1 meter within the
limit of 1000 Volts !
Actuator:
press fully for
maximum jet range
and throughput.
MADE IN GERMANY
www.hne.ag
HiPRESS 2
The badge for the next inspection date must be updated
after every inspection.
Legally prescribed inspections are country specific and
vary. Please keep yourself informed about the
regulations in your country.
Compressed air cylinders too must be approved and
tested regularly. Note the admission of compressed air
cylinder you are using
Applying the device
The HiPRESS 2 is a stored-pressure
extinguisher. You just have to turn the
safety catch at the tripping lever into
unlocked position. The jet of foam is
triggered by pressing the lever. Jet
range and throughput are adjustable to
the situation by steplessly actuation.
date of
manufacturing
date of
next
inspection
Users must be sufficiently familiar with the device
by instruction and training.
Legal inspections
Extinguishers are subject of
periodic checks for function and
safety. The owner is responsible for
compliance with prescribed intervals.
Therefore, the container is labeled
with badges for the date of
manufacturing and the maturity of
the next inspection. The punched-out
areas mark the exact period.
MADE IN GERMANY www.hne.ag
HiPRESS 2
HNE-extinguishers have to be inspected regularly for function
and readiness by qualified personnel, but at least every 12
months according to the following inspection scope:
•General condition and cleanliness
•Legibility, completeness and correctness of the labelling
•Fittings, hoses and attachment parts
•Damage to protective coating and possible corrosion
•Plastic parts of jet gun and backpack for cracks or deformation
•Smooth operation of all moving parts and switches
•Age of Filling: change at the latest after 12 months
•Condition of internal coating: check with inspection lamp
•Condition of seal rings in filler neck and at pressure reducer
•Tightness of tension belts (when equipped with backpack)
Check and clean the extinguisher thoroughly after every
use, even if it has not been applied.
Check the fully operational condition. If necessary,
restore it by repair within the limits of your legitimation.
All spare parts must be approved for use with the device.
To gain full performance, extinguishing media in the
container must not be older than 12 months. Do not use
any leftover extinguishing agent again.
After maintenance or repair, the extinguisher should be
labeled with filling date and content.
NOTE: As a highly safety-relevant element, the pressure
reducer (filling adapter) is absolutely maintenance-free.
Any work at it is solely reserved for HNE. Unauthorized
action leads to the complete loss of warranty.
Service and maintenance
MADE IN GERMANY
Technical data
www.hne.ag
SPEZIFIKATION
HiPRESS 2
volume of vessel
2 liters
filling volume
1.5 liters
propellant
compressed air
working pressure
18 bar
duration
app. 10 sec.
jet range
*
app.
9 m
temperature range
*
-25 to 60° C
weight
(empty)
app. 3.5 kg
weight
(filled)
app.
5.5 kg
height
440 mm
diameter of vessel
130 mm
certification
SQ 61/15
HiPRESS 2
Depending on temperature,
wind and type of additive.
*when using frost proof foam agent
The devices are approved
as special extinguishers
according to EN 3
*
MADE IN GERMANY www.hne.ag
HiPRESS 2
13
Replacement parts - overview
MADE IN GERMANY
www.hne.ag
Description
Number
Carrying frame (backpack)
HiPRESS 2 01
Filling nipple M10x1
02
Retaining strap
03
Manometer 0
-28 bar 04
Sieve d=2.5mm
05
Vessel for
HiPRESS 2 (red) 06
Vessel for HiPRESS 2 (black)
07
Pressure hose
08
Jet gun with nozzle 2.8mm
09
Head piece HiPRESS 2
10
Pressure
hose (cut resistant) 11
Extinguishing agent AFFF 6%, 90 ml
12
Safety catch for jet gun
13
HiPRESS 2
Replacement parts HiPRESS 2
Please contact our service for orders
MADE IN GERMANY www.hne.ag
HiPRESS 2
Manufacturer warranty
... the defect occurs later than 2 years after date of purchase.
... the device has not been used according to its purpose.
... maintenance or inspection intervals are not respected.
... the device was subject of unauthorized repair.
... unapproved parts were used for maintenance or repair.
... the device was modified by customer or third party.
... the device was damaged by external influences.
... relevant instructions in this manual have been disregarded
Technical reliability and sturdiness are indispensable when
manufacturing life-saving equipment. Only high quality parts
from certified suppliers are used and each assembled device is
tested thoroughly for pressure safety, function and performance.
For all HNE products, a limited warranty period of 2 years
applies for any defects in material, assembly, function and
performance starting from the date of commissioning.
For at least 10 years all spare parts and services for
maintenance and repair are available after sale.
The warranty is void if...
If a recognized warranty case occurs, the decision for
replacement or repair of single components or the entire device
lies solely with HNE. Incurred costs for replacement parts, repair
and transportation are assumed by HNE.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
HNE HiPRESS 2 is a portable high-performance fire extinguisher that gives you extra safety and capabilities during action. With constant working pressure, it offers excellent fire rating and can be used in various scenarios. The lightweight design makes it easy to carry, even during extended periods. The device is suitable for fighting class A and B fires, making it ideal for use in homes, offices, vehicles, and other locations. The HiPRESS 2 comes with a backpack for easy transportation and is refillable, ensuring readiness for multiple uses.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Victory Fire & Gas WC6L Owner's Service Manual
-
Radio Shack ET-182 User manual
-
Davey DSM-F2-2.2-3 Operating instructions
-
Hoshizaki KMS-1402MLJ User manual
-
GE 164D3333P034 User manual
-
-
Jandy LXI Operating instructions
-
Amerex Novec Wheeled Units 775 and 776 Owner's manual
-
Cornelius Viper Elite User manual
-
