MODEL: M11879
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH
PRIOR TO ASSEMBLY.
Assembly Time: 10 Minutes.
UNPACK THE SOLAR LED LIGHT STRING
The following parts should be included in your
solar light kits; (3) Solar LED Lights, (1) Solar
panel, (1) Adjustable bracket and stake set, (1)
Spade Bit.
TOOLS
A drill will be required for deck or hard surface
installation.
3.) With the holes in place, slide the LED light
body through the bottom of your deck.
4.) Once threaded through the hole, screw the
lens to the LED body.
5.) Gently pull the string under the deck to
lock into place.
DECK INSTALLATION
1.) Using your drill with the included spade bit,
carefully drill through your deck.
2.) Remove the lens from the body of the LED
light body.
GROUND INSTALLATION
Bury the Solar LED Light String bodies in grass,
mulch, or gravel. You may wish to create a small
trench between lights in order to conceal the
cable.
TIP:
Use your drill and the included spade bit for
greater precision.