Bauknecht KR 19F6 A++ WS Program Chart

Brand: Bauknecht

Model: KR 19F6 A++ WS

Type: Program Chart

Bauknecht KR 19F6 A++ WS is a feature-rich refrigerator that offers optimal food storage conditions and energy-saving functions. With its 6th Sense/Green Intelligence technology, it automatically maintains the ideal temperature and humidity levels to keep your food fresher for longer. The Smart Display allows you to easily adjust the temperature settings and activate functions like the Holiday Mode for energy saving during extended absences. The refrigerator also features a Multiflow system with cold air distribution to ensure uniform cooling throughout the fridge.

Før man anvender apparatet, skal man

omhyggeligt læse den medfølgende

vejledning.

SMART DISPLAY

Denne valgfri funktion kan bruges til at spare energi. Smart Display aktiveres/

deaktiveres ved at trykke og holde på knapperne til Ferie

og Lynafkøling

samtidig i 3 sekunder, indtil der høres et lydsignal. Tryk på en knap for

midlertidigt at genaktivere displayet. Husk, at denne funktion ikke afbryder

forbindelsen til strømforsyningen, men kun reducerer det eksterne displays

strømforbrug (se Brugervejledning).

Bemærk: Når Green Intelligence ProFresh er deaktiveret og Smart Display er

aktiveret: alle kontrollamper slukkes på displayet.

5019 420 00034

FIGB NOSEGRITPTESNLFR

Printed in Italy 11/13 - Whirlpool

Knappen til ON/STANDBY

Apparatet sættes i standby ved at trykke og holde

på knappen i 3 sekunder. Alle ikoner slukkes

undtagen indikatoren for On/standby . Tryk én gang

(kort) på denne knap for at genaktivere apparatet igen.

(se Brugervejledning)

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

GREEN INTELLIGENCE PROFRESH

Denne funktion fungerer automatisk for at sikre optimale betingelser for de opbevarede

fødevarer. Funktionen

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

Green Intelligence ProFresh deaktiveres ved at trykke og

holde på knapperne for Temperatur

og Lynafkøling samtidig i 3 sekunder, indtil

der høres et lydsignal og ikonet for Green Intelligence ProFresh

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

slukkes, hvilket

bekræfter, at funktionen er blevet deaktiveret. Gentag ovenstående fremgangsmåde for

at genaktivere funktionen.

Bemærk: Deaktivering af funktionen slukker for ventilatoren i køleskabet.

VENTILATOR

Ventilatoren forbedrer temperaturfordelingen i apparatet,

hvilket giver en bedre opbevaring af madvarerne.

Ventilatoren er som standard tændt. Ventilatoren

slukkes ved at trykke og holde på knapperne for

Temperatur og Lynafkøling

samtidig i 3 sekunder,

indtil der høres et lydsignal og ikonen for Green

Intelligence ProFresh

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

slukkes, hvilket bekræfter,

at ventilatoren er blevet slukket. Gentag ovenstående

fremgangsmåde for at tænde for ventilatoren. Som

bekræftelse lyder der et signal, og ikonet tændes.

Bemærk: Se “RÅD OM ENERGIBESPARELSE” i

brugervejledningen for grunde til at slukke for ventilatoren.

Knappen til LYNAFKØLING

Funktionen Lynafkøling anvendes til at øge kølingen i køleafdelingen. Det

anbefales at bruge denne funktion, når der anbringes en meget stor mængde

madvarer i køleafdelingen. Tryk på knappen til Lynafkøling

for at aktivere

eller deaktivere funktionen. Når funktionen er aktiveret, tænder indikatoren for

Lynafkøling. Funktionen deaktiveres automatisk efter 6 timer, eller manuelt

ved atter at trykke på knappen

Lynafkøling.

ALARMTABEL

ALARMTYPE Signal Årsag Løsningsforslag

Alarm for åben dør.

Lydsignalet aktiveres, og alarmindikatoren

blinker.

Døren har været åben i mere end 2 minutter. Luk dørene og tryk på knappen Stop alarm for at slukke for lydsignalet.

Funktionsfejl. Bogstavet “F” blinker på displayet (°C). Funktionsfejl med apparatet. Kontakt Servicecenteret.

1. Betjeningspanel

2. Kontrollamper*

3. Ventilator

4. Valgfri belysning i Multiflow*

5. Hyldeopdeler*

6. Multiflowsystem med kold luft*

7. Flaskehylde*

8. Sensordæksel

9. Nul grader-skuffe*

10. Typeplade med varenavn

11. Afkølingsrum (bedst til kød og fisk)

12. Hylder

13. Frugt-/grøntsagsskuffe

14. Rumopdeler i grøntsagsskuffe*

15. Dørvendingssæt*

16. Æggebakke*

17. Flaskeholder*

18. Hylder i døren

19. Lugens pakning

* Findes på valgte modeller

TÆNDING AF SKABET

Når strømstikket sættes i stikkontakten, starter

apparatet automatisk. Når der er tændt for

apparatet, skal der gå mindst 4-6 timer, inden der

anbringes madvarer i det. Når apparatet sluttes til

strømforsyningen, tænder displayet, og alle ikonerne

vises i ca. 1 sekund.

De fabriksindstillede værdier for fryseafdelingen tænder.

ÆNDRING AF DØRENS ÅBNINGSRETNING

- se den medfølgende brugervejledning (Version_1)

Det anbefales, at ændring af dørens åbningsretning

udføres af to personer. Dørens åbningsretning kan

ikke ændres for:

- modeller med integreret håndtag

- modeller med glaspanel på døren.

Specifikationer, tekniske data og billeder kan

variere afhængigt af modellen

ALARM-indikator

(se Alarm-tabellen herunder)

STOP ALARM-knap

Tryk på denne knap for at deaktivere lydsignalet.

Knappen til FERIE

Denne funktion kan aktiveres for at reducere apparatets energiforbrug i en længere periode.

Før funktionen aktiveres, skal letfordærvelige varer fjernes fra køleafdelingen, og døren holdes lukket, så skabet opretholder en tilstrækkelig temperatur til

at forhindre dannelsen af dårlig lugt (+12° C). Funktionen aktiveres/deaktiveres ved at trykke på knappen til Ferie i 3 sekunder.

Når funktionen er aktiveret, lyser det tilhørende symbol, og temperaturen i køleskabet vil blive sat til en højere indstilling (temperaturdisplayet viser den nye

temperatur på +12° C). Ændring af temperaturindstillingen deaktiverer automatisk funktionen.

TEMPERATURDISPLAY

Knappen til TEMPERATUR

Tryk på knappen til Temperatur for at ændre temperatur:

Værdien ændres trinvist mellem 8° C og 2° C, hver gang der

trykkes på knappen.

Bemærk: De viste temperaturindstillinger svarer til den

gennemsnitlige temperatur i hele køleskabet.

OVERSIGTSVEJLEDNING