Moen 2570 Specification

Category
Sanitary ware
Type
Specification
Specifications
DESCRIPTION
Brass construction
1/2" CC, or IPS connections with 1/4 turn stops
Pressure balancing, four port, cycle valve
OPERATION
Adjustable temperature limit stop to control maximum hot water
temperature
Pressure balancing mechanism maintain selected discharge temperature to
± 3°F
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certied to meet ASME A112.18.1/CSA B125.1,
ASSE 1016, and all applicable requirements referenced therein
Moen’s Posi-Temp® and Moentrol® valves with graphite composite
spools combined with Moens Eco-performance showerheads meet the
performance requirements of
pressure and temperature variation of ASSE1016 when
tested as low as 1.5 gpm
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
POSI-TEMP® VALVE
Pressure-Balancing Valve with
1/4 Turn Stops
Single Pack
Models: 2570 (CC), 2590 (IPS)
Bulk Packed
Models: 62370 (CC), 62390 (IPS)
(Bulk packed 12 per carton)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
TUB
SHOWER
FLOOR
1/2" CC
SUPPLY
2-5/16" (59mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-7/8" MAX.
(73mm)
7/8" MIN. CC & IPS (22mm)
1"
(25mm)
FLOOR LINE
1"
(25mm)
L
C
2-1/8"
(54mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
Rev. 7/19
  • Page 1 1

Moen 2570 Specification

Category
Sanitary ware
Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI