Moen 2520 Specification

Type
Specification

This manual is also suitable for

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
®
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
TUB
SHOWER
FLOOR
1/2" CC
SUPPLY
2-3/4" (70mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8"
(35mm)
FLOOR LINE
1 3/8"
(35mm)
L
C
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
Rev. 3/00
POSI-TEMP
®
VALVE
Pressure-Balancing Valve
Models: 2520 (CC), 2510 (IPS) - Single Pack
62320 (CC), 62300 (IPS) - Bulk Packed
(Bulk packed 12 per carton)
NOTE: See reverse side
for illustrated parts
DESCRIPTION
Brass construction
1/2" CC or IPS connections
Pressure balancing, four port, cycle valve
OPERATION
Adjustable temperature limit stop to control
maximum hot water temperature
Pressure balancing mechanism maintain selected
discharge temperature to ± 2°F
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
  • Page 1 1

Moen 2520 Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI