FOOD EQUIPMENT
Item # ________________________________
Quantity_______________________________
C.S.I. Section 11400
701 S Ridge Avenue, Troy, OH 45374 • 1-800-960-1190
Data GateWeigh™
Data GateWeigh™
“Your Gateway to integrated host
driven scale management”
■ The Data GateWeigh is a communications
vehicle to seemlessly transfer information
to and from networkable scales.
■ It is a communication driver software package
that uses your data files and user interface for
host support. It can also use ScaleMaster™
4.0e ASCII files.
■ Supported by Hobart Headquarters field
engineering to ensure a smooth implementation
on every installation.
■ “State-of-the-Art software for State-of-the-Art
Hobart scales”.
SCALE NETWORKS
SUPPORTED:
■ Serial twisted pair (Belden 8761)
■ Ethernet 10BaseT
■ TCP/IP communications protocol
■ Manufacturer specific serial communications
protocol
SOFTWARE FEATURES:
■ Allows single source data-entry and integrity.
■ Uses your host files for scale maintenance. The
Data GateWeigh has a customizable translator
built in!
■ Supports “ALL” Hobart networkable scales.
■ Supports scales that are not Hobart to protect
your investment.
■ Supports serial and IP scales from the same
Data GateWeigh application.
■ Modular design via our format and protocol
.ini files.
■ 32 bit event-driven software design.
■ Built-in translator that supports ScaleMaster
4.0e ASCII files.
■ Retries based on a frequency level.
■ Allows you to run continuously in the back-
ground or on demand when required to pick up
files automatically.
■ Extensive logging levels to give your support
team pro-active scale troubleshooting.
MODEL:
■ Version 1.0
HARDWARE REQUIREMENTS:
■ One dedicated RS-232 Serial Port for serial
communications
■ Ethernet 10BaseT connectivity for TCP/IP
communications
■ Intel 486DX2 66Mhz
■ IBM RS/6000 or PowerPC (AIX Unix)
■ 8 MB RAM
■ 10 MB Hard Disk Space
OPERATING SYSTEM SUPPORT:
❏ Windows NT
❏ Various Unix Operating Systems
❏ Windows 95/98
OPTIONAL ACCESSORIES:
❏ Custom on-site installation
❏ Custom software file format conversions
Specifications, Details and Dimensions on Reverse Side.
FOOD EQUIPMENT
701 S Ridge Avenue, Troy, OH 45374 • 1-800-960-1190
Printed On Recycled Paper
Data GateWeigh™
F-39714 (1198) LITHO IN U.S.A. (H-01)
SCALE REQUIREMENTS:
■ All Hobart Networkable serial scales
• Quantum, Ultima, SP Series, 5000TE, 5000T, 1865,
1871, 1870, 1860 (Communication kits required for all
scales except on Quantum/Ultima).
■ Hobart TCP/IP scales
• Available for Quantum & Ultima Expansion kit available
for existing scales to protect your investment.
■ Other than Hobart
• Please call your local Hobart Office for more details.
NETWORK REQUIREMENTS:
■ Serial communications
• Wiring - Belden 8761 to all Hobart scales
• NIB - Network interface box. Converts RS-232 serial
line to RS-485 for the scale network.
• Interface Cable - serial port to NIB communications
cable, 9 or 25 pin
■ TCP/IP communications
• Quantum or Ultima with TCP/IP kit
• Industry standard 10BaseT concentrator hubs
• Category 5 wiring recommended
• Ethernet network availability from computer
• Available IP address for each scale on the network
BACKED BY HOBART:
■ 1-800 Telephone Support
■ Internet e-mail Support
■ Worldwide Sales and Service
■ Protected with comprehensive Hobart warranty and
service
■ 1,700 service technicians in 200 offices nationwide
■ Sales and service branches in 80 countries
■ Hobart sales representatives are ServSafe™ certified
As continued product improvement is a policy of Hobart, specifications are
subject to change without notice.
-
1
-
2
