EZ Slide Cabinet Hardware 004 Installation guide

To install EZ Slide Cabinet Hardware, (Plastic Cupboard Hugger)

1. Place inside edge of handle over back edge of cabinet door or drawer.

2. Place other hand on the handle, and gently but firmly slide handle down, allowing the

handle to spread over the cabinet edge.

You may need to try flexing open the handle a couple times before installing it.

www.YouTube.com/EZSlide1

EZ Slide Cabinet Hardware – Cupboard Hugger Pull – No Drilling needed

Made with recycled plastic

See Installation on https://www.youtube.com/watch?v=Re0NO5pZi1E

Like us on EZ Slide Cabinet Hardware

Thank you!

This manual is also suitable for

Download PDF