Community V2-1500 User guide

Type
User guide
V SERIES — Brackets and Accessories Guide — Page 1
BRACKETS AND ACCESSORIES GUIDE
V SERIES
V SERIES — Brackets and Accessories Guide — Page 2
NOTICE
The brackets and accessories described in this guide are for illustrative
purposes only. Please refer to the product owner’s manual or instruction
guide for complete information. The latest product information is
available on Community’s website: www.communitypro.com.
CAUTION
Installation of loudspeakers should only be performed by trained and
qualified personnel. It is strongly recommended that a licensed and
certified professional structural engineer approve the mounting design.
WAIVER OF LIABILITY
Whenever Community Light and Sound, Inc. (CLS), dba Community
Professional Loudspeakers is requested to provide advice or material
regarding the design or installation of its equipment such advice or
material is intended and provided for information purposes only. The
advice or material is only intended to familiarize the user with various
options for design, coverage and installation. User expressly agrees
that CLS shall not be liable for any damages, whether in tort, contract,
strict liability or otherwise consequential, incidental or otherwise to
person or property as a result, directly or indirectly, of the use of any
advice or material. The user of any advice or material provided by CLS
assumes all risk and liability for the use thereof. Without limitation to
the above, CLS does not accept liability or responsibility for the
performance of any manufacturer, design, method, use, material or
technique employed by the acoustic designer and/or installation
company. All advice, information or material is subject to field
variations and environmental conditions. All advice, information, or
material given is oered on the assumption that common or standard
practices for installation used in the construction trades is applied to all
phases of the user’s project. Actual assembly or configuration must be
performed only by persons with knowledge of mechanical trades and
rigging, where applicable. Any installation method must be certified by a
Professional Engineer licensed in the state in which assembly or
configuration is located.
V SERIES — Brackets and Accessories Guide — Page 3
Yoke Mounting Brackets
Page 4
Vertical Yokes
Page 6
Tilting Bracket
Page 8
Versatilt Bracket
Page 9
Vertical Flying Kit
Page 10
Ceiling Mount Kit
Page 11
Handle & Stand Socket
Page 12
Eyebolt Kits
Page 14
TABLE OF CONTENTS
V SERIES — Brackets and Accessories Guide — Page 4
YOKE MOUNTING BRACKETS
Model VB-Y12, VB-Y15, VB-Y32, VB-Y35
 U-shaped yoke mounting brackets with optional 10° and 20°
standos
 Allow direct horizontal and vertical (0°) mounting to a wall or
ceiling, as well as a 10° or 20° downward or upward vertical tilt
 Also used in conjunction with other V SERIES mounting
accessories
 Yoke Mounting Bracket is included with compact models V2-6,
V2-8, V2-26 and V2-28
 Yoke Mounting Bracket is sold separately for large models V2-12,
V2-15, V2-32 and V2-35
 Available in black or white finishes
V SERIES — Brackets and Accessories Guide — Page 5
Part No Description
VB-Y12 V2-12 Yoke Mounting Bracket, Black
VB-Y12W V2-12 Yoke Mounting Bracket, White
VB-Y15 V2-15 Yoke Mounting Bracket, Black
VB-Y15W V2-15 Yoke Mounting Bracket, White
VB-Y32 V2-32 Yoke Mounting Bracket, Black
VB-Y32W V2-32 Yoke Mounting Bracket, White
VB-Y35 V2-35 Yoke Mounting Bracket, Black
VB-Y35W V2-35 Yoke Mounting Bracket, White
Note: Yoke mounting brackets are included with compact V SERIES models
V2-6, V2-8, V2-26 and V2-28
Optional standos are included with V SERIES Yoke Mounting Brackets to
achieve a 10° or 20° downward or upward vertical tilt if desired.
20°
10°
V SERIES — Brackets and Accessories Guide — Page 6
VERTICAL YOKES
Model VB-VY6, VB-VY8, VB-VY26, VB-VY28,
VB-VY12, VB-VY15, VB-VY32, VB-VY35
 Vertical mounting yoke kit allows for precise vertical aiming of a
single full-range V SERIES loudspeaker
 Dedicated vertical yoke is available for each V SERIES full-range
loudspeaker model size
 Allows for precise installation from an overhead yoke of a single
full-range V SERIES loudspeaker with up to 90° of vertical
downtilt
 Two axes of motion—horizontal rotation and vertical tilt—if
installed using a center attachment bolt
 Yoke bracket has a single mounting hole with an aiming angle
guide printed directly onto the bracket for fast and convenient
location of specific aiming angles
 Available in black or white finishes
Vertical Yoke kits for large V SERIES
loudspeaker models V2-12, V2-15,
V2-32 and V2-35 include left and
right bottom yoke brackets.
V SERIES — Brackets and Accessories Guide — Page 7
Part No Description
VB-VY6B V2-6 Vertical Yoke, Black
VB-VY6W V2-6 Vertical Yoke, White
VB-VY8B V2-8 Vertical Yoke, Black
VB-VY8W V2-8 Vertical Yoke, White
VB-VY26B V2-26 Vertical Yoke, Black
VB-VY26W V2-26 Vertical Yoke, White
VB-VY28B V2-28 Vertical Yoke, Black
VB-VY28W V2-28 Vertical Yoke, White
VB-VY12B V2-12 Vertical Yoke, Black
VB-VY12W V2-12 Vertical Yoke, White
VB-VY15B V2-15 Vertical Yoke, Black
VB-VY15W V2-15 Vertical Yoke, White
VB-VY32B V2-32 Vertical Yoke, Black
VB-VY32W V2-32 Vertical Yoke, White
VB-VY35B V2-35 Vertical Yoke, Black
VB-VY35W V2-35 Vertical Yoke, White
Vertical Yoke kits for compact V SERIES
loudspeaker models V2-6, V2-8,
V2-26 and V2-28 include a single
bottom U-bracket.
V SERIES — Brackets and Accessories Guide — Page 8
TILTING BRACKET
Model VB-TILT
 A two-part rotational device that fastens to a V SERIES Yoke
Mounting Bracket to permit angling one loudspeaker in relation to
another
 Allows precise angling of an enclosure
 Use with any full-range V SERIES loudspeaker
 Yoke Mounting Bracket is included with compact models V2-6, V2-8,
V2-26 and V2-28
 Yoke Mounting Bracket is sold separately for large models V2-12,
V2-15, V2-32 and V2-35 (see page 5)
 Available in black or white finishes
Part No Description
VB-TILT Tilting Bracket, Black
VB-TILTW Tilting Bracket, White
V SERIES — Brackets and Accessories Guide — Page 9
 Allows precise installation of a single V SERIES full-range
loudspeaker from the ceiling
 Includes a rotational device, a hang bracket that fastens to the top
or bottom of the loudspeaker enclosure, a ceiling mount bracket,
and an M10 eyebolt
 Use with large V SERIES models V2-12, V2-15, V2-32 and V2-35
 Available in black or white finishes
VERSATILT BRACKET
Model VB-VST
Part No Description
VB-VST Versatilt Bracket, Black
VB-VSTW Versatilt Bracket, White
V SERIES — Brackets and Accessories Guide — Page 10
 Allows two same-size enclosures to be flown at 45 and 60 degree
splay angles for a horizontally aligned array, providing two steel
points for suspension
 Each kit includes the front spacer, the rear spacer, four eyebolts, and
the hardware for attaching the brackets to the V SERIES enclosures
 When a steep down-tilt (greater than 10 degrees) is required, use an
additional Vertical Flying Kit (VFKIT) to fasten to the bottom of the
array for appropriate distribution of forces on the cabinets and their
suspension points
 Available in black or white finishes
VERTICAL FLYING KIT
Model VFKIT
Part No Description
VFKIT Vertical Flying Kit, Black
VFKITW Vertical Flying Kit, White
V SERIES — Brackets and Accessories Guide — Page 11
 Use to create a hang point from a ceiling surface
 Each kit includes a ceiling mount bracket and a bolt that fastens to a
V SERIES Yoke Mounting Bracket or other optional loudspeaker
brackets
 Yoke Mounting Bracket is included with compact models V2-6, V2-8,
V2-26 and V2-28
 Yoke Mounting Bracket is sold separately for large models V2-12,
V2-15, V2-32 and V2-35 (see page 5)
 Use with any full-range V SERIES loudspeaker
 Available in black or white finishes
CEILING MOUNT KIT
Model CMKIT
Part No Description
CMKIT Ceiling Mount Kit, Black
CMKITW Ceiling Mount Kit, White
V SERIES — Brackets and Accessories Guide — Page 12
 Handle and stand socket accessory for compact V SERIES models
V2-6, V2-8, V2-26 and V2-28
 Attaches to the loudspeaker’s rear OmniMount bolt pattern (V2-6,
V2-8 and V2-26) or rear M6 hang points (V2-28) to create a stand
socket mount and convenient carrying handle
 Zinc plated, powder coated steel, black finish
 Perfect for A/V professionals
V SERIES HANDLE & STAND SOCKET
Model V-HSS
Part No Description
V-HSS V SERIES Handle & Stand Socket Accessory
V SERIES — Brackets and Accessories Guide — Page 13
When mounting V SERIES loudspeakers on a speaker stand using the
V-HSS accessory, the loudspeaker enclosure must be positioned directly
above one of the stand’s tripod legs for maximum support. Failure to
follow these instructions may cause the assembly to fall, resulting in
possible harm, injury or death.
Top View
Side View
V SERIES — Brackets and Accessories Guide — Page 14
EYEBOLT KIT
Model M10EYBLTKIT, M6EYBLTKIT
 Eyebolt kits for suspending and rigging V SERIES loudspeakers
 Use the 6mm M6EYBLTKIT with compact V SERIES models V2-6, V2-8,
V2-26 and V2-28
 Use the 10mm M10EYBLTKIT with large V SERIES models V2-12, V2-15,
V2-32 and V2-35
 Each kit contains four (4) eyebolts, black zinc plated
Part No Description
M10EYBLTKIT 10mm eyebolt kit (4) for V2-12/15/32/35
M6EYBLTKIT 6mm eyebolt kit (4) for V2-6/8/26/28
V SERIES — Brackets and Accessories Guide — Page 15
- NOTES -
V SERIES — Brackets and Accessories Guide — Page 16
Community Professional Loudspeakers
333 East Fifth Street, Chester, PA 19013-4511 USA
Phone (610) 876-3400 · Fax (610) 874-0190
www.communitypro.com
© 2016 Community Professional Loudspeakers
12SEP2016
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Community V2-1500 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI