2. Emerson
  3. F61-2510
F61-2510

Emerson F61-2510, White-Rodgers F61 Series Adaptor Plate User manual

  • Hello! I am an AI chatbot trained to assist you with the Emerson F61-2510 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PART NO. 37-6408A
0223
PRECAUTIONS
DESCRIPTION
This adaptor plate assembly is designed for mounting a
Comfort-Set 70 series thermostat to the wall or to a
junction box. The wall cover plate covers the junction box,
wall damage, or old thermostat markings. The adaptor
plate is designed to allow horizontal thermostat mounting,
regardless of junction box orientation.
All kits may not have adaptor plate or all screws shown.
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
CONTENTS
Description ........................................................ 1
Precautions ....................................................... 1
Installation ......................................................... 2
INSTALLATION INSTRUCTIONS
Operator: Save these instructions for future use!
F61 Series
Adaptor Plate Assembly
To prevent electrical shock and/or equip-
ment damage, disconnect electrical power
at main fuse or circuit breaker until installa-
tion is complete.
This instruction sheet is not intended as a wiring guide.
Refer to the thermostat installation instructions to ensure
proper wiring.
NOTE
CAUTION
!
Adaptor Plate
No. 6 X
5
/
16
” Phillips
pan-head screw (2)
6-32 X
3
/
4
” flat-head
machine screw (4)
F61-2510
Wall Plate
Printed in U.S.A.
White-Rodgers is a division
of Emerson Electric Co.
www.white-rodgers.com
2
6-32 X
3
/
4
” flat-head
machine screws
6-32 X
3
/
4
” flat-head
machine screws
No. 6 X
5
/
16
” Phillips
pan-head screw (2)
1F7X
Thermostat
Subbase
F61-2510
Wall Plate
Adaptor Plate
Junction Box
Locate and drill two
clearance holes in wall
6-32 X
3
/
4
” flat-head
machine screws
No. 6 X
5
/
16
” Phillips
pan-head screw (2)
Junction Box
F61-2510
Wall Plate
Subbase
1F7X
Thermostat
INSTALLATION
FOR 1F7X DIGITAL THERMOSTATS
Figure 1. Mounting 1F7X digital thermostat to horizontal junction box.
Figure 2. Mounting 1F7X digital thermostat to vertical junction box.
3
No. 6 X
5
/
16
” Phillips
pan-head screw (2)
F61-2510
Wall Plate
Subbase
1F7X
Thermostat
No. 6 X 1” pan-head screws
(supplied with thermostat)
Wall
NOTE
When installing wall cover plate and thermostat directly to
wall, use the pointed screws supplied with the thermostat.
Figure 3. Mounting 1F7X digital thermostat to wall.
For additional product information, please visit www.white-rodgers.com
The Emerson Logo is a
trademark and a service mark
of Emerson Electric Co.
/