Samsung DVD VCR Combo CHT-500 User manual

Brand: Samsung

Model: DVD VCR Combo CHT-500

Category: DVD players

Type: User manual

This manual is also suitable for

CHT-500

DVD-VCR

CHT-500

PAL SECAM

www.samsungvcr.com

REC S.MODE

STANDBY/ON

PHONES

COPY PROG

SELECT

VOL

P.SCAN

Instruction Manual

Contents

◆ FOREWORD

■ Safety Instructions ................................................................................................................. 5

■ Disc Type and Characteristics................................................................................................ 6

◆ DVD-VCR OVERVIEWS

■ Front View of the DVD-VCR .................................................................................................. 7

■ Rear View of the DVD-VCR .................................................................................................. 7

■ Infrared Remote Control ........................................................................................................8

■ Display Indicators .................................................................................................................. 9

■ Accessories ........................................................................................................................... 9

◆ CONNECTING

YOUR DVD-VCR

■ Deciding How to Connect DVD-VCR .................................................................................... 10

■ Connecting DVD-VCR to the TV using the Coaxial Cable .................................................... 11

■ Connecting DVD-VCR to the TV using the SCART Cable .................................................... 11

■ Connecting DVD-VCR to a Satellite Receiver or Other Equipment ....................................... 12

■ Plug & Auto Set up ................................................................................................................ 13

■ Tuning Your Television for the DVD-VCR ............................................................................. 14

■ Deck Control Keys.................................................................................................................. 15

■ Basic TV Tuner Operations ................................................................................................... 16

■ Inserting Batteries in the Remote Control .............................................................................. 16

■ Copying from DVD to VCR..................................................................................................... 17

■ Setting the Date and Time...................................................................................................... 18

■ Setting the Menu Language................................................................................................... 18

◆ SETTING

UP YOUR DVD-VCR

■ Presetting the Stations Automatically .................................................................................... 19

■ Presetting the Stations Manually ........................................................................................... 20

■ Clearing a Preset Station .......................................................................................................21

■ Changing the Preset Station Table ....................................................................................... 22

■

Selecting the RF OUT Sound Mode (G-K)

................................................................................... 23

■ Setting the DVD-VCR Output Channel................................................................................... 23

■ Selecting the Colour Mode .................................................................................................... 24

■ NICAM ................................................................................................................................... 24

■ Intelligent Picture Control ...................................................................................................... 25

■ ShowView Extend ................................................................................................................. 26

■ Auto Power off........................................................................................................................ 26

■ Screen Messages................................................................................................................... 27

■ Selecting the Cassette Type .................................................................................................. 27

■ Repeat Play............................................................................................................................ 28

■ S-VHS Play ............................................................................................................................ 28

◆ RECORDING TELEVISION BROADCASTS

■ Selecting the Recording Speed.............................................................................................. 29

■ Protecting a Recorded Cassette ............................................................................................ 30

Contents

■ Recording a Programme Immediately.................................................................................... 30

■ Recording a Programme with Automatic Stop ....................................................................... 31

■ Using the ShowView .............................................................................................................32

■ Modifying ShowView Programming........................................................................................ 33

■ Using the Timer Programming Feature.................................................................................. 34

■ Checking a Preset Recording................................................................................................. 35

■ Cancelling a Preset Recording............................................................................................... 35

◆ PLAYING BACK

■ Playing a Cassette ................................................................................................................. 36

■ Adjusting Picture Alignment Manually.................................................................................... 36

■ Selecting the Audio Output Mode........................................................................................... 37

■ Playing a Cassette in Slow Motion ........................................................................................ 37

■ Playing a Sequence at Variable Speeds................................................................................ 38

■ Searching for a Specific Sequence ........................................................................................ 39

■ Using the Tape Counter ......................................................................................................... 41

■ Connecting an RCA Audio/Video Input Cable........................................................................ 42

■ Recording from Another VCR or Camcorder.......................................................................... 43

■ Audio Dubbing a Pre-recorded Cassette................................................................................ 44

■ Using the TV Buttons on the Remote Control ........................................................................ 45

◆ DVD FUNCTIONS

■

Choosing a Connection

.............................................................................................................. 46

■

Setting Up the Language Features

.............................................................................................. 47

■

Setting Up the Audio Options

...................................................................................................... 49

■

Setting Up the Parental Control

................................................................................................... 50

■

Setting Up the Display Options

................................................................................................... 51

■

S-Video Connections (for DVD)

.................................................................................................. 51

■

Component Connections (for DVD)

............................................................................................. 52

■

Special Playback Features

......................................................................................................... 53

■

Adjusting the Aspect Ratio (EZ View)

.......................................................................................... 54

■

Using the Display Function (DVD/VCD/CD)

.................................................................................. 56

■

Changing the Camera Angle

....................................................................................................... 57

■

Selecting the Subtitle Language

.................................................................................................. 57

■

Repeat Play

.............................................................................................................................. 58

■

Using the Zoom (DVD/VCD)

....................................................................................................... 58

■

Repeat Chapter/Title

.................................................................................................................. 59

■

Selecting the Audio Language

.................................................................................................... 59

■

Using the Mark Function (DVD/VCD)

........................................................................................... 60

■

MP3-CD Playback

..................................................................................................................... 61

■

WMA Play

................................................................................................................................62

■ MP3/

WMA Play

....................................................................................................................... 63

■

Program Play & Random Play

.................................................................................................... 64

■

Picture CD Playback

.................................................................................................................. 65

Contents (cont.)

Symbols

1 1

☛

➢

Press/push

Hold down

= Step number

Important Note

This manuel is divided into two sections:

one describing the VCR; the other, the DVD.

Prior to undertaking anything, please verify in which section you actually are by

checking either the or symbols or the header of the chapter.

DVDVCR

This product incorporates copyright protection technology that is protected by

method claims of certain U.S. patents and other intellectual property rights owned

by Macrovision Corporation and other rights owners. Use of this copyright

protection technology must by authorized by Macrovision Corporized by

Macrovision Corporation, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

◆ APPENDIX A - ADVANCED CONNECTIONS

■

Setting the Delay Time

............................................................................................................... 67

■

About Speaker Setup

................................................................................................................ 68

■

Sound Mode Function

................................................................................................................ 70

■

Listening to the Radio

................................................................................................................ 71

■

Presetting Stations

.................................................................................................................... 72

◆ SOLVING PROBLEMS

■

Technical Specifications

............................................................................................................. 73

■

Problems and Solutions (VCR)

................................................................................................... 74

■

Troubleshooting Guide (DVD)

..................................................................................................... 75

Safety Instructions

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

5°C

40°C

10% 75%

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

Do NOT expose the DVD-VCR

to extreme temperature condi-

tions (below 5°C and above

40°C) or to extreme humidity

conditions (less than 10% and

more than 75%).

Do NOT expose the DVD-VCR

to direct sunlight.

Do NOT expose the DVD-VCR

to any liquids.

Do NOT place any objects on

the DVD-VCR or remote

control.

During a storm and/or light-

ning, unplug the DVD-VCR

from the mains socket and

aerial.

If the remote control is not

used for a long period of time,

remove the batteries and store

it in a cool, dry place.

The following illustrations represent precautions.

Disc Type and Characteristics

DIGITAL

SOUND

STEREO

• Playback

Region

Number

• PAL colour

system in U.K,

France, Germany,

etc.

• Dolby

Digital disc

• Digital

Audio disc

• Stereo

disc

• DTS disc

Disc Markings

Both the DVD player and the discs are coded by region. These regional codes must match in order for the

disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

Playback Region Number

PAL

• NTSC broadcast

system in USA,

Canada, japan,

South Korea, etc.

NTSC

This DVD player is capable of playing the following types of discs with the corresponding logos :

12 Cm

8 Cm

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

Audio

Video

Audio

Video

Audio

• DVD contains excellent sound

and video due to Dolby Digital

and MPEG-2 system.

• Various screen and audio

functions can be easily selected

through the on-screen menu.

• Video with CD sound, VHS

quality & MPEG-1 compression

technology.

• An LP is recorded as an analog

signal with more distortion. CD

is recorded as a Digital Signal

with better audio quality, less

distortion and less deterioration

of audio quality over time.

VIDEO-CD

AUDIO-CD

12 Cm

8 Cm

74 min.

20 min.

12 Cm

8 Cm

74 min.

20 min.

Disc Types

(Logos)

Recording

Types

Disc Size

Max.

Playing

Time

Characteristics

DVD

* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!

(CDGs play audio only, not graphics.)

* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the

recording.

• ”DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

• Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

WMA

• WMA disc

Front View of the DVD-VCR

Rear View of the DVD-VCR

1 DVD DECK

2 DVD OPEN/CLOSE

3 VCR DECK

4 VCR EJECT

5 STANDBY/ON

6 HEADPHONE JACK

7 STOP

8 REW/SKIP BACK BUTTON

9 PLAY/STILL

10 F.F/SKIP NEXT BUTTON

11 RECORD

12 SOUND MODE

13 COPY

14 FRONT PANEL DISPLAY

15 PROGRAMME /

16 PROGRESSIVE SCAN

17 SELECT DIAL

18 VOLUME DIAL

EJECT

REC S.MODE

STANDBY/ON

PHONES

COPY PROG

SELECT

VOL

P.SCAN

123 4

5 6 7 8 9 10 11 12 13 14 15 16 17 18

RADIO ANT.

COAXIAL

SPEAKERS

FRONT R FRONT L WOOFER

SURROUND R SURROUND L CENTER

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

DVD Only

COMPONENT VIDEO OUT

S-VIDEO OUT

1 RF ANTENNA INPUT

2 RADIO FM ANTENNA INPUT

3 AUX AUDIO L, R IN/OUT SOCKETS

4 AV2 (DEC./EXT.) SCART (EURO-21) SOCKET

5 COOLING FAN

6 COMPONENT VIDEO OUT

7 5.1CH SPEAKER OUT

8 RF OUT TO TV

9 RADIO AM ANTENNA INPUT

10 VIDEO IN/OUT SOCKETS

11 AV1 (EURO AV) IN/OUT SCART (EURO-21)

SOCKET

12 S-VIDEO OUT

1 2 3 4 5 6 7

8 9 10 11 12

Infrared Remote Control

1 STANDBY/ON

2 SHUTTLE

<< / >>

3 ANGLE/IPC

4 DVD SELECT

5 VCR SELECT

6 TV VOLUME

7 OPEN/CLOSE, EJECT

8 EZ VIEW

9 REWIND, SKIP BACK

10 STOP

11 DISC MENU

12 MENU

13 LEFT

14 RECORD

15 TEST

16 SPEAKER

17 TV/VCR

18 MODE, REPEAT

19 TITLE, SPEED

20 TV STANDBY/ON

21 0-9

22 ZOOM, INPUT SELECT

23 TV SELECT

24 FM/AM SELECT

25 AMP VOLUME

26 PROG/TRK ( , )

27 AUDIO

28 MUTE

29 FAST-FORWARD, SKIP NEXT

30 PLAY/STILL

31 CLEAR

32 RETURN, A.DUB

33 UP

34 OK

35 RIGHT

36 DOWN

37 INFO.

38 BASS

39 SOUND MODE

40 TREBLE

41 MARK, SEARCH

42 SUBTITLE, TIMER

Display Indicators

Accessories

1 2 3 4 5 6

7 8 9 10

1 The DVD Deck is active.

2 DVD or CD media is loaded.

3 The time, counter position, time remaining or current

deck status is indicated.

4 Recording is in progress (normal and timer).

5 VHS videotape is loaded.

6 The VCR Deck is active.

7 A DVD with a DTS soundtrack is loaded.

8 The Hi-Fi track of a VHS videotape is playing or

the current TV program or video is broadcast in

Stereo.

9 Timer Recording is in progress. When it blinks

an error has occurred.

10 COPY mode indicator

You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).

Together with your DVD-VCR, you will find the following accessories in the box.

REMOTE CONTROL

AUDIO & VIDEO CABLE

OWNER’S INSTRUCTIONS

COAXIAL CABLE

BATTERIES

AM ANTENNA CABLE

FM ANTENNA CABLE

Deciding How to Connect DVD-VCR

You must take into account various factors when connecting audio or video systems:

◆ Types of connectors available on your systems

◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or

temporarily (camcorder for example)

Your DVD-VCR is equipped with the following connectors.

Connector Location Type Direction Recommended Use

AV1 (EURO AV)

Rear SCART In/Out ◆ Television

◆ Satellite receiver

◆ Other VCR

AV2 IN Rear SCART In ◆ Satellite receiver

◆ Other VCR

Audio output Rear Audio RCA Out ◆ Audio out

AUX Rear Aux In ◆ Audio in

Audio/Video Video in

VIDEO output Rear RCA Out ◆ Video out

S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only)

output

OUT TO TV Rear 75 Ω Out ◆ Television

coaxial

IN FROM ANT. Rear 75 Ω In ◆ Aerial

coaxial ◆ Cable television network

◆ Satellite receiver

FM/AM Antenna Rear 75 Ω In ◆

FM Antenna

Input coaxial

◆

AM Antenna

☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements

are switched off

Refer to the documentation supplied with your equipment for detailed connection instructions

and associated safety precautions.

OUT

S-VIDEO OUT

RADIO ANT.

COAXIAL

Connecting DVD-VCR to the TV using the Coaxial Cable

Connecting DVD-VCR to the TV using the SCART Cable

To receive television programmes a signal must be received from

one of the following sources:

◆ An outdoor aerial

◆ An indoor aerial

◆ A cable television network

◆ A satellite receiver

☛ Make sure that both the television and the DVD-VCR

are switched off before connecting the cables.

1 Remove the aerial or network input cable from the television.

2 Connect this cable to the 75Ω coaxial socket marked on

the rear of your DVD-VCR.

3 Plug the coaxial cable supplied into the socket on your

DVD-VCR.

4 Plug the other end of the coaxial cable into the connector

previously used for the aerial on the television.

5 To obtain better pictures and sound quality on your television,

you can also connect your DVD-VCR to the television via the

SCART cable (see section below) if your television is equipped

with this type of connection.

You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is

available on the television. You thus:

◆ Obtain better quality sound and pictures

◆ Simplify the setting up procedure of your DVD-VCR

☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable

supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched off

before connecting the cables.

1 Connect the coaxial cable as indicated in the above section.

2 Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.

3 Plug the other end into the appropriate connector on the television.

RADIO ANT.

COAXIAL

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

RADIO ANT.

COAXIAL

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

RADIO ANT.

COAXIAL

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

Aerial

SCART Cable

RF coaxial cable

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

1. AV2 IN: By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of

the DVD-VCR.

After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the

DVD-VCR, e.g. re-adjust to channel 39.

1. AV1(EURO AV): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of

the DVD-VCR.

After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the

DVD-VCR, e.g. re-adjust to channel 39.

You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the

appropriate outputs are available on the equipment chosen. The following illustrations give a few

examples of the connection possibilities.

Satellite Receiver or other Equipment

Aerial

Aerial Connector

RADIO ANT.

COAXIAL

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

SCART Cable

RF coaxial cable

Satellite Receiver or other Equipment

Aerial

Aerial Connector

RADIO ANT.

COAXIAL

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

SCART Cable

RF coaxial cable

Plug & Auto Set up

Your DVD-VCR will automatically set itself up when it is plugged

into the mains for the first time. TV stations will be stored in

memory. The process takes a few minutes. Your DVD-VCR will

then be ready for use.

1 Connect the coaxial cable as indicated on page 11.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains.

Result: The Language Set menu is displayed.

3 Select the required language by pressing the

❷

buttons.

4 Press OK to store the language selected.

Result

: A message appears.

5 Press OK to start the auto scanning.

◆ The number of stations automatically stored by the VCR

depends on the number of stations that it has found.

6 The current time and date are displayed automatically.

Check the date and time.

if it is :

◆

Correct, Press RETURN button twice to exit the menu.

◆

incorrect, see page 18.

➢ Auto preset can be performed by pressing

■

(STOP) on

the VCR continuously for 5 seconds or more with no

tape inserted.

RADIO ANT.

COAXIAL

AUX

IN OUT

AUDIO

VIDEO

DVD & VCR

Auto setup

Please wait

00 %

Time Date Year

Clock Set

12 : 00 1 / JAN / 2004 THU

Auto Clock : On

Tuning Your Television for the DVD-VCR

You must tune your television for the DVD-VCR only if you are

not

using a Scart cable

➢ To view pictures from your DVD-VCR when a Scart

cable is used, the television must be set to the

audio/video mode (AV).

1 Switch on the television.

2 Switch on the DVD-VCR by pressing STANDBY/ON on the front

of the DVD-VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television to be reserved for

use with your DVD-VCR.

4 Insert the video cassette in the DVD-VCR. Check that the

DVD-VCR starts reading the cassette; if not, press

❿

button

5 Start a scan on your television or set the television to UHF

channel 36.

6 Fine tune the television until the pictures and sound are obtained

clearly.

7 If you cannot find the pictures and sound, or there is interference

from nearby channels, it may be necessary to change the setting

of the DVD-VCR output channel (see Setting the DVD-VCR

Output Channel on page 23 and Problems and Solutions on

page 74).

8 When the picture and sound are perfectly clear, store this

channel at the desired programme position on the television.

Result

: That programme is now reserved for use with your

DVD-VCR.

Deck Control Keys

The DVD-VCR uses one set of controls to operate both decks.

The following keys are helpful in successfully controlling each

deck.

STANDBY/ON Button

Press the STANDBY/ON button on the remote control or front

panel to turn on the DVD-VCR.

2 DVD Button

Press the DVD button on the remote control when you want to

control the DVD deck.

◆ The DVD indicator will light on the Front Panel Display to

show that the DVD deck is selected.

3 VCR Button

Press the VCR button on remote control when you want to

control the VCR deck.

◆ The VCR indicator will light on the Front Panel Display to

show that VHS deck is selected.

INPUT SEL. BUTTON

Press the INPUT SEL. button repeatedly to cycle through all of

your input sources, including the Tuner (PR##), AV1 (rear AV

input), AV2 (rear AV input), AUX (rear AV input).

• It is only available when VCR deck is selected.

➢ Before using the VCR operation of 19~45 pages, press

the VCR button on the remote control to select VCR

mode.

Before using the DVD operation of 46~66 pages, press

the DVD button on the remote control to select and

watch DVD.

STANDBY/ON

PHONES

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control

when you:

◆ Purchase the DVD-VCR

◆ Find that the remote control is no longer working

correctly

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2 Insert two AAA, RO3 or equivalent batteries, taking care to

respect the polarities:

◆ + on the battery with + on the remote control

◆ – on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

➢ Do not mix different battery types (manganese and

alkaline for example).

Basic TV Tuner Operations

The following buttons are used when watching television via the

DVD-VCR’s built-in TV tuner.

1 TV/VCR Button

Press to switch between your TV’s tuner and the VCR’s internal

tuner.

PROG Button

Press to change to the next or previous channel.

3 0-9 Buttons

Press to select channels directly.

4 INFO.

Press to display the channel you are watching.

◆ Also works in DVD and VCR mode.

Copying from DVD to VCR

The DVD-VCR allows you to copy the contents of a DVD to a

VHS tape with a press of the COPY button.

If the DVD you are attempting to copy is copy

protected, you will not be able to copy the disc. It is not

permitted to copy Macrovision® encoded DVDs.

1 INSERT DISC

Insert the disc you wish to copy in the DVD deck and close the

drawer.

2 Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3 Copy the DVD to VHS Tape

Press the COPY button on the DVD-VCR front panel.

◆ The DVD will go into Play mode and the VCR will go into

Record mode.

4 Stop the Copy Process

When the DVD is finished playing, press the VCR button on the

remote control and then press the STOP button to end the copy.

◆ You must stop the Copy process manually when the DVD

movie ends or the DVD may replay and record over and over

again.

☛ The NTSC DVD or VCD Copy process can not active.

EJECT

REC S.MODE

STANDBY/ON

PHONES

COPY PROG

SELECT

VOL

P.SCAN

EJECT

REC S.MODE

STANDBY/ON

PHONES

COPY PROG

SELECT

VOL

P.SCAN

REC S.MODE

PHONES

COPY

Setting the Menu Language

1 Open “MENU”

After pressing the MENU, press the OK or

❿ .

2 Select “Language”

Use the

❷

buttons to highlight

“Language,” then press the OK or

❿ .

3 Set menu Language

Place the selection arrow next to your desired Language, then

press the OK button.

4 On completion, press RETURN twice to exit the menu.

Language : English

User Set

Auto Power Off : Off

Screen Messages : On

Install

Français

Deutsch

Español

Italiano

Nederlands

Language Set

English

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆ Automatically stop programme recording

◆ Preset your DVD-VCR to record a programme

automatically

You must set the date and time when:

◆ You purchase the DVD-VCR

☛

◆ Do not forget to reset the time when you change

clocks from winter to summer time and vice versa.

1 After pressing the MENU, press the OK or

❿ .

Result: The Setup menu is displayed.

2 Press the corresponding

❷

buttons to select the Clock option.

3 Press the OK or

❿

to select this option.

Result

: The Clock Set menu is displayed.

4 Press

➛

❿

to select the hour, minutes, day, month and year.

Result

: The option selected highlight.

5 Press the

❷

buttons to increase or decrease the value.

Result

: The day of the week is displayed automatically.

➢ You can hold the

❷

buttons down to scroll more

quickly through the values.

6 On completion, press RETURN three times to exit the menu.

Language : English

User Set

Auto Power Off : Off

Screen Messages : On

Install

Time Date Year

Clock Set

12 : 00 1 / JAN / 2004 THU

Auto Clock : On

Presetting the Stations Automatically

☛

You do not need to preset the stations if you have already

set them automatically (see Plug & Auto Set Up on page 13).

Your DVD-VCR contains a built-in tuner used to receive television

broadcasts.

You must preset the stations received through the tuner.

This can be done:

◆ Plug & Auto Set up (see page 13)

◆ Automatically

◆ Manually (see page 20)

You can store up to 80 stations.

1 After pressing the MENU, press the OK or

❿ .

Result: The Setup menu is displayed.

2 Press the corresponding

❷

buttons to select the Install

option.

3 Press the OK or

❿

to select this option.

Result

: The Install menu is displayed.

4 Press the corresponding

❷

buttons, until the Auto Setup

is selected.

And then press the OK or

❿

to select this option.

Result

: A message appears, indicating that any channels

already preset on your VCR will be deleted.

5 Press OK to start the auto scanning.

Result

: ◆ The Please Wait indication highlight on the

television screen.

◆ The first frequency band is scanned and the first

station found is displayed and stored.

◆ The DVD-VCR then searches for the second

station and so on.

◆ When the automatic scanning procedure has

finished, the DVD-VCR switches automatically to

programme 1.

➢ The number of stations automatically stored by the DVD-

VCR depends on the number of stations that it has found.

6 If you wish to cancel the auto scanning before the end, press the

MENU button to exit the menu.

➢ ◆ Once the auto scanning procedure has finished,

some stations may have been stored more than once;

select the stations with the best reception and delete

the ones no longer required (see page 21).

Auto Setup

Your data will be lost

Press OK to continue

Menu to exit

Auto Setup

Manual Setup

TV System : G

VCR Output CH : CH 36

Install

Language : English

User Set

Auto Power Off : Off

Screen Messages : On

Install

Auto Setup

Please Wait

15%

VCR

Presetting the Stations Manually

VCR

Language : English

User Set

Auto Power Off : Off

Screen Messages : On

Install

Auto Setup

Manual Setup

Install

TV System : G

VCR Output CH : CH 36

MANUAL TUNING

MEMORY : OK

RETURN

PR :

CH : - - -

MFT : -

DECODER : OFF

NAME : - - - -

TV STATION TABLE

SWAPPING : OK

DELETE : CLEAR RETURN

PR CH NAME DEC

☛ You do not need to preset the stations manually if you

have already set them automatically.

1 After pressing the MENU, press the OK or

❿ .

Result

: The Setup menu is displayed.

2 Press the corresponding

❷

buttons to select the Install

option.

3 Press the OK or

❿

to select this option.

Result

: The Install menu is displayed.

4 Press the corresponding

❷

buttons, until the Manual

Setup option is selected.

5 Press the OK or

❿

to select a Manual Setup option.

Result

: The TV STATION TABLE menu is displayed.

6 Press the

❷

buttons to select a programme number as

required.

7 Press the

❿!

button to preset the station.

Result

: The MANUAL TUNING menu is displayed.

8 Press the

➛

❿

buttons to start scanning channel.

Result

: The frequency band is scanned and the first station

found is displayed.

9 Press the

❷

button, until the DECODER is selected.

10 Press the

❿

button to activate or deactivate use of the decoder

for the TV station, if necessary.

11 Press the

❷

buttons until the NAME is selected.

The station name is set automatically from the broadcast signal.

12 To change the programme’s name, press the

❿!

button.

Result

: The first letter of the name flashes.

13 To... Then...

Select a character Press the

❷

button until the

in the name required character is displayed

(letters, numbers or “-” character).

Move to the next or Press the

➛

❿

buttons

previous character respectively.

14 If you... Then...

Wish to store the ◆ Press the

❷!

buttons until the

station displayed

MFT is selected.

◆ Press the

➛

❿

buttons to adjust the

picture, if necessary.

◆ Press OK to store the station

Do not wish to ◆ Press the

❷

buttons until the CH

displayed store the station is selected.

◆ Press the

➛

❿

buttons to go on

scanning the frequency band and

display the next station

◆ Go back to the beginning of Step 9

15 Repeat this procedure from Step 9 onwards, until all the

required stations have been stored.

16 On completion, press the RETURN button three times to exit the

menu.

Page is loading ...

Samsung DVD VCR Combo CHT-500 User manual

Brand: Samsung

Model: DVD VCR Combo CHT-500

Category: DVD players

Type: User manual

This manual is also suitable for

CHT-500

Download PDF

report

Samsung DVD VCR Combo CHT-500 User manual

This manual is also suitable for

Samsung DVD VCR Combo CHT-500 User manual

Related papers

Other documents