Palsonic CRT Television 5125PF User manual

Palsonic
Brand
Palsonic
Model
CRT Television 5125PF
Category
CRT TVs
Type
User manual

This manual is also suitable for

Palsonic CRT Television 5125PF comes with a full function remote control, allowing you to operate it from a distance. It has an on-screen menu display for easy navigation and adjustment of various settings. You can connect multiple devices to the TV, including DVD players, VCRs, and gaming consoles, thanks to its two groups of Video/Audio input terminals and one group of DVD input terminals. The TV also features an intellectualized I2C-bus control and digital AFT technology for enhanced picture and sound quality.

Palsonic CRT Television 5125PF comes with a full function remote control, allowing you to operate it from a distance. It has an on-screen menu display for easy navigation and adjustment of various settings. You can connect multiple devices to the TV, including DVD players, VCRs, and gaming consoles, thanks to its two groups of Video/Audio input terminals and one group of DVD input terminals. The TV also features an intellectualized I2C-bus control and digital AFT technology for enhanced picture and sound quality.

PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5125PF
OWNER'S MANUAL
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4164
Standards Australia
APP No: N15959
Congratulations on your purchase of this
Palsonic colour television receiver.
We recommend that you thoroughly read this
manual before use to fully enjoy the many
functions and excellent effects of this receiver.
Retain this manual in an easily accessible
location for future reference.
Screen displays and illustrations in this
manual may differ from the actual ones
for better visibility.
Contents
Features ........................................................................................................................
Important Safety Cautions ..........................................................................................
Identification of Controls ............................................................................................
Front view .................................................................................................................
Back view ..................................................................................................................
Remote control .........................................................................................................
Battery installation ...............................................................................................
Effective range of the remote ...............................................................................
Installation ....................................................................................................................
Antenna installation ..................................................................................................
Connect to video and audio equipment ....................................................................
Operations ....................................................................................................................
Menu introduction .....................................................................................................
Power on ..................................................................................................................
Power off ..................................................................................................................
Selecting input signal ................................................................................................
Tuning In ...................................................................................................................
Auto search ..........................................................................................................
Manual search .....................................................................................................
Channel skipping .................................................................................................
Fine tuning ...........................................................................................................
Channel exchange ...............................................................................................
Setting Colour system ..........................................................................................
Setting Sound system ..........................................................................................
Selecting channel .....................................................................................................
Use Digit buttons ..................................................................................................
Use CH+/- buttons ...............................................................................................
Use previous channel button ..........................................................................
Picture controls .........................................................................................................
Sound controls ..........................................................................................................
Use VOL+/- ..........................................................................................................
Use button .......................................................................................................
Clock setting .............................................................................................................
Sleep timer ..........................................................................................................
Clock setting ........................................................................................................
On Timer setting ..................................................................................................
On channel setting ...............................................................................................
Off Timer setting ..................................................................................................
System setting ..........................................................................................................
Blue background ..................................................................................................
OSD Language ....................................................................................................
Calendar ..............................................................................................................
Playing game .......................................................................................................
Menu demonstration ............................................................................................
Troubleshooting Guide ...............................................................................................
Specifications ..............................................................................................................
1
2
4
4
5
6
7
7
8
8
9
10
10
11
11
12
13
13
13
14
14
15
15
15
16
16
16
16
17
18
18
18
19
19
19
19
20
20
21
21
21
21
22
23
24
25
Features
Features
1
Intellectualized I
2
C-bus control
Digital AFT Technology
Four Picture Modes
Two groups of Video/Audio input terminals
One group of DVD input terminals
On-screen menu display
Full function remote control
Hyperband
Channel exchange
On timer/Off timer
Game
Calendar
2
Important Safety Cautions
Safety Cautions
When any unusual situation occurs, turn off the
power supply at once and remove the plug from the
wall outlet. Contact a qualified service department in
your local area.
When cleaning dust off the picture tube disconnect
the power first. You can wipe lightly with a piece of
dry, clean and soft cloth.
Avoid exposing the set to direct sunlight and other
sources of heat to prevent damage to the cabinet
and components.
Do not expose the TV set to rain or excessive
moisture. Avoid using the set in very warm or
damp places and never use it in a bathroom.
High voltage exists in this TV set. Do not remove the
cover.
3
This TV set can operate on a power of ~240V, 50Hz. You must not use a power
supply of any other type.
Don't overload wall outlets; extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
Do not cover the ventilating hole in the cabinet
Keep a space of more than 10cm from the walls to the
TV set to ensure adequate ventilation.
If the power cord or the plug is damaged contact a
qualified service department for service.
When the TV set is to be left unattended for a long
period of time, turn off the power supply and remove
the plug from the wall outlet.
Don't try to push anything into the cabinet or place
any vessel with water on the TV set.
Identification of Controls
Front view/Back view
4
1. Remote sensor.
2. Indicator.
3. Power Switch.
4. VOL+ button: volume up adjust; menu item adjust.
5. VOL- button: volume down adjust; menu item adjust.
6. CH+ button: channel up select; menu item select.
7. CH- button: channel down select; menu item select.
8. MENU button: to enter into menu operation.
9. AV/TV button: video input select.
Front view
AV/TV
MENU
CH-
CH+
VOL-
VOL+
4
5
6
7
8
9
1
2
3
5
1. Antenna input
2. DVD input (Y, C , C , AUDIO: L/MONO, R)
3. AV1 input (VIDEO, AUDIO: L/MONO, R)
4. S-VIDEO input
5. Earphone jack
AV2 input (VIDEO. AUDIO,: L/MONO, R)
Back view
B R
1
2
4 3
Notes:
The S-VIDEO terminal is prior to the VIDEO terminal, if you want to watch
a video program from the VIDEO input terminal, please disconnect the
S-VIDEO first.
S-VIDEO
VIDEO
AUDIO
R
R
L/MONO
L/MONO
Y
C
B
R
C
DVD
AUDIO
(1)
5
VIDEO
L/MONO
R
AUDIO
(2)
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
Identification of Controls (continued)
Remote Control
6
Power on/standby
Direct Channel selector
TV/VIDEO Input selector
Channel up
Volume down
Channel down
Scanning program
Sleep timer Calendar
Playing game
To access MENU operation
Volume up
Previous channel
On-screen display call
Picture mode select
Sound Mute
Install two "AA"
batteries matching
the +/- polarities
of the battery to
the +/- marks.
Replace the battery
cover.
1. There should be no obstacle between the TV
and the transmitter.
2. Use the remote control within the effective range
as the above figure.
3. If the remote control does not work, please check
whether the batteries are exhausted or the
polarity is wrong.
4. When direct sunlight, and incandescent lamp,
fluorescent lamp or any other strong light shines
on the remote sensor of the TV, the remote
operation may be unstable.
Open the battery
cover.
1
Battery Installation Effective range of the Remote Control
2
3
Notes:
1. When the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries.
2. Do not drop or dampen the remote control.
3. Do not disassemble the remote control.
Notes:
7
Installation
Antenna installation/Connect to video and audio equipment
8
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna
must be used. The exact type and position of the antenna will depend upon your particular area.
Turn off the power first, when you connect an outdoor antenna to the antenna input
terminal. When installing an outside antenna system, extreme care should be taken
to keep from touching power lines or circuits as contact with them might be fatal. In
thunder and lighting weather, please disconnect the outdoor antenna to avoid
thunder/lightning strike.
Antenna installation
Notes:
9
Connect video and audio equipment
This TV set provides 2 groups of AV input terminals and 1 group of DVD terminal for your
convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture.
Please refer to the owner's manual of the equipment to be connected as well.
Connect to the side AV input terminals
Connect the rear AV and DVD input terminals.
To earphone jack
VIDEO EQUIPMENT
W
W
Y
Y
R
R
R
L/MONO
VIDEO
Signal
To video
output
To audio
outputs
To audio outputs
WW
WW
WW
WW
YY
YY
RR
RR
RR
RR
S-VIDEO
VIDEO
AUDIO
R
R
L/MONO
L/MONO
Y
C
B
R
C
DVD
Video equipment
without S-video
terminal
Video equipment
with S-video
terminal
DVD
To Y output
To audio (L) output
To audio (R) output
To C output
B
To C output
R
To S-VIDEO
output
WW
WW
YY
RR
R RR
GG
G
BB
B
Yellow (video)
white (audio L)
red (audio R, C )
Green (Y)
Blue (C )
R
B
AUDIO
To audio outputs
To video output
(1)
AUDIO
Press VOL+ button
Press VOL+ button
Menu Introduction
10
Operations
In menu operation, press CH+/- to select item, press
VOL+/- to adjust selected item. Press MENU button
again or wait for several seconds to exit menu.
To adjust the picture's contrast.
To adjust the picture's brightness.
To adjust the picture's colour.
To adjust the picture's sharpness.
To adjust the picture's skin colour.
(This item is
available
only
in
NTSC)
To set blue background.
To set OSD language.
To access calendar.
To play game.
To demonstrate some functions of the TV.
To set the colour system.
To set the sound system.
To search program automatically.
To fine tune manually.
To search program manually, it stops if a certain program is found.
To select the band for current channel.
Current program number.
To exchange programs in current channel and target channel.
To set target channel.
To set channel skip.
To Fine tune automatically.
To set sleep timer.
To set current time.
To set ON timer.
To set OFF timer.
To set ON timer program.
Press MENU button
Press VOL+ buttonPress VOL+ button
ON
ENG
BLUEBACK
LANGUAGE
CALENDAR
GAME
DEMO
S
E
T
U
P
P
R
E
S
E
T
50
50
50
50
50
CONTRAST
BRIGHT
COLOR
SHARPNESS
TINT
30 MIN
--:--AM
--:--AM
--:--AM
3
SLEEP
CLOCK
ON TIME
OFF TIME
CHANNEL
C
L
O
C
K
AUTO
BG
UHF
0
1
ON
ON
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
AFT
P
I
C
T
U
R
E
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Turning Off
Power On/Power Off
Power On/Power Off
11
Operations
Turning On
1
2
3
Press the POWER SWITCH on the TV set.
If no picture appears and the red indicator lights up, the TV
set is in STANDBY mode. Press button on the remote
control, then the TV set is turned on.
When the TV set is in STANDBY mode, you can also press
the CH+/- buttons on the TV set to turn on the TV.
Note:
If there is no input signal to the TV when the TV is on, blue
background will appear on the screen. (when the BLUEBACK
is set to ON). After 15 minutes if there are still no TV signals
to the TV, it will access standby mode automatically.
1
2
Press the POWER SWITCH on the TV set if you want to cut
off the power completely.
If you want to turn off the TV set temporarily, press the
button on the remote control and the TV is in STANDBY mode.
Notes:
There are three kinds of Auto Power-off function:
1. When there is no input signal for 15 minutes.
2. Sleep-timer function.
3. Off-timer function
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Selecting Input Signal
12
Selecting Input Signal
Operations
Press AV button repeatedly. The screen displays input
signal source AV1/AV2/YUV/TV. Select the input signal
source you need.
In AV mode, you can press the digit buttons to switch
back to TV mode.
Press DSP button. The screen displays current state.
Press again to cancel.
1
2
3
Digit
DSP
AV
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Manual search
Tuning In
Auto search/Manual search
13
Operations
Auto search
Access PRESET menu.
Press CH+/- buttons to select AUTO.
Press VOL+/- buttons and the TV set starts
Auto channel preset. All active channels will be
preset and stored into the memory automatically
.
After presetting, the TV will display the first
channel.
During the process of Auto channel preset, pressing the MENU button
or the VOL+/- buttons will stop the process.
Note: Before you start Auto Search, we recommend you to set
a proper Sound System according to your local area.
If desired channel can not be preset by Auto search or if you would like
to preset channels to specific position numbers one by one, use manual
search function.
Firstly please select a channel number with
digit buttons or CH+/- buttons .You can also
access PRESET menu, select CHANNEL item
and adjust with VOL+/- button manually to select
the desired channel number (from 0~255).
In PRESET menu, select MANUAL item.
Press VOL+ button, the set searches towards
higher frequency. Press VOL- button, the set
searches towards lower frequency. The search
stops when a program is found and this
program will be stored in the specified position
number.
You can use band selection to quicken
search process. Select BAND item and press
VOL+/- buttons. The band switches among
VLF, VHF and UHF. Then select MANUAL
item and press VOL+/- buttons to start manual
search.
Repeat the above steps if you want to store another program in other
position number.
Press MENU button.
Press VOL+/- buttons to select PRESET menu.
Press CH- button to access PRESET menu.
1
2
3
VHF
0
1
ON
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
UHF
0
1
ON
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
P
R
E
S
E
T
Digit
CH+
CH-
VOL-
VOL+
MENU
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Fine tuning
Tuning In (continued)
Channel skipping/Fine tuning
14
Channel skipping
Operations
After presetting the channels, you can skip unnecessary position
numbers so that only the channels you want are selected.
Please select a channel number with
Digit buttons or CH+/- buttons. You can also
access PRESET menu, select CHANNEL
item and select a channel number with
VOL+/- buttons.
In PRESET menu, please select SKIP item
and press VOL+/- buttons to select ON.
Now the selected channel will be skipped
when you browse channels by CH+/-
buttons.
To restore a skipped channel, please exit menu first and use Digit
buttons to select the skipped channel number. Then access the
PRESET menu, select SKIP item and set it to OFF.
When picture and sound's effect of a channel is poor (for example:
one or two CATV channel's picture and sound are not standard), you can
correct them by making use of Fine tuning.
Please select a desired channel number
with Digit buttons or CH+/- buttons. You can
also access PRESET menu, select CHANNEL
item and select the channel by VOL+/- buttons.
In PRESET menu, select FINE item ,then
press and hold VOL+/- buttons until the best
picture and sound are obtained.
UHF
0
1
ON
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
P
R
E
S
E
T
UHF
0
1
OFF
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
Digit
CH+
CH-
VOL-
VOL+
MENU
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Setting colour system
Setting sound system
Channel exchange/Setting colour system/Setting sound system
15
After channel presetting, you can edit the order of the
programs by using the channel exchange function.
Access PRESET menu and select TARGET
item.
Press VOL+/- buttons to select a target
channel number that you would like to
exchange with the current channel. Then
select EXCHANGE item and press VOL+/-
buttons to confirm.
Now the programs in the current channel, and
target channel will exchange.
You can select the current channel in the
PRESET menu by adjusting CHANNEL item.
If the picture's colour is abnormal, you can adjust colour
system as follows.
In PRESET menu, select SOUNDSYS item.
Press VOL+/- buttons to select a proper
sound system.
Channel exchange
Access PRESET menu and select COLORSYS
item. Press VOL+/- button to select a proper
colour system.
0
1
ON
ON
CHANNEL
EXCHANGE
TARGET
SKIP
AFT
P
R
E
S
E
T
0
1
ON
ON
CHANNEL
EXCHANGE
TARGET
SKIP
AFT
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
Digit
CH+
CH-
VOL-
VOL+
MENU
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Press --/--- button
repeatedly to
display "---"
Press --/--- button
repeatedly to
display "--".
Press 0-9 direct
channel selector.
Press --/--- button to
display "-".
Selection Channel
Use 0-9 buttons and --/--- buttons/Use CH+/- Buttons/Use the PREVIOUS button
16
Operations
Use Digit buttons
To select one-digit channel
To select two-digit channel
To select three-digit channel
Note: The maximum channel number is 255, the set does not act if
the channel number you input is out of the range of 0~255.
Use CH+/- buttons
Press CH+ button, the channel number increases;
Press CH- button, the channel number decreases.
Use previous channel button
Press button to switch between the current channel
and previous channel.
1
8
Press 0-9
buttons.
Press 1-9
buttons.
--
-1
18
168
Press 1-2
buttons.
Press 0-9
buttons.
Press 0-9
buttons.
---
-- 1
-16
2
3
Digit
CH+
CH-
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
50
50
50
50
50
CONTRAST
BRIGHT
COLOR
SHARPNESS
TINT
P
I
C
T
U
R
E
Item
STANDARD
VOL+
stronger
lighter
deeper
sharper
greenish
VOL-
weaker
darker
paler
softer
purplish
Item
CONTRAST
BRIGHT
COLOR
SHARPNESS
TINT
Picture Controls
Contrast/Brightness/Colour/Sharpness/Tint
17
Operations
Press CH+/- buttons
to select item
upwards or downwards
Press VOL+/-
buttons to adjust
selected item.
To adjust the picture's contrast.
To adjust the picture's brightness.
To adjust the picture's colour.
To adjust the picture's sharpness.
To adjust the picture's skin colour.
(This item is available only in NTSC)
Press MENU button to display PICTURE menu.
Press CH+/- buttons to select item upwards or downwards.
Press VOL+/- buttons to adjust selected item.
You can press P.M button to select
picture mode: STANDARD,
DYNAMIC, SOFT, PERSONAL.
75
75
50
50
50
100
75
75
50
50
50
50
50
50
50
Picture mode
DYNAMIC SOFT
Notes:
1. The item TINT is for NTSC only.
2. The above parameters maybe different in different models.
1
2
3
4
STANDARD
DYNAMIC
PERSONAL
SOFT
CONTRAST
BRIGHT
COLOR
SHARPNESS
TINT
50
50
50
50
50
CONTRAST
BRIGHT
COLOR
SHARPNESS
TINT
P
I
C
T
U
R
E
P.M
CH+
CH-
VOL-
VOL+
MENU
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Palsonic CRT Television 5125PF User manual

Palsonic
Brand
Palsonic
Model
CRT Television 5125PF
Category
CRT TVs
Type
User manual
This manual is also suitable for

Palsonic CRT Television 5125PF comes with a full function remote control, allowing you to operate it from a distance. It has an on-screen menu display for easy navigation and adjustment of various settings. You can connect multiple devices to the TV, including DVD players, VCRs, and gaming consoles, thanks to its two groups of Video/Audio input terminals and one group of DVD input terminals. The TV also features an intellectualized I2C-bus control and digital AFT technology for enhanced picture and sound quality.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents