FINDKNSGRIPENLFGBD
5019 308 01061 Printed in Italy 06/12
The fan ensures a uniform temperature inside the
refrigerator compartment, for optimum food
storage. To activate the fan, press the
corresponding button (10a). We recommend the
fan is switched on if water droplets form on the
glass shelves.
Note: Do not obstruct the air inlet with food
(10b).
The fan will ONLY run if the compressor is
working.
We recommend the fan is switched off to
reduce energy consumption
BUTTON-OPERATED FAN
(if applicable)
A. Temperature setting button (changes the
temperature setting in a loop) and activation of
Vacation mode
B. Vacation mode operation LED
C. Set temperature display LED:
- LED 1: lowest temperature
- LEDs 1 and 2: medium-low temperature
- LED 2: medium temperature
- LEDs 2 and 3: medium-high temperature
- LED 3: high temperature
Vacation mode reduces energy consumption when
the user is away for a prolonged period.
To activate the function, press button A for 3
seconds: indicator lamp B must light up. Press key
A to restore normal function of the refrigerator
compartment. After activating the function,
remove perishable food from the refrigerator
compartment and keep the door closed, since the
refrigerator maintains an adequate temperature to
avoid odours.
The refrigerator can operate at ambient
temperatures between +10°C and +38°C.
Optimal performance is obtained at temperatures
between +16°C and +38°C.
Note: Ambient air temperature, the
frequency of door opening and the position of
the appliance can affect the internal
temperatures of the refrigerator. Take these
factors into consideration when setting the
thermostat knob.
To switch the appliance off totally, unplug it
from the mains.
REFRIGERATOR COMPARTMENT
CONTROLS
(depending on the model)