AEG L61470BI is a washing machine that offers a variety of features to make laundry day easier. With a maximum load capacity of 7kg, it's perfect for medium-sized households. Choose from a range of programs, including Time Save for a quicker wash, Extra Rinse for those with sensitive skin, and Stain for tough marks.
AEG L61470BI is a washing machine that offers a variety of features to make laundry day easier. With a maximum load capacity of 7kg, it's perfect for medium-sized households. Choose from a range of programs, including Time Save for a quicker wash, Extra Rinse for those with sensitive skin, and Stain for tough marks.
USER
MANUAL
EN User Manual
Washing Machine
L61470BI
CONTENTS
1. SAFETY INFORMATION.............................................................................................3
2. SAFETY INSTRUCTIONS.............................................................................................4
3. PRODUCT DESCRIPTION...........................................................................................6
4. CONTROL PANEL....................................................................................................... 7
5. PROGRAMMES ...........................................................................................................9
6. CONSUMPTION VALUES......................................................................................... 11
7. OPTIONS....................................................................................................................12
8. SETTINGS...................................................................................................................13
9. BEFORE FIRST USE................................................................................................... 13
10. DAILY USE................................................................................................................14
11. HINTS AND TIPS..................................................................................................... 16
12. CARE AND CLEANING.......................................................................................... 17
13. TROUBLESHOOTING.............................................................................................22
14. INSTALLATION........................................................................................................23
15. TECHNICAL DATA..................................................................................................31
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.aeg.com
2
1. SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
• Keep all packaging away from children and dispose of
it appropriately.
• Keep detergents away from children.
• Keep children and pets away from the appliance when
the door is open.
• If the appliance has a child safety device, this should
be activated.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2
General Safety
• Do not change the specification of this appliance.
• Do not exceed the maximum load of 7 kg (refer to the
"Programme chart" chapter).
• The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
ENGLISH
3
• The ventilation opening in the base (if applicable)
must not be covered by a carpet, mat, or any floor
covering.
• The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
• Old hose sets must not be reused.
• If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
• Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
• Do not use high pressure water sprays and/or steam
to clean the appliance.
• Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
2. SAFETY INSTRUCTIONS
2.1 Installation
• Remove all the packaging and the
transit bolts.
• Keep the transit bolts in a safe place.
If the appliance is to be moved in
future they must be reattached to lock
the drum to prevent internal damage.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not install or use a damaged
appliance.
• Follow the installation instruction
supplied with the appliance.
• Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
• The floor area where the appliance is
to be installed must be flat, stable,
heat resistant and clean.
• Make sure that there is air circulation
between the appliance and the floor.
• Adjust the feet to have the necessary
space between the appliance and the
flooring.
• Do not install the appliance where the
appliance door cannot be fully
opened.
• Do not put a container to collect
possible water leakage under the
appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
2.2 Electrical connection
• The appliance must be earthed.
• Always use a correctly installed
shockproof socket.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
www.aeg.com
4
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not touch the mains cable or the
mains plug with wet hands.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• This appliance complies with the
E.E.C. Directives.
2.3 Water connection
• Do not cause damage to the water
hoses.
• Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
• Ensure that there are no visible water
leaks during and after the first use of
the appliance.
2.4 Use
WARNING!
Risk of injury, electrical
shock, fire, burns or damage
to the appliance.
• This appliance is for household use
only.
• Follow the safety instructions on the
detergent packaging.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Make sure that all metal objects are
removed from the laundry.
• Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
• Do not touch the glass door while a
programme is in operation. The glass
can get hot.
2.5 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains electrical and water supplies.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
• Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
• Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
ENGLISH
5
3. PRODUCT DESCRIPTION
3.1 Appliance overview
7 8 9
10
1 2
3
4
5
6
1. Detergent dispenser
2. Control panel
3. Door handle
4. Rating plate
5. Drain pump filter
6. Feet for levelling the appliance
7. Water drain hose
8. Mains cable
9. Connection for water inlet hose
10. Feet for levelling the appliance
3.2 Accessories
1 2
4 3
1 Spanner
To remove the transit bolts.
2 Plastic caps
To close the holes on the rear side of the
cabinet after the removal of the transit
bolts.
3 Inlet Hose
To connect the appliance to the water
tap.
4 Plastic hose guide
To connect the drain hose on the edge of
a sink.
3.3 How to activate the child
safety device
This device prevents children or pets
from being closed in the drum.
Turn the device clockwise, until the
groove is horizontal.
You cannot close the door.
To close the door, turn the device
anticlockwise until the groove is vertical.
www.aeg.com6
4. CONTROL PANEL
4.1 Control panel description
1
10 9 8 7 6
2 3
5
4
A
B
C
1
10 9 8 7 6
2 3
5
4
A
B
C
1
Programme dial
2
Display
3
Delay start button (Delay start)
4
Phase indicators:
• A - Washing phase (Washing)
• B - Door lock (Door)
• C - Extra rinse (Extra Rinse)
5
Start/Pause button (Start/Pause)
6
Time saving button (Time Save)
7
Extra rinse button (Extra Rinse)
8
Stain button (Stains)
9
Spin selection button (Spin)
10
Temperature selection button
(Temp.)
4.2 Display
The display shows the following information:
ENGLISH 7
Duration of the selected programme
• After setting a programme, the duration is displayed in hours and mi-
nutes (for example ).
• After the programme has started, the remaining time is updated every
minute.
Delay Start
• When setting a delay start, the display shows the delay time (20 hours
max.) for about 3 seconds (for example ), and then it shows the
programme duration again.
• The delay time value decreases by one unit every hour and then, one
hour before the end of the programme, the time decreases in one mi-
nute intervals.
Incorrect option selection
• If the selected settings are not possible, the display shows the message
Err and the yellow light of Start/Pause button starts flashing.
Alarm codes
• If operating problems occur, the display will show various alarm codes,
for example (see chapter «Troubleshooting»).
End of programme
• At the end of the programme, the display shows a flashing zero .
Delay Start indicator
Child safety lock indicator
4.3 Phase indicators
A
B
C
A) After pressing the Start/Pause button,
the Washing indicator illuminates. The
appliance is operating.
B) The Door indicator indicates when the
door can be opened:
• indicator on: the door cannot be
opened.
• indicator flashing: the door is opening
in some minutes.
• indicator off: the door can be opened.
C) When the appliance performs
additional rinses, the Extra Rinse
indicator illuminates.
www.aeg.com8
5. PROGRAMMES
5.1 Programme Chart
Programme
Temperature range
Maximum load
Maximum spin
speed
Programme description
(Type of load and soil level)
Washing programmes
Cottons
95°C - Cold
7 kg
1400 rpm
White cotton and coloured cotton.
Normal soil and light soil.
Cottons + Prewash
1)
95°C - Cold
7 kg
1400 rpm
White cotton and coloured cotton.
Heavy soil and normal soil.
Synthetics
60°C - Cold
3 kg
1200 rpm
Synthetic items or mixed fabric items.
Normal soil.
Easy Iron
60°C - Cold
1.5 kg
1200 rpm
Synthetic items requiring a gentle
wash. Normal and light soil.
2)
Delicates
40°C - Cold
3 kg
1200 rpm
Delicate fabrics such as acrylics, vis-
cose, polyester items. Normal soil.
Wool/Silk
40°C - Cold
2 kg
1200 rpm
Machine washable wool, hand washa-
ble wool and delicate fabrics with
«hand washing» care symbol.
3)
Sport Intensive
40°C - Cold
3 kg
1200 rpm
Waterproof, sports and outdoor
items. Do not use any fabric softener!
Spin 7 kg
1400 rpm
To spin the laundry and to drain the wa-
ter in the drum. All fabrics, except
woollens and delicate fabrics.
Drain 7 kg To drain the water in the drum. All fab-
rics.
Delicate Rinses
Cold
7 kg
1400 rpm
To rinse and spin the laundry. All fab-
rics, except woollens and very delicate
fabrics. Reduce the spin speed accord-
ingly to the type of laundry.
Jeans
60°C - Cold
3 kg
1200 rpm
Items in denim and jersey. Also for
dark coloured items.
Refresh
30°C
3 kg
1200 rpm
Cotton and synthetic items with light
soil level or worn only once.
ENGLISH 9
Programme
Temperature range
Maximum load
Maximum spin
speed
Programme description
(Type of load and soil level)
Mix 20°
20°C
3 kg
900 rpm
Special programme for cotton, synthetic
and mixed fabrics lightly soiled. Select
this programme to reduce the energy
consumption. Make sure that the deter-
gent is suitable for low temperature in
order to have good washing results.
Cottons Eco
4)
60°C - 40°C
7 kg
1400 rpm
White cotton and fast-coloured cot-
ton. Normal soil. The energy consump-
tion decreases and the time of the wash-
ing programme is extended.
1)
If using liquid detergent, a programme without Prewash must be selected.
2)
To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin
phase. The appliance adds some rinses.
3)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
4)
Standard programmes for the Energy Label consumption values. According to regulation
1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Stand-
ard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and
water consumption for washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature declared
for the selected programme.
Programme options compatibility
Programme
Spin
Stains
1)
Extra Rinse
Time Save
2)
Cottons ■ ■ ■ ■ ■
Cottons + Prewash ■ ■ ■ ■
Synthetics ■ ■ ■ ■ ■
Easy Iron ■ ■ ■
Delicates ■ ■ ■ ■ ■
Wool/Silk
■ ■
Sport Intensive ■ ■ ■
Spin ■
www.aeg.com10
Programme
Spin
Stains
1)
Extra Rinse
Time Save
2)
Drain
Delicate Rinses ■ ■ ■
Jeans ■ ■
Refresh ■
Mix 20° ■ ■ ■
Cottons Eco ■ ■ ■ ■
1)
This option can be selected only at a temperature of 40ºC or higher.
2)
If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully
load the appliance, however the washing results can be less satisfactory.
6. CONSUMPTION VALUES
The data in this table are approximate. Different variables can affect the
data: the quantity and type of laundry, the water and ambient tempera-
ture.
Programmes Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme du-
ration (mi-
nutes)
Remaining
moisture
(%)
1)
Cottons 60°C 7 1.35 67 150 52
Cottons 40°C 7 0.85 67 140 52
Synthetics 40°C 3 0.55 42 90 35
Delicates 40°C 3 0.55 63 65 35
Wool/Silk 30°C
2)
2 0.25 55 60 30
Standard cotton programmes
Standard 60°C cot-
ton
7 1.01 52 180 52
Standard 60°C cot-
ton
3.5 0.78 44 149 52
ENGLISH 11
Programmes Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme du-
ration (mi-
nutes)
Remaining
moisture
(%)
1)
Standard 40°C cot-
ton
3.5 0.61 44 140 52
1)
At the end of spin phase.
2)
Not available for some models.
Off Mode (W) Left On Mode (W)
0.10 0.98
The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC
7. OPTIONS
7.1 Temp.
When you set a programme, the
appliance automatically proposes a
default temperature.
Press this button repeatedly until the
indicator of the desired temperature
illuminates.
If you select the position Cold, the
appliance does not heat the water.
7.2 Spin
When you set a programme, the
appliance automatically proposes a
default spin speed. Press this button
repeatedly to select the desired spin
speed. The corresponding indicator
illuminates.
Additional spin option:
Rinse Hold
• If you select this option, the water of
the last rinse is not drained out to
prevent the fabrics from creasing. The
corresponding indicator illuminates.
The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The Door indicator is on. The door
stays locked to indicate that you must
drain the water.
To drain the water, please
read chapter "At the end of
the programme".
7.3 Stains
Set this option to add a stain phase to a
programme to treat heavily soiled or
stained laundry with stain remover. The
corresponding indicator illuminates.
This option increases the programme
duration.
This option is not available
with a temperature lower
than 40° C.
Put the stain remover into compartment
.
7.4 Extra Rinse
Set this option to add rinsing phases to a
programme. The corresponding
indicator illuminates.
Useful for people allergic to detergents
and in areas where the water is soft.
The phase indicator Extra Rinse
illuminates.
www.aeg.com
12
7.5 Time Save
With this option you can decrease the
programme duration:
• Press this button once to set
"Shortened duration" for items with
daily soil.
• Press this button twice to set "Extra
Quick" for slightly soiled items only.
The display shows the decreased
washing time.
Some programmes accept
only one of the two options.
7.6 Delay start
With this option you can delay the start
of a programme from 30 min to 20 hours.
The display shows the delay time value
for some seconds, then it shows the
duration of the programme again.
The Delay start indicator appears on the
display.
8. SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press the Spin button and the
Stains button simultaneously for 6
seconds.
If you deactivate the
acoustic signals, they
continue to operate when
the appliance has a
malfunction.
8.2 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Temp. and Spin simultaneously
until the phase indicator Extra Rinse
illuminates/goes off.
8.3 Child Lock
With this option you can ensure that
should children touch the panel, the
settings will not be altered.
• To activate/deactivate this option,
press the Stains button and the Extra
Rinse button simultaneously until the
indicator
comes on/goes off.
You can activate this option:
• After you press the Start/Pause
button: the options and the
programme knob are locked.
• Before you press the Start/Pause
button: the appliance cannot start.
9. BEFORE FIRST USE
1. Pour 2 litres of water into the
detergent compartment for washing
phase.
This activates the drain system.
2. Pour a small quantity of detergent
into the compartment for washing
phase.
3. Set and start a programme for cotton
at the highest temperature without
placing any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
ENGLISH 13
10. DAILY USE
10.1 Loading the laundry
Open the water tap. Connect the mains
plug to the mains socket.
1. Pull the door handle to open the
appliance door.
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum. Refer to "Programmes"
chapter for the maximum recommended
loads.
4. Close the door.
CAUTION!
Make sure that no laundry
becomes trapped between
the seal and the door. There
is a risk of water leakage or
damage to the laundry.
10.2 Filling the detergent and
other treatments
MAX
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid treatments
(fabric conditioner, starch).
Maximum level for quantity of liquid
treatments.
Always follow the
instructions that you find on
the packaging of the
detergent products.
10.3 Setting a programme
Turn the programme selector dial to the
required programme.
The programme dial determines the type
of washing cycle (e.g. water level, drum
movement, number of rinses) and the
washing temperature according to the
type of laundry.
The indicator of Start/Pause button starts
flashing.
The programme dial can be turned
either clockwise or anticlockwise.
Off = Reset programme/switching OFF
of the appliance
If you turn the programme
dial to another programme
when the appliance is
working, the yellow indicator
of Start/Pause button flashes
3 times. The display shows
the message Err to indicate
a wrong selection. The
appliance does not perform
the newly selected
programme.
10.4 Starting the programme
without the delay start
Press the Start/Pause button to start the
programme. The corresponding red
indicator stops flashing.
The indicator Washing is on to indicate
that the appliance starts operating.
The indicator Door is on to indicate the
door is locked.
www.aeg.com
14
If you have chosen a delayed start with
theDelay start button, the appliance will
begin the countdown.
If you set an incorrect option, the yellow
indicator of the Start/Pause button
flashes 3 times. The display shows the
message Err for some seconds.
10.5 Starting a programme
with the delay start
Set the delay start before starting the
programme.
• After having set all the required
options, press the Delay start button
repeatedly to set the required delay.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2
hours and then by 1 hour up to a
maximum of 20 hours.
The indicator appears on the
display.
• Press the Start/Pause button.
The appliance starts the countdown
of the delay start.
When the countdown is completed,
the programme starts automatically.
The set delay time value appears on
the display for about 3 seconds, then
the duration of the programme
appears again.
You can modify or cancel the delay time
at any moment, before pressing the
Start/Pause button.
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time,
press the Start/Pause button to pause
the appliance. When the Door indicator
goes off , the door can be opened. Add
the laundry, close the door and press the
Start/Pause button again.
Cancelling the delayed start
• Press the Start/Pause button to pause
the appliance;
• Press the Delay start button until the
symbol
’ is displayed;
• Press theStart/Pause button again to
start the programme.
The set delay can be
changed only after you have
set the washing programme
again.
The Delay Start cannot be set with Drain
programme.
10.6 Altering an option or a
running programme
It is possible to change some options
before the programme operate. Before
you make any change, you must press
the Start/Pause button to pause the
appliance.
Changing a running programme is
possible only by resetting it.
Turn the programme dial to Off and then
to the new programme position.
Press the Start/Pause button again to
start the new programme. The washing
water in the tub will not be drained.
10.7 Interrupting a
programme
Press the Start/Pause button to interrupt
a programme which is running, the
corresponding indicator starts flashing.
Press the Start/Pause button again to
restart the programme.
10.8 Cancelling a running
programme
Turn the programme dial to Off to cancel
a programme which is running. Now you
can select a new programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.9 Opening the door
While a programme or the delay start
operates, the appliance door is locked.
If you need to open the door, press the
Start/Pause button to pause the
appliance.
ENGLISH
15
If the Extra Rinse indicator after a few
minutes goes off, the door can be
opened.
WARNING!
If you cannot open the door but you
need to open it, turn the programme dial
to Off to switch the appliance off. After a
few minutes the door can be opened
(pay attention to the water level and
temperature !) .
After closing the door, it is necessary to
set the programme and the options
again. Press the Start/Pause button to
start the programme again.
10.10 At the end of the
programme
The appliance stops automatically. The
indicator of the Start/Pause button and
the Washing phase indicator go off. A
flashing will appear on the display.
If you have set a programme or an
option that ends with water in the tub,
the Door indicator remains on. The door
is locked. The water must be emptied
out before opening the door.
During this time the drum continues to
turn at regular intervals until water drain.
Follow the below instructions to empty
the water out:
• Turn the programme dial to Off.
• Set the Drain or Spin programme.
• If necessary, reduce the spin speed.
• Press the Start/Pause button.
• When the programme is completed,
the display shows a flashing . The
Door indicator goes off. The door can
be opened.
Turn the programme dial to Off to switch
the appliance off.
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap.
Keep the door ajar to prevent mildew
and unpleasant smells.
10.11 Stand by
Once the programme has finished, after
a few minutes the energy saving system
will activate. The display will dim. Press
any button to deactivate the Stand By
function.
11.
HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11.1 The laundry load
• Divide the laundry into: white,
coloured, synthetics, delicates and
wool.
• Follow the washing instructions on the
laundry care labels.
• Do not wash white and coloured
items together.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty pockets and unfold.
• Turn multilayered fabrics, wool and
items with printed illustrations inside
out.
• Remove hard stains.
• Wash heavy soil stains with a special
detergent.
• Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.
• Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights, etc. ).
• A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
a. interrupt the programme and
open the door (refer to
"Opening the door when a
programme or the delay start
operates");
www.aeg.com
16
b. manually redistribute the load so
that the items are spaced evenly
around the tub;
c. press the Start/Pause button. The
spin phase continues.
11.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
Special stain removers are available. Use
the special stain remover that is
applicable to the type of stain and fabric.
11.3 Detergents and other
treatments
• Only use detergents and other
treatments specially made for
washing machines:
– powder detergents for all types of
fabric,
– powder detergents for delicate
fabrics (40 °C max) and woollens,
– liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special ones for
woollens only.
• Do not mix different types of
detergents.
• To help the environment, do not use
more than the recommended quantity
of detergent.
• Follow the instructions that you find
on the on packaging of these
products.
• Use the recommended products for
the type and colour of the fabric, the
programme temperature and the
level of soil.
11.4 Ecological hints
• Set a programme without the
prewash phase to wash laundry with
normal soil.
• Always start a washing programme
with the maximum load of laundry
allowed.
• If necessary, use a stain remover when
you set a programme with a low
temperature.
• To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
11.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
To find out the water hardness in your
area, contact your local water authority.
Use the correct quantity of water
softener. Follow the instructions that you
find on the packaging of the product.
12.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1 External cleaning
Clean the appliance with soap and warm
water only. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
12.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you
use a water descaling product for
washing machines.
Regularly examine the drum to prevent
limescale and rust particles.
To remove rust particles use only special
products for washing machines. Do this
separately from the laundry wash.
ENGLISH 17
Always follow the
instructions that you find on
the packaging of the
product.
12.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:
• Remove all laundry from the drum.
• Select the cotton programme with the
highest temperature with a small
quantity of detergent.
12.4 Door seal
Regularly examine the seal and remove
all objects from the inner part.
12.5 Cleaning the detergent dispenser
1.
MAX
1
2
2.
MAX
3. 4.
MAX
12.6 Cleaning the drain filter
The pump should be inspected regularly
and particularly if:
• The appliance does not empty and/or
spin.
• The appliance makes an unusual
noise during draining due to objects
such as safety pins, coins etc. blocking
the pump.
• A problem with water drainage is
detected (see chapter
“Troubleshooting” for more details).
www.aeg.com18
WARNING!
Before unscrewing the pump
cover, switch the appliance
off and remove the mains
plug from the socket.
WARNING!
When the appliance is
operating and depending
on the programme selected
there can be hot water in the
filter. Never remove the filter
cover during a wash cycle.
Always wait until the
appliance has finished the
cycle and it is empty. When
refitting the filter cover,
ensure it is securely re-
tightened so as to stop leaks
and young children being
able to remove it.
To clean the drain filter:
1. Unplug the appliance.
2. If necessary, wait until the water has cooled down.
A B
3. Place a container close to the pump to
collect any spillage.
A = Cover filter.
B = Emergency emptying hose.
4. Release the emergency emptying hose,
place it in the container and remove its cap
cover.
1
2
5. When the water stops flowing, unscrew the
filter cover by turning it anti-clockwise and
remove the filter. Use pliers if necessary.
Always keep a rag nearby to dry up any water
spillages when removing the cover. Clean the
filter under a tap to remove any traces of fluff.
ENGLISH 19
6. Remove foreign bodies and fluff from the
filter seat and from the filter impeller.
7. Check carefully whether the pump impeller
rotates (rotation is not completely smooth). If
it doesn’t rotate, please contact the
Authorised Service Centre.
1
2
8. Put the cap back on the emergency
emptying hose and push back into position.
Use the guides to push the filter pump back
into place. Tighten the filter cover by turning
it clockwise.
12.7 Cleaning the inlet hose and the valve filter
1.
1
2
3
Remove the inlet hose from the tap and clean
its internal valve.
2.
Remove the inlet hose from the appliance by
loosening the ring nut.
www.aeg.com
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
AEG L61470BI is a washing machine that offers a variety of features to make laundry day easier. With a maximum load capacity of 7kg, it's perfect for medium-sized households. Choose from a range of programs, including Time Save for a quicker wash, Extra Rinse for those with sensitive skin, and Stain for tough marks.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
