26 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 653838
653838 ProClip
Angled mount
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320286538381
Item no 653838 fits:
Toyota FJ Cruiser 07-15 (Australia)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Peel off the cover of adhesive tape on the ProClip. Open the glove compartment door. Press the angled edge
on the upper part of the ProClip into the gap in the dashboard ledge.
2. Press firmly forward on the lower part of the ProClip so the angled edge hooks under the dashboard edge.
Press until you see or hear/feel it snaps into place.
3. Press firmly upwards on the ProClip to make sure it is properly attached. Close the glove compartment door.
4. The ProClip is in place.
2(2)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI