ISSUED: 08-29-02 SHEET NO: 200-9723-4 10-06-06
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessmounts.com
© 2006 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
TECHNICAL DATA SHEET
- Solid•Point
™
Wall Mount with Tilt and Swivel for 42” - 71” Plasma Screens
page 1 of 2
MODEL: PS 2
The PS 2 plasma screen wall mount allows for optional viewing
selection by providing continuous screen adjustment with a
maximum 10° forward, 5° backward, and 15° swivel from left to
right. Screen orientation can be changed from horizontal to vertical.
Mount allows for leveling adjustment for plasma to sit level at any
angle. 26” wall plate mounts to 2 studs with 16” centers.
Features:
• Adjustable screen tilt with a max. 10° forward, 5° backward
• 15° swivel from left to right; no tools required
• Screen mounts horizontally or vertically
• Mount provides manual leveling adjustment for plasma to sit
level at any angle; no tools required
• Heavy gauge cold rolled steel construction
• Scratch resistant black fused epoxy finish
• Theft resistant security fasteners secure monitor
• Accommodates 42"-71” screens
Components of PS 2:
• Rotation box
• Tilt pivot retainer assembly
• Pitch roll assembly
• Wall arm assembly
• Wall plate
• Security screws
• Wood stud mounting hardware
• Concrete mounting hardware
• PLP adapter plate must be ordered separately
Dimensions:
Weight:
21.8 lb (10 kg)
Shipping weight:
26.5 lb (12 kg)
Maximum Load Capacity:
225.0 lb (102.3 kg)
Shipping Carton dimensions:
L= 36.625 in (930 mm)
W= 15 in (381 mm)
H= 9.875 in (251 mm)
A R C H I T E C T S S P E C I F I C A T I O N S
The Wall Mount with Tilt and Swivel shall be a Peerless model PS 2 and shall be located where indicated on the plans. It shall be constructed
of heavy gauge cold rolled steel with 0
o
-10
o
adjustable forward and 5° backward tilt with 15° swivel. The finish shall be scratch resistant Black
Fused Epoxy. Assembly and installation shall be done according to instructions provided by the manufacturer.
Note: Wall mount and dedicated
adapter plate sold separately
ISSUED: 08-29-02 SHEET NO: 200-9723-4 10-06-06
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessmounts.com
© 2006 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
0
o
- 10
o
TILT
FRONT VIEW
SIDE VIEW
A
B
HEIGHT
WIDTH
LENGTH
plasma
vertical
position
horizontal
position
adapter plate
(not included)
center of
adapter plate
6.125”
(156mm)
TECHNICAL DATA SHEET
page 2 of 2
MODEL: PS 2
WALL PLATE DETAIL
TOP VIEW
15° LEFT OR
RIGHT SWIVEL
A = 1/2 HEIGHT OF PLASMA + 6.125”
B = DEPTH OF PLASMA + .75” + 8.75”
M10 x 1.5(14 plcs.).300 hole
22.0”
(559mm)
11.54"
(293 mm)
10.025"
(255 mm)
10.125”
(257mm)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Peerless Industries PARAMOUNT PT640 User manual
-
-
-
-
Peerless Maximizer Products SS550P User manual
-
Philips PLA-1 User manual
-
-
Nantucket Sinks UM-13x10-W User manual
