Peerless PS 1 Datasheet

Category
Flat panel wall mounts
Type
Datasheet
ISSUED: 07-08-02 SHEET NO: 200-9706-5 09-17-07
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessmounts.com
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
TECHNICAL DATA SHEET
- Solid•Point
Wall Mount with Tilt and Swivel
page 1 of 2
MODEL: PS 1
The PS 1 plasma screen wall mount allows for optional viewing
selection by providing continuous screen adjustment with a
maximum 10° forward, 5° backward, and 15° swivel from left to
right. Screen orientation can be changed from horizontal to vertical.
Mount allows for leveling adjustment for plasma to sit level at any
angle. 26" wall plate mounts to 2 studs with 16" centers.
Features:
Adjustable screen tilt with a max. 10° forward, 5° backward
15° swivel from left to right; no tools required
Five attachment points for the wall arm at 3.25" (83mm)
Screen mounts horizontally or vertically
Mount provides manual leveling adjustment for plasma to sit
level at any angle; no tools required
Heavy gauge cold rolled steel construction
Scratch resistant black fused epoxy finish
Theft resistant security fasteners secure monitor
Accommodates 32"-50" screens
Components of PS 1:
Rotation box
Tilt pivot retainer assembly
Pitch roll assembly
Wall arm assembly
Wall plate
Security screws
Wood stud mounting hardware
Concrete mounting hardware
PLP adapter plate must be ordered separately
Dimensions:
Weight:
17.6 lb (8 kg)
Shipping weight:
24.4 lb (11 kg)
Maximum Load Capacity:
150 lb (68.2 kg)
Shipping Carton dimensions:
L= 36.625 in (930 mm)
W= 15 in (381 mm)
H= 9.875 in (251 mm)
A R C H I T E C T S S P E C I F I C A T I O N S
The Wall Mount with Tilt and Swivel shall be a Peerless model PS 1 and shall be located where indicated on the plans. It shall be constructed
of heavy gauge cold rolled steel with 0
o
-10
o
adjustable forward and 5° backward tilt with 15° swivel. The finish shall be scratch resistant Black
Fused Epoxy. Assembly and installation shall be done according to instructions provided by the manufacturer.
NOTE: Dedicated adapter plate
sold separately.
ISSUED: 07-08-02 SHEET NO: 200-9706-5 09-17-07
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessmounts.com
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
0
o
- 10
o
TILT
FRONT VIEW
SIDE VIEW
A
B
HEIGHT
WIDTH
LENGTH
plasma
vertical
position
horizontal
position
adapter plate
(not included)
center of
adapter plate
6.125"
(156mm)
TECHNICAL DATA SHEET
page 2 of 2
MODEL: PS 1
8.75"
(222mm)
WALL PLATE DETAIL
TOP VIEW
15° LEFT OR
RIGHT SWIVEL
A = 1/2 HEIGHT OF PLASMA + 6.125"
B = DEPTH OF PLASMA + .75" + 8.75"
14 x .33" dia. (8mm)
22"
(559mm)
11.58"
(294mm)
10.025"
(255mm)
3.25"
(83mm)
  • Page 1 1
  • Page 2 2

Peerless PS 1 Datasheet

Category
Flat panel wall mounts
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI