Actron CP7838 Specification

FEATURES

CP7838 - Professional Fuel Pressure Tester Kit

• Accurately measure fuel pressure on fuel injected and carburetor engines

• Adapters fit majority of domestic and import applications

• 40-inch gauge hose for ease of reaching any test point

• 2 1/2” gauge with 0-100 psi/0-700 kPa scales for accurate measurements

• Pressure relief button and 6-ft hose for safely disposing of gasoline and repeating

tests without disconnecting gauge

• Gauge boot to protect gauge and vehicle finish

CP7818 - Fuel Pressure Tester Kit

Use on domestic fuel injected vehicles equipped with Schrader valve test port.

• Large, easy-to-read 0-100 psi scale

• Solid brass fittings

• Pressure relief valve for safe, clean testing

CP7817 - GM TBI* - Fuel Pressure Tester

Tests GM TBI vehicles without a Schrader or fuel access valve test

port on the fuel rail.

• Test fuel pump check valve, fuel rail pop-off pressure, fuel rail deterioration, and

leaking injectors.

• Large, easy to read 0-60psi scale

• Adapter fitting for GM TBI systems without a fuel access valve test port

• Pressure relief valve for safe, clean testing

• Solid brass fittings

*Throttle Body Injection

FEATURES

FUEL PRESSURE For fuel injected engines and carburetor engines

Use to diagnose driveability

problems caused by out

spec fuel pressure.

Safely test vehicle fuel pressure systems including fuel pump check valve,

fuel rail pop-off pressure, fuel rail deterioration, and leaking injectors.

MECHANICAL TESTERS