Gamber-Johnson 7170-0136 Datasheet
- Category
- Mounting kits
- Type
- Datasheet
1
2
3
4
Solution Components:
1. Vehicle Base
(Item No. 7160-0182)
Vehicle Base is a no-drill solution and
attaches to the passenger side seat
studs. Designed using heavy gauge
steel for long-term durability.
2. O set Universal Mounting Step
(Item No. DS-STEP)
The O set Universal Mounting Step
moves the mounting system away from
passenger leg space towards the driver.
3. Lower Tube
(Item No. DS-LOWER-7)
The Lower Tube provides vertical
clearance over the center console or the
seat.
4. Upper Pole
(Item No. 7160-0177)
Center Upper Pole allows for closer
mounting to the dash and less stress
on the vehicle mounting equipment as
weight is centered on the pole. Wrench
is needed for loosening, tightening or
height adjustment.
5.
Locking Swing Arm
(Item No. 7160-0341)
Locking Swing Arm can rotate around
360° with locking points every 15°.
Motion Attachment has tilt capabilities
up to 90° forward/30° back and can be
swiveled up to 360°.
6. Support Brace
(Item No. 7160-0230)
Support Brace provides additional
mount system support in rugged driving
conditions and reduces mounting
system vibration.
Rugged Docking Stations and Vehicle Mounts
Pedestal System
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
5
6
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
Website: www.gamberjohnson.com
Item No. 7170-0136
Must order package as is. There are no substitutions.
Vehicle Solution Package:
Dodge Ram 1500-5500 (2002-2013)
Sterling Bullet 4500-5500 (2008)
-
1
Gamber-Johnson 7170-0136 Datasheet
- Category
- Mounting kits
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Gamber-Johnson 7170-0133 Datasheet
-
-
-
-
-
-
-
-
-