Altronix HUBSAT43WP Datasheet

Altronix
Brand
Altronix
Model
HUBSAT43WP
Category
AV extenders
Type
Datasheet

This manual is also suitable for

Altronix HUBSAT43WP is an Outdoor Passive UTP Transceiver Hub with Integral Camera Power. It provides 4 camera channels in a wall mount enclosure. The unit transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Video transmission range is up to 750 ft. max. per channel. The unit is compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners.

In addition, the HUBSAT43WP features 24VAC or 28VAC PTC protected outputs and surge suppression.

Altronix HUBSAT43WP is an Outdoor Passive UTP Transceiver Hub with Integral Camera Power. It provides 4 camera channels in a wall mount enclosure. The unit transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Video transmission range is up to 750 ft. max. per channel. The unit is compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners.

In addition, the HUBSAT43WP features 24VAC or 28VAC PTC protected outputs and surge suppression.

Altronix HubSat4WP Outdoor Passive UTP Transceiver Hub w/Integral Camera
Power transmits UTP video, RS422/RS485 data and power over a single CAT-5
or higher structured cable. Unit provides 4 camera channels in a wall mount
enclosure. Video transmission range is up to 750 ft. max. per channel. Units are
compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit
features 24VAC or 28VAC PTC protected outputs and surge suppression.
Optionally, the HubSat4WP can be used as an accessory module to transmit
video from up to 4 cameras over a single CAT-5 or higher structured cable back
to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP
Transceiver Hubs. In addition, the HubSat4WP powers these cameras locally to
eliminate the possibility of voltage drop associated with long cable runs.
HubSat4WP - Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubSat4WP - I10I
Overview
Input:
• 115VAC 50/60Hz, 1.25 amp.
• Primary fuse is rated at 3.5 amp/250V.
Video:
• Four (4) channels of video o
ver twisted pair
up to 750 ft.
• Four (4) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
•
Unit provides up to 1 amp max. per channel not to
exceed a total of 4 amp (100VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
•
Surge suppression.
Visual Indicators:
• Four (4) individual power LED indicators.
Features:
• Wall mount enclosure.
Accessories:
• Video Balun/Combiners:
- HubW
ayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Enclosure:
• NEMA4 / IP65 Rated.
• Enclosure dimensions:
12”H x 8”W x 6”D
Shipping Weight (approximate):
- HubSat4WP: 13.75 lbs.
-
HubSat42WP: 14.5 lbs.
-
HubSat43WP: 15.0 lbs.
HubSat4WP
Outdoor P
assi
ve UTP Transceiver Hub with Integral
Camera P
o
w
er
. Video Balun/Combiners not included.
HubSat42WP
Outdoor Passive UTP Transceiver Hub with Integral
Camera P
o
w
er includes four (4) HubW
a
yA
v
V
ideo
Balun/Combiners.
HubSat43WP
Outdoor P
assi
ve UTP Transceiver Hub with Integral
Camera P
o
w
er includes four (4) HubW
ayDv Video
Balun/Combiners.
Specifications
Models
Agency Appr
ovals
CE Appro
v
ed.
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Enclosure Dimensions
12”H x 8”W x 6”D
0.75"
0.75"
11.25"
12.00"
10.00"
8.77"
8.00"7.40"
0.50"
2.00"
0
.77"
6.00"
H
ubWayAv
• Compatible with HubWay
®
,
HubWay
®
LD and HubSat
®
UTP
Transceiver Hubs for use with
24VAC cameras.
H
ubWayDv
• Compatible with HubWay
®
,
HubWay
®
LD and HubSat
®
UTP
Transceiver Hubs for use with
12VDC cameras.
H
ubWayDvi
• Compatible with HubWay
®
,
HubWay
®
LD and HubSat
®
UTP
Transceiver Hubs for use with
12VDC cameras without isolation.
Vidoe Balun/Combiners
  • Page 1 1
  • Page 2 2

Altronix HUBSAT43WP Datasheet

Altronix
Brand
Altronix
Model
HUBSAT43WP
Category
AV extenders
Type
Datasheet
This manual is also suitable for

Altronix HUBSAT43WP is an Outdoor Passive UTP Transceiver Hub with Integral Camera Power. It provides 4 camera channels in a wall mount enclosure. The unit transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Video transmission range is up to 750 ft. max. per channel. The unit is compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners.

In addition, the HUBSAT43WP features 24VAC or 28VAC PTC protected outputs and surge suppression.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents