Pack Contents*
Sample illustrations are to be found on the first page.
1. Pinnacle PCTV™ Quatro Stick
2. Passive mini rod antenna with magnetic foot
3. USB extension cable
4. Mini remote control with battery/batteries
5. A/V adaptor cable
6. Installation disk with software, drivers and instruction manual
7. Quick Start Guide
* Please note: the pack contents may vary from that illustrated depending on the version of your
product.
Set-up and Use
Connection to an Antenna or to the Cable (see Figure I)
Connect the rod antenna supplied, your house antenna or your cable connection to the
PCTV™ Quatro Stick antenna input BEFORE the stick is connected to the computer.
To connect a house antenna or the cable connection you require the appropriate cable. Please note
that the quality of the cable has a significant effect on reception.
Please note: encrypted channels cannot be received with this product.
Please note that support for digital cable reception (DVB-C standard) is not possible in all regions and
cable networks. We aim to continually improve support for DVB-C in the course of further technical
product development. Please ensure that you always keep your TVCenter Pro software up to date.
Please note: if you use the rod antenna supplied, please position it as high and as close to the window
as possible. The reception depends on the location and can be affected by thick or steel-reinforced
walls and also neighbouring buildings. An external or roof antenna is required in such environments.
Mobile DVB-T reception, e.g. in the car or train, is not generally possible.
In order to prevent possible damage caused by the antenna foot’s magnetic field, please ensure that an
adequate distance to hard disks and other magnetically sensitive components is maintained.
Connection to your Computer (see Figure II)
Please connect the Pinnacle PCTV™ Quatro Stick to a USB 2.0 port of your computer.
Installing the TVCenter Pro Software
You require administrator rights to install the software on your Windows PC.
Should the “Add new software” dialog appear during installation, please close it by clicking the Cancel
button.
Place the supplied installation disk in the appropriate computer drive. The welcome dialog is shown
automatically if Autorun is activated on your PC. If the Autorun function is not active, please navigate
to the installation disk and double-click the Launcher file.
Please select TVCenter Pro in the welcome dialog.
Please follow the installation instructions displayed on the screen.
After installation, you may be asked to reboot your computer. It is important that you perform the
reboot in this case.
Using the Remote Control (see Figure III)
If you wish to operate your PCTV™ Quatro Stick with the optional remote control supplied, please
ensure that the remote control is pointed directly at the stick housing.
Using the A/V Adaptor Cable (see Figure IV)
If you wish to connect the PCTV™ Quatro Stick to an analog video camcorder to record video clips,
please use the A/V adaptor cable supplied.
You can also use the A/V adapter cable to connect your PCTV™ Quatro Stick to a cable/satellite set-
top box.
In both cases, please select the appropriate video input in the transmitter selection field in the TVCenter
Pro application.
Software images may vary depending on the version supplied.
Subject to design/technology modifications.