Emn
Clock setting
&an@e: Date. 9 December, 1996
Time... 16:15
1 Press the MENLVTVbutton.
2 Set the date and time using the numeric
buttons (O- 9).
Enter in sequence, 0912961615.
\
CLOCK SET
09.12.96
16:15
[+/-] +Tl ME SHIFT
[CLEAR] +TO CORRECT
[OKI +ENTER
If you entered a wrong number, press the
CLEAR button to delete it, then enter the
correct number.
For time shifting adjustment, simply press the
(CH+ or CH-) button.
3 When finished, press the
OK button.
● Seconds will start counting from “00” as
the OK button is pressed.
● The normal TV broadcast screen will return,
Additional tuning adjustments
Sorting the TV stations
&/e: TOchange TV1 from programme
position “4” to programme position “1”.
I TV4 TV2 TV3 ! Tvl \
..............
TV station
Programmepositionl ~ 2 3 ~ 4 ~
1
2
~
J ~J/
4 ~1~
i............i
Press the PRESET button.
Using the (CH+ or CH–) button select the
desir;d TV station
(e.g.’TVl).
TV1
I
3 Using the numeric buttons (O - 9), enter the
target programme position number (e.g.
“01 “).
4 Press the OK button
Repeat steps 2 to 4 to change another TV
station programme position number.
5 When finished, press the
PRESET button.
Fine tuning
If the tuning is not optimum, it can be
improved by manual fine tuning.
1 Press the PRESET button.
2 Press the
FF or REW button to obtain the
best possible picture and sound.
3 Press the OK button.
4 When finished, press the PRESET button.
Skip function
If only programme position numbers 1 to 30
have been preset, set the skip function for
programme position numbers 31 to 44, so
that only the preset TV stations will appear
when pressing the
(CH+ or CH-) button.
1 Press the PRESET button,
2 Using the numeric buttons or the
(CH+ or
CH–)
button, select the programme
position number to skip,
3 Press the
CLEAR button.
● The “S” indicator will light,
To cancel the skip function, press the
CLEAR button again to erase the “S”
indicator,
4 Press the
OK button.
Repeat steps 2 to 4 for every programme
position number to skip.
5 When finished, press the
PRESET button.
Manual tuning
This tuning mode can be used to modify the
settings entered by the Auto tuning function,
or to manually preset the TV stations to
particular programme position numbers
1
2
3
4
Press the PRESET button.
Using the
(CH+ or CH-) button, select the
desired programme position number.
Press the
PLAY button.
If the search stops on a broadcast other
than the one desired, press the
PLAY
button again until the broadcast from the
desired TV station appears on the TV
screen.
Press the
OK button when the desired TV
station appears on the TV screen.
Repeat steps 2 to 4 to preset another TV
station to another programme position
number,
5 When finished, press the
PRESET button.
2
PREPARATION
i
‘REsET7Fil
PLAY
u
ower interruption
thepower to the VCRhasfailed or
is beendisconnectedfor morethan
hour, the VCRdisplay shows
,,
.,-—
owever,the tuner presetmemorywill
]t beerased,So there isno needto
tune the
VCRstations.
]e
date,timeandrecording
formationregardingfuture
cordingsshouldbereset,
rstrefer
to “m Clock
!tting” on page6, to set theclock
ateand time), then, the timer
cording programmedshould beset
lain asdesired.
MewZealand only
runingorpresettingtheVCR
;hannels
rhis isvery important for correct
;-Code operation.
deallyfor simpleroperation,
:hannelsshould bepresetasfollows:
Television
Programme
station
position numbar
Tvl
1
TV2
2
TV3
3
coradditional channels in your
~reait is overto you to selectthe
nest logical channel position to
]Iace them.
*SkyTelevision
4
* CanterburyTV
5
*ActionTV
6
● Whenyou usetheG-Codefunction
to prograrnmearecordingfroma
certainchannelfor thefirsttime,itwill
askyou theprogrammeposition
numberthatchannelwaspresetto,
Thatsettingwill bememorizedand
automaticallysetthenexttimethe
samechannelisselected.