Page is loading ...
SLIDE AND NEGATIVE SCANNER
User Guide
PANSCN03, PANSCN03EU
2
Table of Contents
Important Safety Precautions ................................................................ 3
Introduction ............................................................................................. 4
What’s in the Box .................................................................................. 4
Overview of the Scanner ...................................................................... 4
Install Driver & PhotoImpression Software .......................................... 5
Loading Negatives .................................................................................. 7
Loading Positive Slides .......................................................................... 8
Connect Scanner to PC .......................................................................... 8
Launch PhotoImpression Software ....................................................... 9
Manage Scanned Images ..................................................................... 13
Save Your Results .............................................................................. 13
Frequently Asked Questions ............................................................... 13
Technical Specifications ...................................................................... 14
Limited Warranty ................................................................................... 15
UG-E_PANSCN03_PANSCN03EU_V1.0_04-09
3
Important Safety Precautions
Always follow these basic safety precautions when using your
scanner. This will reduce the risk of fire, electric shock, and injury.
Important: Do not expose this product to rain or moisture.
Caution: To avoid risk of electric shock, do not disassemble this
unit. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel
Ventilation: The device should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the unit should not be situated on a bed, sofa, rug, or similar
surfaces that may block the ventilation openings.
Heat: The device should be situated away from sources of high
heat such as radiators or stoves.
USB power source: The device should be connected to a USB
power supply from a connected computer with USB 2.0 compliant
connection.
Cleaning: We strongly suggest using a clean, dry, non-alcohol
cotton swab or the included cleaning brush to insert into the
scanner slot from the right side and clean the glass surface
periodically to produce a clear image.
Non-use: The USB cable should be unplugged from the computer
when the unit is left unused for a long period of time.
USB overloading: Do not overload the USB connections on your
computer. If you have other devices connected to your computer
such as a wireless mouse, MP3 player, mobile phone, or other
USB powered devices. If too many devices are connected to the
computer, there may be inadequate power for the scanner to
operate properly.
Servicing: The user should not attempt to service the device
beyond those means described in the operating instructions. All
other servicing should be referred to qualified service personnel.
Negative Trays: In some cases, the holes on the negatives will
not match exactly to alignment of the tray. This is caused by a
non-standard camera. In this case, there will be a small black line
on the edge of the image that can easily be cropped out using the
included PhotoImpression software.
4
Introduction
Thank you for purchasing the Pandigital Slide and Negative Scanner.
Now you can preserve your slides and photo negatives by scanning
them directly into your computer or onto a memory card as .jpg files.
What’s in the Box
Check your package for the following items:
Scanner with connected USB cable
Driver & PhotoImpression Software CD
Negative Film Tray
Positive Slide Tray
Quick Start Guide
User Guide (on CD)
Registration Card
Cleaning Brush
Overview of the Scanner
Right side
Negative & Slide tray slot
(insert only from right side)
Front Left side
5
Install Driver & PhotoImpression Software
System Requirements
Windows XP SP2, SP3
Vista 32-bit, Vista 64-bit
Not supported on Macintosh
384MB RAM
USB 2.0 Port
Positive Slide Tray Negative Film Tray
Back
Memory card slot
Power LED
Red light indicates scanner
is connected to PC
Top
USB cable
connected to
scanner
SCAN button
Used to perform scan
Cleaning Brush
6
CAUTIONS
To ensure a clear image, it is highly recommended to use a
clean, dry, non-alcohol cotton swab or the included cleaning
brush to insert into the scanner slot from the right side and
clean the glass surface.
Do not connect the scanner to your PC before finishing
installing driver and PhotoImpression software.
Disconnect all other USB devices from the computer that are
not currently being used.
Close all software windows you are not currently using.
The ArcSoft PhotoImpression software that is included with the
Pandigital Slide and Negative Scanner allows you to scan images
directly into the PC or onto a memory card. The software can also be
used to preview, organize, edit, and share your scanned images.
Before connecting the scanner to the computer for the first time,
install the driver & PhotoImpression software.
1. Insert the Driver & PhotoImpression CD into your PC.
2. This installation screen should appear:
If the installation screen does not appear, open a Windows
Explorer and double-click on the autorun.exe program icon:
7
3. Click
Driver & PhotoImpression.
4. After the driver installation, you can select a different
language for PhotoImpression if desired.
5. Follow the install wizard to install the PhotoImpression
software.
6. When the screen appears with the list of file types for
PhotoImpression software to be used as the default viewer,
click the
Clear All button or de-select the files types that you
don’t want to automatically open with this software.
7. The installed software will automatically create a
PhotoImpression icon on your desktop.
8. Remove the installation CD.
9. Unplug any unnecessary USB devices connected to your
computer.
10. To ensure an adequate power distribution to your USB 2.0
port, you must restart your computer.
Loading Negatives
Handle negatives with care; any dust,
scratches, or finger prints will appear on your
scanned images. If possible, use cotton gloves
when handling negatives. It is recommended to
use compressed air to remove any dust on the
negatives (not included, can be purchased from
an office supply or electronics retailer).
Hold up the negative towards light, with the
small negative numbers facing you (not a mirror
image) and the image should appear normally
(not upside down).
Open the negative tray at the marked spot on the top. With the
negative tray laid open, place the negative into the tray so the
notches line up with the notches on the tray.
8
Close the negative tray and press the edges so
that it locks into place.
Loading Positive Slides
Handle slides with care; any dust, scratches,
or finger prints will appear on your saved
images. If possible, use cotton gloves when
handling slides. It is recommended to use
compressed air to remove any dust on the
slides (not included).
Hold up the slide towards light, facing the
statement “this side toward screen” away from
you. Look through the slide; it should appear
normally (not upside down).
Open the slide tray at the marked spot on the top. With the slide
tray laid open, place the slide into the recessed area in the tray;
the slide should fit very well.
Close the tray and press the edges so that it
locks into place.
Connect Scanner to PC
CAUTION: If connecting to a laptop, be sure it is plugged into
an AC outlet to ensure sufficient power for the
scanner.
9
Windows XP:
1. Connect the scanner’s USB cable to a 2.0 USB port on your
PC; the power LED will be red.
2. The first time the PC recognizes the scanner, the Hardware
Wizard will automatically launch.
3. The wizard will sync the scanner with the previously installed
driver.
Windows Vista:
1. Connect the scanner’s USB cable to a 2.0 USB port on your
PC; the power LED will be red.
2. The first time the PC recognizes the scanner, the Hardware
Wizard will automatically launch. Select the
Locate and
Install driver software
option to synch up the hardware with
the software.
3. Wait until the message displays the driver has been
successfully installed.
Note: If multiple USB devices are connected to your computer,
such as mobile phones, media players, or other USB
powered devices, there may be inadequate power for the
scanner. Safely unplug all unnecessary USB devices
before scanning images with the scanner.
Launch PhotoImpression Software
1. Double-click on the PhotoImpression icon on your desktop, or
click on the Windows
START menu and launch
PhotoImpression from the Programs menu.
2. Wait for the application to launch. The program window opens,
similar to the following:
10
3. Select
Get Photos, and then select Acquire from Scanner
from the drop-down menu.
4. The first time you launch the software, a calibration must be
performed; the following message appears:
Remove the slide/film tray if necessary, click
OK, and then
wait for the calibration process to complete. The following
screen will be displayed:
5. Select the desired settings, and then click Acquire.
11
TIPS: 1) Only TIF format can be saved as 48bit color depth.
2) Click the folder icon to choose the location for
saving your scanned images on your computer or
memory card (if you have inserted a memory card in
the scanner).
6. Insert the negative or slide tray into the scanner slot from the
right side of the scanner.
7. Wait until the colors are stabilized, (click
Color/Brightness
Adjustment
to change colors if desired), and then click
Snap Shot or press the SCAN button on the scanner.
8. When the scan is complete, an image thumbnail will be
added to the film strip at the top of the window. Push the
negative/slide tray through the scanner to continue scanning
the originals.
12
NOTE: Up to 12 images can be scanned before transferring
them to your computer or memory card. If you scan a
13
th
image before transferring the images, it will
overwrite the 1
st
image.
9. Click
Transfer to save the scanned images displayed on the
film strip to your computer or memory card. Three status
messages will be displayed briefly for each image being
transferred. If desired, click a thumbnail image which you do
not want to save, and then click
Delete to delete the selected
image before clicking
Transfer.
After transferring the images, the thumbnails will remain
visible until you scan your next original.
NOTE: Do not minimize the OVT Scanner window after
transferring the images. Close the window by clicking
Exit/x and then you will have access to the scanned
images in the main software window.
File Naming Convention
When images are saved, the files are named by date and
number of images saved during the same day.
For example:
3-18-2009_001
3-18-2009_002
3-18-2009_003
You can then rename the files as desired.
13
Manage Scanned Images
You can now use the PhotoImpression software to preview, edit,
organize, and share your scanned images.
Click on an image to select it, and then use the PhotoImpresion tools
to modify as desired.
For more detailed information and features, use the
HELP function in
the PhotoImpression’s main window.
Save Your Results
1. When you're finished editing an image, click Save As; either
save with same name (overwrite the original file) or save
with a new name.
2. Click
Close to exit the Photo Editing module.
Frequently Asked Questions
Q: Why doesn’t my computer recognize the scanner after I
installed the driver and software?
A:
Be sure you are connecting to a USB 2.0 port, and make sure
you disconnect all other USB devices from the computer that are
not currently being used.
If you are using a laptop, make sure it is plugged into AC outlet
to ensure sufficient power.
If you still have trouble, restart your computer with the scanner
plugged into the USB 2.0 port.
Q: Why am I getting blurry images?
A: Ensure that the work space you are using is stable and does not
have any moving objects on it. Even the slightest vibrations can
affect the images.
Make sure there are no dust particles or hairs on your negatives
or slides.
14
Q: Why doesn’t my computer recognize the scanner now, even
though it previously scanned properly?
A: When reconnecting the scanner, always use the same USB port
that you used when installing the scanner driver.
If you still have trouble, unplug the scanner, restart your
computer, and then connect the scanner to a USB 2.0 port on
your computer.
Technical Specifications
Lens
F no. = 2.0, 4 Glass elements, Half-field
Angle=15
o
Sensor 5.1 mega pixels CMOS sensor
Focus Range
Fixed focus
Exposure Auto
Color balance Auto
Scan high resolution 3,600 dpi interpolation resolution
Data conversion 10 bits per color channel
Scan Method Single pass
Light source Backlight (3 white LEDs)
Resolution 2592X1680
Power Powered from USB
Interface USB 2.0 only
Operating System Windows XP SP2+ / VISTA
Software ArcSoft PhotoImpression 6 & scanner driver
Dimensions/Weight
3.7” x 4.2” x 7.0”
1.2 Lbs
On Screen Display (OSD)
Languages
English, French, German, Italian,
Spanish, Portuguese, Traditional
Chinese, Simplified Chinese, Japanese
15
Limited Warranty
The limited warranty set forth below is given by Pandigital with
respect to Pandigital brand electronics products purchased and used
in the United States of America. Pandigital warrants this product
against defects in material or workmanship as follows:
LABOR: For a period of one (1) year from the date of purchase, if
this product is found to be defective, Pandigital will repair or replace
the product, at its option, at no charge. After this one (1) year, labor
charges will be charged on a case by case basis.
PARTS: For a period of one (1) year from the date of purchase, if
this product is found to be defective, Pandigital will supply at no cost,
new or rebuilt replacement parts, at its option, at no charge. After this
one (1) year period, parts will be charged for on a case by case
basis. Modifications not approved by the party responsible for
compliance could void user’s authority to operate the equipment.
This warranty does not cover: (1) customer instruction, installation or
setup; (2) cosmetic damage or damage due to accident, misuse,
abuse or negligence; (3) commercial use of the product; (4)
modification of any part of the product; (5) damage due to improper
operation, improper maintenance, or connection to an improper
power supply; (6) loss of data, regardless of value or format, that
may result through proper and/or improper use of the product; (7)
damage due to an attempted repair of the product by anyone other
than a facility authorized by Pandigital to service the product; (8)
consumables (such as fuses and batteries). This warranty is valid
only in the United States.
The product must be accompanied by a copy of the original retail
purchase receipt. If no proof of purchase is attached, the warranty
will not be honored and repair costs will be charged. This warranty is
only valid with written documentation detailing the complaint
attached to the outside or inside of the carton. This warranty is
invalid if the factory applied serial number has been altered and or
removed from the product. This warranty does not provide protection
for the loss of data, regardless of format. Pandigital reserves the
right to modify and design this product without prior notice, written or
otherwise.
To obtain warranty service, you must deliver the product freight
prepaid in either its original packaging or packaging affording an
equal degree of protection, plus proof of purchase.
16
Repair or replacement as provided under this warranty is the
exclusive remedy of the consumer. Pandigital, its parent company,
affiliates or subsidiaries, shall not be liable for any incidental or
consequential damages for breach of any expressed or implied
warranty on this product. Except to the extent prohibited by
applicable law, any implied warranty of merchantability or fitness for
a particular purpose on this product is limited in duration to the
duration of this warranty.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitation on how long an implied
warranty lasts, so the above limitations or exclusions may not apply.
This warranty gives you specific legal rights, and you may have other
rights, which vary from state to state.
All content included on the Pandigital website as well as Pandigital
products, including pre-loaded demonstration images, digital media,
digital cookbooks, text, graphics, logos, designs, photographs, button
icons, images, audio/video clips, digital downloads, data
compilations, and software, is the property of Pandigital or its
suppliers and is protected by United States and international
copyright laws or other intellectual property laws and treaties. Said
content shall not be reproduced or used without express written
permission from Pandigital and its suppliers respectively.
Use of this product constitutes acceptance of these terms and
conditions of warranty.
Technical support telephone number: 1-800-715-5354.
/