Boss Audio Systems CAM22 Owner's manual

Brand
Boss Audio Systems
Model
CAM22
Category
Security cameras
Type
Owner's manual

This manual is also suitable for

Boss Audio Systems CAM22 is a mini rear-view flush mount camera with a 170-degree lens angle, providing a wide field of view for easy reversing. It features a high resolution of 420 TV lines, ensuring clear and detailed images. The camera is equipped with AGC (Automatic Gain Control), which automatically adjusts the gain to provide optimal image quality in varying lighting conditions. It also has an electronic shutter of 1/10,000 second, capturing sharp images even in fast-moving situations.

Boss Audio Systems CAM22 is a mini rear-view flush mount camera with a 170-degree lens angle, providing a wide field of view for easy reversing. It features a high resolution of 420 TV lines, ensuring clear and detailed images. The camera is equipped with AGC (Automatic Gain Control), which automatically adjusts the gain to provide optimal image quality in varying lighting conditions. It also has an electronic shutter of 1/10,000 second, capturing sharp images even in fast-moving situations.

Specifications
The above parameters can ba modified without separate notification
Images sensors:
PC1030
MT9V136
PC3030
Power upply:
DC9V - 15V
Lens Angle(Deg.):
170
TV System:
PAL/NTSC
Video Output:
1.0vp-p,75ohm
S/N Ratio:
48dB
IP rating:
IP68
Operating
-30 ~ +70 RH95%MAX.
White Balance: Auto
Minimum illumination:
0.5Lux
AGC:
Auto
Electronic shutter
1/60(NTSC) 1/50(PAL)
Effective pixels:
656*492
Resolution(TV Lines):
420 480
1/10,000second
Temperature(Deg.C):
User Manual
Mini Rear-view
Flush Mount Camera
Model : CAM22
Thank you for choosing Boss Audio.
DO NOT FULLY RELY ON THE REVERSE
CAMERA WHEN BACKING UP, know your
surroundings before backing.
142*100mm
Simple Troubleshooting Guide
Image Blurring
Please check if there is water stain or dust on
the camera.
.
Image Shaking
Please adjust and fix-up
.
No Image.
Please check if the power cable is well connected.
.
Note:
If any of the problems persist after check list had been made, consult your nearest
service dealer. Never attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is done properly before using the checklist .below
Problem
Cause/Solution
Image Slanting
Please adjust the bracket of camera
.
Please make sure good connection between the
video in and the monitor.
.
Please check if reverse gear is in place.
.
Please make sure correct setup of monitor.
.
Please make sure cleaness of the camera lens.
.
Red and black back lights 12V Line
DC 12V
DC 12V
AV
Power / video
Camera
Complete all of the required connections in the way that make all the lines
hided in the car.
Installation
1. Wire connection
2. Installation
The camera can be installed in the following way:
Flush-mount (see diagram 1)
Flush-mount: Install by drilling a hole on the rear bumper.
Attention: The camera switch is controlled by the reverse gear shift.
Car body
(diagram 1)
  • Page 1 1
  • Page 2 2

Boss Audio Systems CAM22 Owner's manual

Brand
Boss Audio Systems
Model
CAM22
Category
Security cameras
Type
Owner's manual
This manual is also suitable for

Boss Audio Systems CAM22 is a mini rear-view flush mount camera with a 170-degree lens angle, providing a wide field of view for easy reversing. It features a high resolution of 420 TV lines, ensuring clear and detailed images. The camera is equipped with AGC (Automatic Gain Control), which automatically adjusts the gain to provide optimal image quality in varying lighting conditions. It also has an electronic shutter of 1/10,000 second, capturing sharp images even in fast-moving situations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents