ZeeVee HDBridge 3000 User manual

ZeeVee
Brand
ZeeVee
Model
HDBridge 3000
Category
Supplementary music equipment
Type
User manual
HDbridge3000
CONFIGURATION GUIDE
NA
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
Important Safety Instructions. Save These Instructions.
WARNING: When using electronic products, basic precautions should always be followed, including:
1. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
9. Power cord must be accessible to allow for the removal of power from
the unit.
10. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Unplug the apparatus during lightning storms or when unused for long
periods of time.
12. Only use attachments/accessories specified by the manufacturer.
13. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. WARNING: To reduce the risk of fire or electric shock do not place this
apparatus in a position where it is exposed to dripping or splashing
liquids, rain, moisture, or excessively high humidity. Objects containing
liquid shall not be placed in proximity to the unit such that they present
a risk of spillage onto the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE THE COVER (OR BACK). NO USER
SERVICABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” with-in the
product’s enclosure that may be of sufficient magnitude
to constitute a risk to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
Page 2 | HDbridge3000 Configuration Guide
FCC Statement
FCC Compliance and Advisory Statement: This hardware device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1) this device may not cause harmful interfer-ence,
and 2) this device must accept any interference received including interference that may cause undesired
operation. This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a commercial installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no guarantee that inter-ference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna;
2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet
on a circuit different from that to which the receiver is connected;
4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment. Where shielded interface cables have been provided with the product or specified ad-ditional
components or accessories elsewhere defined to be used with the installation of the product, they must
be used in order to ensure compliance with FCC regulations.
www. zeevee.com
Welcome to ZeeVee.
ZeeVee products convert your video and audio source
to a digital cable channel and broadcast it over RF and
IP networks* to all your HDTVs. This guide walks you
through basic and more enhanced setup for ZeeVee’s
HDbridge3000 modulator.
If you run into problems during setup, feel free to contact
Technical Support at +1(877) 4-ZEEVEE (1.877.493.3833).
*Not all cards support RF and IP.
What’s in the Box
Here’s what you can expect to find when you open the package:
1 x ZeeVee HDbridge3000 Chassis with Control Module and 2x hot-swappable
power supplies. Media Modules are sold separately.
2 x Power Cords
Table of Contents
Panel Layout . . . . . . . . . 4-5
Basic Installation. . . . . . . . 6
Beginning setup. . . . . . . . . 6
Tuning your channel at
the HDTV (Auto Scan).. . . . . 6
Status Display . . . . . . . . . 7
Maestro Configuration . . . 8-11
Connecting with Maestro . . . . 8
Configuring RF numbers
and virtual channels . . . . . . 8
Map for configuring RF channels
and virtual channels . . . . . . . . 9
Using Auto Increment . . . . . . 10
Using other Maestro tabs . . . 11
Troubleshooting . . . . . . . . 14
Warranty . . . . . . . . . . . . 15
Contact ZeeVee . . . . . . . . 16
HDbridge3000 Configuration Guide | Page 3
Panel Layout
2 3 5 6
1 4 1
1
Card Slots
Slots are identified as 1 through 12, from left to right. Any combination of
cards can be installed using the HDbridge3000.
2
SD Card
This slot is reserved for future use.
3
Status Display
Displays configuration and system status. This display can also be found
on the opposite panel. See page 7 for details.
4
RF Out
Depending upon which cards are installed, the HDbridge3000 can transmit
up to 24 channels of HD content or 72 channels of SD content. Output
power can be set between +34 and +13 dBmV using the Maestro web
interface. The default output power setting is +34 dBmV.
5
MGMT and IP Out
Ethernet port provides access to the Maestro web interface and
distribution of video over IP networks.*
6
Power Supplies
100 - 240 V AC / 50 - 60 Hz, hot-swappable, dual-redundant power supplies.
Both AC power cords (included) must be connected to the HDbridge3000
for proper operation.
* Not all cards support IP out.
Page 4 | HDbridge3000 Configuration Guide www.zeevee.com
3 1 3
2
1
Display
Displays configuration and system status. This display can also be found
on the opposite panel.
2
Cooling Fans
Hot-swappable, high-capacity cooling fans. Air is pulled in from these fans
and expelled through the front panel. When installing the HDbridge3000,
make sure that these fans are not blocked and clear from other heat-
generating sources.
3
Rack Ears
Front or rear-mountable rack ears allow for flexible mounting options.
HDbridge3000 Configuration Guide | Page 5
Basic Installation
NOTE: Illustration shows HDbridge3000 with HDMI, Component/VGA, and Composite cards, which are sold separately.
Component and/or VGA cable
(Requires ZeeVee CAVC6 3.5mm plug to RCA
Composite AV cable)
AnalogComponent
Digital CC
x 2
CC
x 2
Audio Out Video Out
Audio
per card
per card
Ethernet cable
connects to LAN
(Requires ZeeVee CAVC6 3.5mm plug to RCA
Composite AV cable)
Composite
x 6
Video Out
per card
Power cords
to available
AC outlets
Optional Delay Matched
Coax cable connects to
coax network
Analog Audio Out to
audio system (requires
analog audio input)
4. Connect a coaxial cable from the RF Out port to the RF
Dly
Dly
Before operating the HDbridge3000, it is recommended to
network.
5. Connect the included AC power cords from both power
update to the latest version of firmware, which can be found
supplies to available AC outlets.
on the Support section of the ZeeVee website.
Beginning Setup
1. Install the desired module in each slot. Screws should be
hand-tightened. Do not use pliers or other high-torque
devices.
2. Connect each source device to each card using
the required cables. See the illustration, above, for
information.
3. Connect an Ethernet cable from the MGMT port to the
IP network or directly to the PC.
Tuning your channel at the HDTV (Auto Scan)
1. Select the Cable setting (not Air or Antenna) in your
TV menu.
2. Enter the RF number to tune directly to the channel.
If you cannot tune directly to the channel at this point, it is
because most TVs will require you to run a full Auto Scan.
NOTE: Defaults are RF # 2 through 25 with matching
channel numbers (e.g. 2/2/1, 3/3.1, etc). Composite cards
use three sub-channels per RF # (e.g. 2 / 2.1, 2.2, 2.3).
Page 6 | HDbridge3000 Configuration Guide www.zeevee.com
Status Display
The HDbridge3000 has a small display, located on both the front and back panel of the unit. When the display is in
"standby", the ZeeVee logo is displayed. Press the NAV wheel to display the IP address / port status of the HDbridge3000.
To change the IP address of the HDbridge3000, use the Network tab in the Maestro web interface.
HDbridge3000 Configuration Guide | Page 7
Maestro Configuration
Maestro is a configuration tool that is used to control all
features on the HDbridge3000.
Connecting with Maestro
1. Connect the HDbridge3000 to a LAN with a DHCP
server or directly to a PC using a standard Ethernet
cable. Do not use a crossover cable.
2. After a few moments, an IP address will appear at the
top of the display.
IP address
3. Using any web browser
(Chrome or Firefox preferred),
enter the IP address to launch
Maestro. Internet Explorer is
not supported but Microsoft
Edge is.
4. The Log In dialog will be
displayed. The default
password is admin. Login
is case-sensitive. To
change the password,
use the Device tab.
5. After the password is accepted, the Status tab is
displayed.
Configuring RF and channel numbers
1. Click on the RF Channel Plan tab.
2. Configure the RF # and Channel # fields.
3. Click in the RF # field and enter the RF number. RF
channels must be within 400 MHz of one another. Refer
to the map, on the next page, for more information.
4. Click in the Channel # field and enter a channel number
(virtual channel). The channel number is what the TV
displays. You can configure a channel number two ways:
• As a dotted number — Enter the number with a “.”
following it, for example, “5.1”. This is the default
display.
• As a dotless number — Enter the number with a “#”
preceding it, for example, “#5”. Note that you can
choose a channel number that is different from the
RF#. For instance, if your RF# is 3, you can choose
a channel number of 10.1 or #10.
5. Click Apply to save changes. Your unit stores
configurations so they are not lost on power-down.
6. Run Auto Scan at TV (see Tuning your channel at
the HDTV, page 5) when you have saved
configuration changes.
Page 8 | HDbridge3000 Configuration Guide www.zeevee.com
Map for configuring RF
channels and virtual channels
The table, to the right, shows how
logical RF channels are matched
with RF frequencies. Refer to this
map when configuring RF channels.
The highlighted areas, in the map,
indicate RF channels which are not
sequential.
NOTE: When entering RF channels,
they must be within 400 MHz of each
other.
To illustrate, Example 1 shows two RF
channels which are sequential and are
within 400 MHz of one another.
In Example 2, although the RF channels
are sequential, the difference between the
two RF frequencies exceeds 400
MHz. When a channel is beyond this
range, no output will be displayed. In
this example, channel 100 will be
"muted".
Example 1
RF Ch
Band (Mhz)
Difference
22
168 - 174
23
216 - 222
~48 MHz
Example 2
RF Ch
Band
Difference
99
114 - 120
100
648 - 654
~534 MHz
Cable TV Channels vs RF Frequency (MHz) Map
RF Ch.
Band (MHz)
RF Ch.
Band (MHz)
RF Ch.
Band (MHz)
RF Ch.
Band (MHz)
RF Ch.
Band (MHz)
2
54-60
27
240-246
57
420-426
87
600-606
122
780-786
3
60-66
28
256-252
58
426-432
88
606-612
123
786-792
4
66-72
29
252-258
59
432-438
89
612-618
124
792-798
5
76-82
30
258-264
60
438-444
90
618-624
125
798-804
6
82-88
31
264-270
61
444-450
91
624-630
126
804-810
95
90-96
32
270-276
62
450-456
92
630-636
127
810-816
96
96-102
33
276-282
63
456-462
93
636-642
128
816-822
97
102-108
34
282-288
64
462-468
94
642-648
129
822-828
98
108-114
35
288-294
65
468-474
100
648-654
130
828-834
99
114-120
36
294-300
66
474-480
101
654-660
131
834-840
14
120-126
37
300-306
67
480-486
102
660-666
132
840-846
15
126-132
38
306-312
68
486-492
103
666-672
133
846-852
16
132-138
39
312-318
69
492-498
104
672-678
134
852-858
17
138-144
40
318-324
70
498-504
105
678-684
135
858-864
18
144-150
41
324-330
71
504-510
106
684-690
HRC Frequencies =
Standard
19
150-156
42
330-336
72
510-516
107
690-696
Frequencies
20
156-162
43
336-342
73
516-522
108
696-702
minus 1.25 MHz
21
162-168
44
342-348
74
522-528
109
702-708
Except for:
22
168-174
45
348-354
75
528-534
110
708-714
Channel 5,
7
174-180
46
354-360
76
534-540
111
714-720
Video = 78.0 MHz
8
180-186
47
360-366
77
540-546
112
720-726
Channel 6,
9
186-192
48
366-372
78
546-552
113
726-732
Video = 84.0 MHz
10
192-198
49
372-378
79
552-558
114
732-738
IRC Frequencies =
11
198-204
50
378-384
80
558-564
115
738-744
Standard
12
204-210
51
384-390
81
564-570
116
744-750
Frequencies
13
210-216
52
390-396
82
570-576
117
750-756
Except for:
23
216-222
53
396-402
83
576-582
118
756-762
Channel 5, Video =
24
222-228
54
402-408
84
582-588
119
762-768
79.25 MHz
Channel 6, Video =
25
228-234
55
408-414
85
588-594
120
768-774
85.25 MHz
26
234-240
56
414-420
86
594-600
121
774-780
HDbridge3000 Configuration Guide | Page 9
Using Auto Increment
When several cards are installed, manually entering the RF
# and Channel # can become a lengthy process. To aid in
this process, use the Auto Increment feature to automatically
populate the desired fields.
1. Make sure all cards, that will be affected by the Auto
Increment feature, are selected. Select a card by checking
the box next to the card, under the Slot column.
If the card is "grayed-out" then the Auto Increment
feature will not affect that card.
check box
2. Click the RF # drop-down list and select
Auto Increment.
3. In the Auto-Increment dialog, enter the desired RF
channel in the First channel field.
4. Click the Channel check box and enter the desired
channel in the First channel field.
In this example, values 3 and 3.1 have been
entered. The value 3.1 may also be entered as #3.
5. Click the Set button to save the changes.
6. The Auto Increment dialog will indicate that the
values have been set.
7. Click the Close button.
8. The RF # and Channel # columns are now
automatically incremented, as shown.
9. Click the Apply button.
10. Maestro will apply the changes to each device. Once
all changes have been successfully applied, the Save
Configuration dialog will be displayed.
11. Click the Close button to dismiss the dialog.
NOTE: All saved settings are retained, even if the HDbridge3000
is powered-off. Card settings are automatically migrated when
swapping cards of the same type.
Page 10 | HDbridge3000 Configuration Guide www.zeevee.com
Using other Maestro tabs
Click on any other Maestro tab to configure your unit as needed. We provide brief information below. Please click on the
Help button on each tab or refer to the Support section of our website for further detail on configuration options.
AV Source tab
Allows for specifying audio and
video inputs and adjusting
settings such as Delayed Audio
Out (for matching audio to
external audio systems).
RF tab
Allows you to change the RF
power output. You can also
change from QAM256 to
QAM64 and from QAM
Standard to HRC or IRC.
Device tab
Allows you to change the
device password and update
firmware as well as configure
Emergency Alerts System
(EAS). For more information,
refer to the EAS application
note in the Support section on
our website.
HDbridge3000 Configuration Guide | Page 11
Network tab
Allows you to configure IP
settings. By default the
HDbridge3000 uses DHCP to
obtain an IP address for the
control module. To use an STB
or EAS, an IP address must be
assigned to each media module
(card) using the Static or
DHCP setting.
ZvShow tab
ZvShow allows for adding an
extra channel, using a video file,
to your broadcast line up. This
channel is disabled by default,
but can be enabled at any time
under the RF Channel Plan tab.
Visit zeevee.com/ zvshow
for details.
STB tab
Provides management of
DirecTV H25 receivers. For
more information, refer to
the ZvSTB application note
in the Support section on
our website.
Page 12 | HDbridge3000 Configuration Guide www.zeevee.com
Admin tab
Use this Admin tab to create
user accounts and grant
access to specific functions
within the Maestro web
interface. Maestro allows for
a total of 10 custom user
accounts, not including the
"admin" account.
Support tab
Provides technical support
contact information and
allows you to send logs for
troubleshooting.
HDbridge3000 Configuration Guide | Page 13
Troubleshooting
Unable to
If unable to connect, try one of the following:
Connect
If you are getting a page not found error when directly connected to a PC, try disabling WiFi. If that does not
to Maestro
correct it, make sure your PC is not using a static IP address. The PC and the HDbridge3000 unit must be on the
same IP subnet for them to communicate. For details on how to check for a static IP address, please see the FAQ
section of our website.
If the page loads, but all you see is a purple background and the ZeeVee logo (and are not prompted to log
in) please try a different web browser. Please use use a supported browser such as Mozilla Firefox, Google Chrome,
or Microsoft Edge. Microsoft Internet Explorer is not supported.
No picture or
Verify the HDTV has a QAM (digital cable) tuner. Verify that you have performed a full channel scan on the HDTV with
channel found
“cable mode” selected. Lower the power on the unit, then verify that the modulator is not conflicting with any other
at TV
channel by connecting the unit directly to the HDTV.
Idle Screen
One reason this may happen is when the unit does not detect video input. Verify the source is on and producing a
(bouncing logo)
video signal, then verify the source is outputting a supported resolution.
Image Breakup
Image or video break up is often caused by an issue in the RF/coax network. You may have chosen a channel number
that is not completely vacant.
If you are combining with other modulators, be sure the RF# selected on the unit does not conflict with any other
channels, keep in mind that some analog modulators may spill over to adjacent channels and cause unexpected
interference.
If you are combining with a cable service, keep in mind that they sometimes have extra signals that a TV will not
display and can cause interference.
There may also be an RF power balance issue. Verify that the RF power of the unit is balanced with signals from
other modulators and from the cable company. As a test, try removing all other signals (cable, other modulators, etc)
and see if you still see similar issues.
Some TVs will also show video issues if the signal strength is too high. Try lowering the RF power on the unit to
ensure you are not overdriving the HDTV tuner.
Audio and
If both the audio and video are being sent through the unit to the TV, be sure your firmware is fully updated, later
video are not
versions of firmware may have lip sync corrections.
synchronized
If you are feeding the audio directly from the source into a distributed (whole house) audio system and not through
the ZeeVee unit, it will arrive to the speakers before the video arrives to the HDTV. This happens because the video
is being encoded into a digital signal, modulated by the unit and then demodulated at the HDTV. Each of these steps
adds latency that will not be reflected in the audio because it is traveling a shorter path.
To work around the issue, you can try one of the following:
Use an audio delay device that allows you to add a delay to the audio stream before it reaches the sound system.
Use the Dly Aud port on the card, if available, and adjust the delay amount using Maestro.
Feed the audio to the ZeeVee unit and send it to the HDTV with the video. Then take the audio out from an HDTV
or external QAM tuner (such as the ZvSync) and connect it to your audio system. The audio should have a similar
amount of delay since it has gone through the encoding and decoding process just as the video did.
Page 14 | HDbridge3000 Configuration Guide www.zeevee.com
WARRANTY
HDbridge3000
and ZvPro Product Lines
ZeeVee, Inc. January 1, 2014
LIMITED FIVE YEAR WARRANTY
ZeeVee warrants your ZeeVee Equipment (defined to
include only HDbridge Series and ZvPro Series of
equipment) against defects in materials and
workmanship for a period of five years from the date of
purchase. ZeeVee’s limited warranty extends only to the
original end user purchaser or any person receiving the
ZeeVee Equipment as a gift from the original end user
purchaser and to no other purchaser or transferee. All
warranties implied by law, including any implied
warranties of merchantability and fitness for a particular
purpose, are expressly limited to
the duration of this express limited warranty. Some
countries or states of the U.S. do not allow
limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
EXCLUSIVE REMEDY FOR ZEEVEE EQUIPMENT At
the option of ZeeVee, the ZeeVee Equipment will be
repaired or replaced with a new, repaired or refurbished
product (whichever ZeeVee deems as necessary) if it
becomes defective or inoperative. If ZeeVee cannot
reasonably repair or replace the ZeeVee Equipment
then ZeeVee may, at its sole discretion, refund the
original purchase price or the current retail price of the
ZeeVee Equipment. If ZeeVee chooses to repair or
replace the ZeeVee Equipment, or to refund the
purchase price, this will be the exclusive remedy. With
the exception of any warranties implied by the law of
any country or state of the U.S., this express limited
warranty is exclusive and in lieu of all other warranties,
guarantees, agreements and similar obligations of
ZeeVee.
THE ABOVE WARRANTIES ARE SUBJECT TO
THE FOLLOWING CONDITIONS
• You must have proof of purchase from an
authorized ZeeVee dealer to receive warranty
service. A sales receipt or other document
showing that you purchased the ZeeVee
Equipment is considered proof of purchase.
• Warranty coverage begins the day the original end
user purchaser or any person receiving the ZeeVee
Equipment as a gift from the original end user
purchaser purchased the ZeeVee Equipment.
• All ZeeVee Equipment, including replacement
products, are covered only for the original
warranty period. When the warranty on the original
product expires, the warranty on the replacement
product also expires.
• If we determine that the problem is not covered
under the limited warranty, we will notify you and
inform you of service or replacement alternatives
that are available to you on a fee basis.
• In the case of a paid repair: at the option of
ZeeVee, the ZeeVee Equipment will be repaired
or replaced with a new, repaired, refurbished, or
comparable product (whichever ZeeVee deems
as necessary).
• ZeeVee Equipment must be purchased through
an authorized ZeeVee distribution partner and
dealer/ reseller. Check zeevee.com for a list of
authorized distributors and a list of any expressly
excluded dealer/resellers. ZeeVee does not
warrant equipment purchased through grey
market resellers or certain internet resellers.
WHAT THESE WARRANTIES EXCLUDE
Your warranties do NOT cover:
• Labor charges for installation or set-up of the
ZeeVee Equipment.
• Repairs or replacement due to misuse, accident,
lightning damage, unauthorized repair, power
surges, or other causes not within the control of
ZeeVee.
• Any modifications or other changes to the ZeeVee
Equipment, including but not limited to software or
hardware modification in any way other than as
expressly authorized by ZeeVee, will void these
limited warranties. Except in the case of hardware or
software provided by ZeeVee, installing
modifications, “hacks,” or utilizing service access or
“back doors” will void these limited warranties.
• Reception or transmission problems caused by
signal conditions, Internet connection problems,
or any other communication systems outside the
unit.
• Expendable accessories included in
ZeeVee Equipment such as batteries.
• Any ZeeVee Equipment that has been modified
or adapted to enable it to operate in any country
other than the country for which it was designed,
manufactured, approved, and/or authorized.
• Any ZeeVee Equipment that has altered or
missing serial numbers.
• Any ZeeVee Equipment that has been opened
or otherwise tampered with.
• Problems that are directly caused as a result
of using any third party accessories, parts or
components.
• Shipping, tax or duty charges for return
or replacement of unit.
MATERIALS REQUIRED FOR WARRANTY
Please keep your sales receipt and any other
documentation showing proof of purchase. Also,
keep the original box and packaging material in
case you need to return your ZeeVee Equipment.
TO GET WARRANTY SERVICE
Warranty service will be provided by ZeeVee. If you
believe you need service for your ZeeVee Equipment,
please contact ZeeVee by calling our customer care
center at (877)-4ZeeVee; (877)-493-3833. If it is
determined that the product needs to be returned for
service or exchange, you will receive a Return Material
Authorization (RMA) number. Our agents will help you
through the process through which you can return the
product. ZeeVee is not responsible for customer
products received without an RMA number and may
reject such products.
TO GET OUT-OF-WARRANTY SERVICE
To obtain out-of-warranty service for your ZeeVee
Equipment, please contact ZeeVee by calling our
customer care center at (877)-4ZeeVee; (877)-493-
3833 for information on the possibility of and any costs
for repair or replacement of out-of-warranty products.
No agent, company, dealer, distributor, or person is
authorized to change, modify, or extend the terms of
these warranties in any manner.
LIMITATION OF LIABILITY
In no event will ZeeVee be liable for any amount
greater than the retail price of the ZeeVee Equipment.
ZeeVee shall not be liable for any incidental or
consequential damages (including lost profits) for
breach of any express or implied warranty on the
ZeeVee Equipment. Some countries and states of the
U.S. do not allow the exclusion or limitation of
incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights, which vary from country to
country and state to state.
HDbridge3000 Configuration Guide | Page 15
Contact ZeeVee
Support
For additional questions call
+1(877) 4-ZEEVEE (1.877.493.3833)
or e-mail [email protected].
Representatives are available from 9:00 AM to 6:00 PM, Monday through Friday (Eastern Time).
Sales
North America:
+1 (347) 851-7364 Phone
[email protected]
EMEA:
+44 1494 956677 Phone
[email protected]
NA
Page 16 |
HDbridge3000 Configuration Guide
Proudly designed and built in the USA
HDbridge3000 Rev.
B 2020-02
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

ZeeVee HDBridge 3000 User manual

ZeeVee
Brand
ZeeVee
Model
HDBridge 3000
Category
Supplementary music equipment
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents