Part No: NS1600.3
ARAT display mount for the following systems
for TomTom ONE Europa version
for TomTom ONE XL version
2. TomTom ONE original holder
taken from the original suction mount of your navigation system
(use the supplied screws from this holder)
3. TomTom ONE original holder
place in front of the adapter plate and secure with the screws
for securing
of the original holder
from your Navigation system
supplied screws
Screws 3,5 x 9,5mm (x 4)
onto the rear of the ARAT mount
is secured with
Screws 4,2 x 19mm (x 3)
onto the ARAT car specific mount
ARAT Deutschland - Hotline: 0180-5-895252 (14ct/min) - Fax: 05207-8952-68 - Email:
[email protected] - www.arat.de
ARAT Österreich - Telefon: 0043-4732-37280 - Fax: 0043-4732-372804 - Email:
[email protected] - www.arat.de