Ingersoll-Rand 14/85 User manual

7/120, 9/110, 10/105, 14/85

7/170, 10/125, 14/115

This manual contains

important safety information

and must be made available to

personnel who operate and

maintain this machine.

7/120 9/110

–>SERIAL No : 32000110/105 14/85

C.C.N. : 22191225 GB

DATE : SEPTEMBER 2003

OPERATION AND MAINTENANCE MANUAL

7/170 10/125 14/115

Machine models represented in this manual may be used in various locations world–wide. Machines sold

and shipped into European Union Territories require that the machine display the EC Mark and conform

to various directives. In such cases, the design specification of this machine has been certified as

complying with EC directives. Any modification to any part is absolutely prohibited and would result in

the CE Certification and marking being rendered invalid. A declaration of that conformity follows:

DECLARATION OF CONFORMITY WITH EC DIRECTIVES

We

Declare that, under our sole responsibility for manufacture and supply, the product(s)

98/37/EC, 93/68/EEC, 89/336/EEC

Ingersoll–Rand Company

P.O. Box 868

501 Sanford Avenue

Mocksville, North Carolina 27028

Ingersoll–Rand Company Limited

Swan Lane

Hindley Green

Wigan WN2 4EZ

United Kingdom

Represented in EC by:

to which this declaration relates, is (are) in conformity with the provisions of the above

directives using the following principal standards

Issued at Mocksville on

1–1–2003

Issued at Hindley Green on

1–1–2003

EN29001 : EN292, EN60204–1, EN1012–1, PN8NTC2, EN50081, EN50082

________________________________

7/120 (P425AWIR) 9/110 (XP375AWIR) 10/105 (HP375AWIR)

14/85 (VHP300AWIR)

Harry Seddon

Quality assurance manager

Ric Lunsford

Manager of quality control

CONFORMITY WITH NOISE DIRECTIVE 2000/14/EC

Ingersoll–Rand Company Limited declare that the following Portable Compressors have been

manufactured in conformity with the directive as shown

Machine

Mean

Guaranteed

Directive

Type kW

measured

value

Guaranteed

Level

Notified body

14/85WIR

2000/14/EC

10/105WIR

A V Technology

Annex VI

Part I

9/110WIR

93 100.2 L

WA

101 L

WA

Stockport UK

Nr 1067Part I

7/120WIR

Nr 1067

________________________________

Issued at Mocksville, NC. . . . . . . . .

1st Declaration January 11, 2003. . . .

Ric Lunsford

Manager of quality control

EC Pressure Equipment Directive and Related Regulations

We declare that this product has been assessed according to the Pressure Equipment Directive (97/23/EC)

and, in accordance with the terms of this Directive, has been excluded from the scope of this Directive.

It may carry ”CE” marking in compliance with other applicable EC Directives.

Machine models represented in this manual may be used in various locations world–wide. Machines sold

and shipped into European Union Territories require that the machine display the EC Mark and conform

to various directives. In such cases, the design specification of this machine has been certified as

complying with EC directives. Any modification to any part is absolutely prohibited and would result in

the CE Certification and marking being rendered invalid. A declaration of that conformity follows:

We

Declare that, under our sole responsibility for manufacture and supply, the product(s)

98/37/EC, 93/68/EEC, 89/336/EEC

Ingersoll–Rand Company

P.O. Box 868

501 Sanford Avenue

Mocksville, North Carolina 27028

Ingersoll–Rand Company Limited

Swan Lane

Hindley Green

Wigan WN2 4EZ

United Kingdom

Represented in EC by:

to which this declaration relates, is (are) in conformity with the provisions of the above

directives using the following principal standards

Issued at Mocksville on

1–1–2003

Issued at Hindley Green on

1–1–2003

EN29001 : EN292, EN60204–1, EN1012–1, PN8NTC2, EN50081, EN50082

________________________________

7/170 (P600WIR) 10/125 (HP450WIR) 14/115 (VHP400WIR)

Harry Seddon

Quality assurance manager

Ric Lunsford

Manager of quality control

DECLARATION OF CONFORMITY WITH EC DIRECTIVES

CONFORMITY WITH NOISE DIRECTIVE 2000/14/EC

Ingersoll–Rand Company Limited declare that the following Portable Compressors have been

manufactured in conformity with the directive as shown

Machine

Mean

Guaranteed

Directive

Type kW

measured

value

Guaranteed

Level

Notified body

2000/14/EC

14/115

A V Technology

2000/14/EC

Annex VI

10/125

126.5 100.2 L

WA

101 L

WA

A V Technology

Stockport UK

Part I

7/170

WA WA

Nr 1067

________________________________

Issued at Mocksville, NC. . . . . . . . .

1st Declaration January 11, 2003. . . .

Ric Lunsford

Manager of quality control

EC Pressure Equipment Directive and Related Regulations

We declare that this product has been assessed according to the Pressure Equipment Directive (97/23/EC)

and, in accordance with the terms of this Directive, has been excluded from the scope of this Directive.

It may carry ”CE” marking in compliance with other applicable EC Directives.

1

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

1 CONTENTS

2 FOREWORD

3 WARRANTY

9 DECALS

13 SAFETY

16 GENERAL INFORMATION

Dimensions

Data

21 OPERATING INSTRUCTIONS

Commissioning

Prior to starting

Starting

Stopping

Emergency stopping

Re–starting

Monitoring during operation

Decommissioning

29 ENGINE INSTRUCTION MANUAL

46 MAINTENANCE

Routine maintenance

Lubrication

Speed & pressure regulation

Torque settings table

Compressor lubrication

58 MACHINE SYSTEMS

Electrical system

Piping & instrumentation system

61 SERVICE TOOLS

65 FAULT FINDING

67 OPTIONS

70 PARTS ORDERING

ABBREVIATIONS & SYMBOLS

#### Contact Ingersoll–Rand for serial

number

–>#### Up to Serial No.

####–> From Serial No.

* Not illustrated

† Option

AR As required

D Germany

DK Denmark

E Spain

F France

GB Great Britain

HA High ambient machine

I Italy

N Norway

NL Netherlands

P Portugal

S Sweden

SF Finland

F.H.R.G. Fixed height running gear

V.H.R.G. Variable height running gear

2

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

FOREWORD

The contents of this manual are considered to be proprietary

and confidential to Ingersoll–Rand and should not be

reproduced without the prior written permission of

Ingersoll–Rand.

Nothing contained in this document is intended to extend any

promise, warranty or representation, expressed or implied,

regarding the Ingersoll–Rand products described herein. Any

such warranties or other terms and conditions of sale of

products shall be in accordance with the standard terms and

conditions of sale for such products, which are available upon

request.

This manual contains instructions and technical data to

cover all routine operation and scheduled maintenance tasks by

operation and maintenance staff. Major overhauls are outside

the scope of this manual and should be referred to an authorised

Ingersoll–Rand service department.

The design specification of this machine has been certified

as complying with EC directives. As a result:

(a)Any machine modifications are strictly prohibited, and will

invalidate EC certification.

(b)A unique specification for USA/Canada is adopted and

tailored to the territory.

All components, accessories, pipes and connectors added

to the compressed air system should be:

. of good quality, procured from a reputable manufacturer and,

wherever possible, be of a type approved by Ingersoll–Rand.

. clearly rated for a pressure at least equal to the machine

maximum allowable working pressure.

. compatible with the compressor lubricant/coolant.

. accompanied with instructions for safe installation,

operation and maintenance.

Details of approved equipment are available from

Ingersoll–Rand Service departments.

The use of repair parts / lubricants / fluids other than those

included within the Ingersoll–Rand approved parts list may

create hazardous conditions over which Ingersoll–Rand has no

control. Therefore Ingersoll–Rand cannot be held responsible

for equipment in which non–approved repair parts are installed.

Ingersoll–Rand reserves the right to make changes and

improvements to products without notice and without incurring

any obligation to make such changes or add such

improvements to products sold previously.

The intended uses of this machine are outlined below and

examples of unapproved usage are also given, however

Ingersoll–Rand cannot anticipate every application or work

situation that may arise.

IF IN DOUBT CONSULT SUPERVISION.

This machine has been designed and supplied for use only in

the following specified conditions and applications:

. Compression of normal ambient air containing no known or

detectable additional gases, vapours. or particles

. Operation within the ambient temperature range specified in

the GENERAL INFORMATION section of this manual.

UNITS MANUFACTURED IN NORTH AMERICA: Generation

of electricity at 120V (1ph) at 60 Hertz.

UNITS MANUFACTURED IN EUROPE: Generation of

electricity not applicable.

The use of the machine in any of the situation types

listed in table 1:–

a) Is not approved by Ingersoll–Rand,

b) May impair the safety of users and other persons, and

c) May prejudice any claims made against Ingersoll–Rand.

TABLE 1

Use of the machine to produce compressed air for:

a) direct human consumption

b) indirect human consumption, without suitable filtration and

purity checks.

Use of the machine outside the ambient temperature range

specified in the GENERAL INFORMATION SECTION of this

manual.

This machine is not intended and must not be used in

potentially explosive atmospheres, including situations where

flammable gases or vapours may be present.

Use of the machine fitted with non Ingersoll–Rand approved

components / lubricants / fluids.

Use of the machine with safety or control components

missing or disabled.

Use of the machine for storage or transportation of materials

inside or on the enclosure except when contained within the

toolbox.

GENERATOR

Use of the generator to supply load(s) greater than those

specified.

Use of unsafe or unserviceable electrical equipment

connected to the generator.

Use of electrical equipment:

(a) Having incorrect voltage and/or frequency ratings.

(b) Containing computer equipment and/or similar electronics.

The company accepts no responsibility for errors in

translation of this manual from the original English version.

INGERSOLL–RAND COMPANY

3

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

WARRANTY

Ingersoll–Rand, through its distributor, warrants that each item

of equipment manufactured by it and delivered hereunder to the

initial user will be free of defects in material and workmanship.

With respect to the following types of equipment, the warranty

period enumerated below will apply.

A. Aftercoolers – The earlier of nine (9) months from date

of shipment to or six (6) months from start up by initial user.

B. Portable Compressors, Portable Generator Sets

(GENSET), Portable Light Towers and Air Dyers – The

earlier of twelve (12) months from shipment to or the

accumulation of 2,000 hours of service by the initial user.

C. Portable Compressor Air Ends – The earlier of

twenty–four (24) months from shipment to or the

accumulation of 4,000 hours of service by the initial user.

For Air Ends, the warranty against defects will include

replacement of the complete Air End, provided the original

Air End, is returned assembled and unopened.

C.1 Portable Compressor Airend Limited Optional

Warranty – The earlier of sixty (60) months from shipment

to or the accumulation of 10,000 hours of service. The

optional warranty is limited to defects in rotors, housings,

bearings and gears and provided all the following

conditions are met:

The original airend is returned assembled and unopened.

Continued use of genuine Ingersoll–Rand parts, fluids,

oils and filters.

Maintenance is performed at prescribed intervals.

D. Genset Generators – The earlier of twenty–four (24)

months from shipment to or the accumulation of 4,000

hours of service by the initial user.

E. Portable Light Tower Generators – The earlier of twelve

(12) months from shipment to or the accumulation of 2,000

hours of service by the initial user. Light Source model

only, the earlier of twenty–four (24) months from shipment

to or the accumulation of 4,000 hours of service.

F. Ingersoll–Rand Engines – The earlier of twenty—four

(24) months from shipment to or the accumulation of 4,000

hours of service.

G. Ingersoll–Rand Platinum Drive Train Warranty

(Optional) – Platinum drive train pertains to the

Ingersoll–Rand Engine and Airend combination. The

earlier of sixty (60) months from shipment to, or the

accumulation of 10,000 hours of service. The starter,

alternator, fuel injection system and all electrical

components are excluded from the extended warranty.

The airend seal and drive coupling are included in the

warranty (air–end drive belts are not included). The

optional warranty is automatically available when meeting

the following conditions:

The original airend is returned assembled and unopened.

Continued use of genuine Ingersoll–Rand parts, fluids, oil

and filters.

Maintenance is performed at prescribed intervals.

It is the obligation of the user to provide verification that

these conditions have been satisfied when submitting

warranty claims.

H. Spare Parts – Six (6) months from date of installation

Ingersoll–Rand will provide a new part or repaired part, at its

election, in place of any part which is found upon its inspection

to be defective in material and workmanship during the period

prescribed above. Such part will be repaired or replaced without

charge to the initial user during normal working hours at the

place of business of an Ingersoll–Rand distributor authorized to

sell the type of equipment involved or other establishment

authorized by Ingersoll – Rand. User must present proof of

purchase at the time of exercising warranty.

The above warranty does not apply to failures occurring as a re-

sult of abuse; misuse, negligent repairs, corrosion, erosion and

normal wear and tear, alterations or modifications made to the

product without express written consent of Ingersoll–Rand; or

failure to follow the recommended operating practices and

maintenance procedures as provided in the product’s operating

and maintenance publications.

Accessories or equipment furnished by Ingersoll–Rand, but

manufactured by others, including, but not limited to, engines,

tires, batteries, engine electrical equipment, hydraulic

transmissions, carriers, shall carry whatever warranty the

manufacturers have conveyed to Ingersoll–Rand and which

can be passed on to the initial user.

THIS WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES EXPRESSED OR IMPLIED, (EXCEPT THAT

OF TITLE), AND THERE ARE NO WARRANTIES OF

MERCHANTABILITY OR OF FITNESS FORA PARTICULAR

PURPOSE.

4

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

GENERAL WARRANTY INFORMATION

GENERAL WARRANTY Extended Coverage

Portable Compressor Package 1 year/2000 hrs

Airend 2 yrs/4000 hrs 5 yrs/10,000 hrs

Limited warranty, major compo-

nents (refer to operator’s manual).

Portable Genset 8kW, 11KW,

20KVA thru 575KVA

Package 1 yr/2000 hrs None

Generator 2 yrs/4000 hrs None

Portable Genset 3.5KW thru

7.0KW and 10KW

Package 1 yr/2000 hrs (parts only) None

Generator 1 yrs/2000 hrs (parts only) None

Light Tower Package 1 yr/2000 hrs

Generator 1 yr/2000 hrs 2 years/4000 hours, for Lightsource

introduced 8/16/99.

ENGINES

CATERPILLAR Months Hours Extended Coverage

12 unlimited Available at dealer

CUMMINS 24 2000 Major components 3 yrs/10,000 hrs

Available at dealer

JOHN DEERE (in compressors) 24 2000 5 yrs/5000 hrs using OEM fluids and filters

with $250 deductible

(in generators as of 1/1/01) 24 2000 2 yrs/4000 hrs using IR fluids and filters

DEUTZ 24 2000 Available at dealer

INGERSOLL–RAND 24 4000 5 yrs/10,000 hrs when using genuine Inger-

soll–Rand fluids and parts. Refer to operator’s

manual.

KUBOTA (North America only) 24 2000 Major components 36 mo/3000 hrs (parts only)

(Western Europe & Oceania) 24 2000 None

(Central & South America, Asia, Middle East &

Africa)

12 1000 None

MITSUBISHI 24 2000 2 yrs/4000 hrs using IR fluids and filters

VOLVO 24 2000 2 yrs/4000 hrs using IR fluids and filters

HONDA 12 unlimited None

VANGUARD 24 unlimited None

5

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

PARTS

Months Hours Coverage

Ingersoll–Rand

6 No Limit Parts Only

AIREND EXCHANGE

Months Hours Extended Coverage

Airend

12 2000 2 yrs/4000 hrs – available from

IR.

Note: Actual warranty times may change. Consult the manufacturer’s warranty policy as shipped with

each new product.

6

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

Extended Limited Airend Warranty

Ingersoll–Rand Portable Compressor Division is pleased to announce the availability of extended limited airend warranty.

Announcement of the extended warranty coincides with the introduction of Pro–Te c  Compressor Fluid. Pro–Te c  Compressor Fluid

is an amber coloured fluid specially formulated for Portable Compressors and is being provided as the factory filled fluid for all machines

except

1

XHP650/900/1070

All machines have the standard airend warranty, – The earlier of 24 months from shipment to, or the accumulation of 4000 hours of

service by the initial user.

The warranty against defects will include replacement of the complete Airend, provided the original Airend is returned assembled and

unopened.

The optional limited warranty is the earlier of 60 months from shipment to, or the accumulation of 10,000 hours of service. The optional

warranty is limited to defects in major components (rotors, housings, gears and bearings), and is automatically available when the

following conditions are met:

1. The original airend is returned assembled and unopened.

2. Submissions of proof that Ingersoll–Rand fluid, filters and separators have been used. Refer to the Operation and Parts manual for

the correct fluids, filters and separator elements required.

3. Submissions of proof that maintenance intervals have been followed.

WARRANTY TIME *BARE AIREND **AIREND COMPONENTS

STANDARD 2YRS / 4,000HRS 100% PARTS & LABOUR 100% PARTS & LABOUR

OPTIONAL 5YRS / 10,000HRS 100% PARTS & LABOUR 0%

*BARE AIREND – pertains to major airend parts (rotors, housings, gears and bearings).

**AIREND COMPONENTS – pertains to auxiliary attachments to the bare airend (seals, pumps, valves, tubes, hoses, fittings and filter

housing).

Pro–Tec and XHP505 Compressor Fluids are available from your local Ingersoll–Rand branch or distributor.

For units operating within the USA & Canada, call the Mocksville Product Support Department on 1–800–633–5206

1

XHP650/900/1070 will continue to use XHP505 and will have the extended warranty when above conditions are met.

7

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

WARRANTY REGISTRATION

FOR UNITS SOURCED FROM HINDLEY GREEN, UK

Complete Machine Registration

To initiate the machine warranty, fill out the ”Warranty Registration” form 83242 11/99 supplied as part of the machine documentation,

keep a copy for your records and mail the original to:

Ingersoll Rand European Sales Ltd

Portable Power Business

Swan Lane

Hindley Green

Wigan

Lancashire

WN2 4EZ

U.K.

Attn: Customer Service Department

Note: Completion of this form validates the warranty.

Engine Registration:

I–R powered machines do not require separate engine registration.

Deutz require a separate engine registration form to be completed and mailed direct to their Cologne office. The form is supplied as part

of the machine documentation for Deutz powered machines.

Caterpillar, Cummins and Perkins do not require a separate registration form but they stipulate that any new engine should be registered

with their local dealer to initiate warranty.

You MUST provide proof of the “in–service” date when requesting engine warranty repairs.

8

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

Selling Distributor Servicing Distributor

WARRANTY REGISTRATION

Name Name Owner/User Name

Address Address Address

City City City

County County County

State State State

Zip code Zip code Zip code

Telephone Telephone Telephone

Complete the Applicable Blocks

Owner/User Type of Business (check one only)

Construction–Heavy

(highway, excavation, etc.)

Asphalt Contractor Coal Mining Other Mining

Construction–Light

(carpentry, plumbing, pools,

mason, etc.)

Government

(municipal, state,

county, etc.)

Quarry Shallow Oil &

Gas

Rental (rental center, rental

fleet, etc.)

Building Contractor Water well Utility

Company

(gas, electric,

water, etc.)

Industrial

(plant use)

Other

specify

Exploration Utility

Contractor

Model S/N Unit S/N Engine S/N Date delivered

Unit–Hours Airend S/N Truck S/N Truck Engine S/N

SERVICING DISTRIBUTOR / USER ACKNOWLEDGEMENT

1. The Purchaser has been instructed and/or has read the manual and understands proper preventative

maintenance, general operation and safety precautions.

2. The warranty and limitation of liability has been reviewed and understood by the owner/user.

3. In the event that this unit is to be used within a nuclear facility, the owner/user shall notify

Ingersoll–Rand of such use so that Ingersoll–Rand may arrange for appropriate nuclear liability

protection from the owner–licensee of the facility.

4. Ingersoll–Rand reserves the right to make design changes or modifications of Ingersoll–Rand products

at anytime without incurring any obligation to make similar changes or modifications on previously sold

units.

9

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

DECALS

Look for these signs on machines manufactured in Europe, which point out potential hazards to

the safety of you and others. Read and understand thoroughly. Heed warnings and follow

instructions. If you do not understand, inform you supervisor.

GRAPHIC FORM AND MEANING OF ISO SYMBOLS

Prohibition / Mandatory Information / Instructions Warning

WARNING: Electrical shock risk. WARNING – Pressurised component or

system.

WARNING – Hot surface.

WARNING – Pressure control. WARNING – Corrosion risk.

WARNING – Air/gas flow or Air

discharge.

X,XBAR

WARNING – Pressurised vessel.

WARNING – Hot and harmful exhaust

gas.

WARNING – Maintain correct tyre

pressure. (Refer to the GENERAL

INFORMATION section of this manual).

10

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

0C

WARNING – Flammable liquid.

WARNING – Before connecting the tow

bar or commencing to tow consult the

operation and maintenance manual.

WARNING – For operating temperature

below 0C, consult the operation and

maintenance manual.

WARNING – Do not undertake any

maintenance on this machine until the

electrical supply is disconnected and

the air pressure is totally relieved.

WARNING – Consult the operation and

maintenance manual before

commencing any maintenance.

Do not breathe the compressed air from

this machine.

Do not remove the Operating and

Maintenance manual and manual holder

from this machine.

Do not stack.

Do not operate the machine without the

guard being fitted.

11

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

Do not stand on any service valve or other

parts of the pressure system.

Do not operate with the doors or enclosure

open.

Do not use fork lift truck from this side.

XX

km/h

Do not exceed the trailer speed limit. No naked lights.

Do not open the service valve before the

airhose is attached.

Use fork lift truck from this side only. Emergency stop. Tie down point

Lifting point. On (power). Off (power).

Read the Operation and Maintenance

manual before operation or maintenance

of this machine is undertaken.

When parking use prop stand, handrake

and wheel chocks.

Compressor oil filling

Diesel fuel

No open flame.

Parking brake.

Rough Service Designation.

Wet Location Operation.

12

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

Replace any cracked protective shield.

Oil drain. Engine Oil

Fuel level/point Pressure control Malfunction

Battery charging condition Low pressure High pressure

Engine malfunction

High compressor temperature

Compressor malfunction

Low engine oil pressure

Engine high temperature

13

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

SAFETY

WARNINGS

Warnings call attention to instructions which must be

followed precisely to avoid injury or death.

CAUTIONS

Cautions call attention to instructions which must be

followed precisely to avoid damaging the product, process or its

surroundings.

NOTES

Notes are used for supplementary information.

General Information

Never operate unit without first observing all safety warnings

and carefully reading the operation and maintenance manual

shipped from the factory with this machine.

Ensure that the operator reads and understands the decals

and consults the manuals before maintenance or operation.

Ensure that the Operation and Maintenance manual, and the

manual holder, are not removed permanently from the machine.

Ensure that maintenance personnel are adequately trained,

competent and have read the Maintenance Manuals.

Make sure that all protective covers are in place and that the

canopy/doors are closed during operation.

The specification of this machine is such that the machine is

not suitable for use in flammable gas risk areas. If such an

application is required then all local regulations, codes of

practice and site rules must be observed. To ensure that the

machine can operate in a safe and reliable manner, additional

equipment such as gas detection, exhaust spark arrestors, and

intake (shut–off) valves may be required, dependant on local

regulations or the degree of risk involved.

A weekly visual check must be made on all fasteners/fixing

screws securing mechanical parts. In particular, safety–related

parts such as coupling hitch, drawbar components,

road–wheels, and lifting bail should be checked for total

security.

All components which are loose, damaged or unserviceable,

must be rectified without delay.

Air discharged from this machine may contain carbon

monoxide or other contaminants which will cause serious injury

or death. Do not breathe this air.

This machine produces loud noise with the doors open or

service valve vented. Extended exposure to loud noise can

cause hearing loss. Always wear hearing protection when doors

are open or service valve is vented.

Never inspect or service unit without first disconnecting

battery cable(s) to prevent accidental starting.

Do not use petroleum products (solvents or fuels) under high

pressure as this can penetrate the skin and result in serious

illness. wear eye protection while cleaning unit with compressed

air to prevent debris from injuring eye(s).

Rotating fan blade can cause serious injury. Do not operate

without guard in place.

Use care to avoid contacting hot surfaces (engine exhaust

manifold and piping, air receiver and air discharge piping, etc.).

Ether is an extremely volatile, highly inflammable gas. When

it is specified as a starting aid, use sparingly. DO NOT USE

ETHER IF THE MACHINE HAS GLOW PLUGS OR INLET

HEATER STARTING AIDS OR ENGINE DAMAGE WILL

RESULT.

Never operate unit with guards, covers or screens removed.

Keep hands, hair, clothing, tools, blow gun tips, etc. well away

from moving parts.

Compressed air

Compressed air can be dangerous if incorrectly handled.

Before doing any work on the unit, ensure that all pressure is

vented from the system and that the machine cannot be started

accidentally.

Ensure that the machine is operating at the rated pressure

and that the rated pressure is known to all relevant personnel.

All air pressure equipment installed in or connected to the

machine must have safe working pressure ratings of at least the

machine rated pressure.

If more than one compressor is connected to one common

downstream plant, effective check valves and isolation valves

must be fitted and controlled by work procedures, so that one

machine cannot accidently be pressurised / over pressurised by

another.

Compressed air must not be used for a direct feed to any

form of breathing apparatus or mask.

High Pressure Air can cause serious injury or death. Relieve

pressure before removing filler plugs/caps, fittings or covers.

Air pressure can remain trapped in air supply line which can

result in serious injury or death. Always carefully vent air supply

line at tool or vent valve before performing any service.

The discharged air contains a very small percentage of

compressor lubricating oil and care should be taken to ensure

that downstream equipment is compatible.

If the discharged air is to be ultimately released into a

confined space, adequate ventilation must be provided.

When using compressed air always use appropriate

personal protective equipment.

All pressure containing parts, especially flexible hoses and

their couplings, must be regularly inspected, be free from

defects and be replaced according to the Manual instructions.

Avoid bodily contact with compressed air.

The safety valve located in the separator tank must be

checked periodically for correct operation.

14

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

Whenever the machine is stopped, air will flow back into the

compressor system from devices or systems downstream of

the machine unless the service valve is closed. Install a check

valve at the machine service valve to prevent reverse flow in the

event of an unexpected shutdown when the service valve is

open.

Disconnected air hoses whip and can cause serious injury

or death. Always attach a safety flow restrictor to each hose at

the source of supply or branch line in accordance with OSHA

Regulation 29CFR Section 1926.302(b).

Never allow the unit to sit stopped with pressure in the

receiver–separator system.

Materials

The following substances may be produced during the

operation of this machine:

. brake lining dust

. engine exhaust fumes

AVOID INHALATION

Ensure that adequate ventilation of the cooling system and

exhaust gases is maintained at all times.

The following substances are used in the manufacture of this

machine and may be hazardous to health if used incorrectly:

. anti–freeze

. compressor lubricant

. engine lubricant

. preservative grease

. rust preventative

. diesel fuel

. battery electrolyte

AVOID INGESTION, SKIN CONTACT AND INHALATION OF

FUMES

Should compressor lubricant come into contact with the

eyes, then irrigate with water for at least 5 minutes.

Should compressor lubricant come into contact with the

skin, then wash off immediately.

Consult a physician if large amounts of compressor lubricant

are ingested.

Consult a physician if compressor lubricant is inhaled.

Never give fluids or induce vomiting if the patient is

unconscious or having convulsions.

Safety data sheets for compressor and engine lubricants

should be obtained from the lubricant supplier.

Never operate the engine of this machine inside a building

without adequate ventilation. Avoid breathing exhaust fumes

when working on or near the machine.

This machine may include such materials as oil, diesel fuel,

antifreeze, brake fluid, oil/air filters and batteries which may

require proper disposal when performing maintenance and

service tasks. Contact local authorities for proper disposal of

these materials.

Battery

A battery contains sulphuric acid and can give off gases

which are corrosive and potentially explosive. Avoid contact

with skin, eyes and clothing. In case of contact, flush area

immediately with water.

DO NOT ATTEMPT TO SLAVE START A FROZEN BATTERY

SINCE THIS MAY CAUSE IT TO EXPLODE.

Exercise extreme caution when using booster battery. To

jump battery, connect ends of one booster cable to the positive

(+) terminal of each battery. Connect one end of other cable to

the negative (–) terminal of the booster battery and other end to

a ground connection away from dead battery (to avoid a spark

occurring near any explosive gases that may be present). After

starting unit, always disconnect cables in reverse order.

Radiator

Hot engine coolant and steam can cause injury. Ensure that

the radiator filler cap is removed with due care and attention.

Do not remove the pressure cap from a HOT radiator. Allow

radiator to cool down before removing pressure cap.

Transport

When loading or transporting machines ensure that the

specified lifting and tie down points are used.

When loading or transporting machines ensure that the

towing vehicle, its size, weight, towing hitch and electrical

supply are all suitable to provide safe and stable towing at

speeds either, up to the legal maximum for the country in which

it is being towed or, as specified for the machine model if lower

than the legal maximum.

Ensure that the maximum trailer weight does not exceed the

maximum gross weight of the machine (by limiting the

equipment load), limited by the capacity of the running gear.

Note:

Gross mass (on data plate) is for the basic machine and fuel

only, excluding any fitted options, tools, equipment and foreign

materials.

Before towing the machine, ensure that:–

. the tyres and towing hitch are in a serviceable condition.

. the canopy is secure.

. all ancillary equipment is stored in a safe and secure manner.

. the brakes and lights are functioning correctly and meet

necessary

road traffic requirements.

. break-away cables/safety chains are connected to the

towing

vehicle.

The machine must be towed in a level attitude in order to

maintain correct handling, braking and lighting functions. This

can be achieved by correct selection and adjustment of the

vehicle towing hitch and, on variable height running gear,

adjustment of the drawbar.

To ensure full braking efficiency, the front (towing eye)

section must always be set level.

When adjusting variable height running gear:–

15

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

Ensure front (towing eye) section is set level

When raising towing eye, set rear joint first, then front joint.

When lowering towing eye, set front joint first, then rear joint.

After setting, fully tighten each joint by hand and then tighten fur-

ther to the next pin. Refit the pin.

When parking always use the handbrake and, if necessary,

suitable wheel chocks.

Make sure wheels, tyres and tow bar connectors are in safe

operating condition and tow bar is properly connected before

towing.

Safety chains / connections and their adjustment

The legal requirements for the joint operation of the

breakaway cable and safety chains are as yet unidentified by

71/320/EEC or UK regulations. Consequently we offer the

following advice / instructions.

Where brakes only are fitted:

a) Ensure that the breakaway cable is securely coupled to the

handbrake lever and also to a substantial point on the towing

vehicle.

b) Ensure that the effective cable length is as short as possible,

whilst still allowing enough slackness for the trailer to articulate

without the handbrake being applied.

Where brakes and safety chains are fitted:

a) Loop the chains onto the towing vehicle using the towing

vehicle hitch as an anchorage point, or any other point of similar

strength.

b) Ensure that the effective chain length is as short as possible

whilst still allowing normal articulation of the trailer and effective

operation of the breakaway cable.

Where safety chains only are fitted:

a) Loop the chains onto the towing vehicle using the towing

vehicle hitch as an anchorage point, or any other point of similar

strength.

b) When adjusting the safety chains there should be sufficient

free length in the chains to allow normal articulation, whilst also

being short enough to prevent the towbar from touching the

ground in the event of an accidental separation of the towing

vehicle from the trailer.

16

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

MANUFACTURED IN EUROPE

FRONT VIEW

SIDE VIEW

REAR VIEW

TOP VIEW

7/120 9/110 10/105 14/85

P425AWIR XP375AWIR HP375AWIR

VHP300AWIR

All dimensions in inches(mm)

A Instrument panel access door

B Package air inlet

C Access items:

Separator element & fill

Compressor oil filter

Fuel filters

Dipstick

Engine oil fill

Coolant bottle fill

D Access items:

Fuel fill

Engine oil filter

Fuel filter

Engine and compressor air filter

E Access items:

Radiator fill

F Package air outlet

G Track width

H Variable height drawbar

162 (4114) minimum / 168 (4277) maximum

J Variable height drawbar

17 (420) minimum / 35 (880) maximum

17

7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),

7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)

MANUFACTURED IN EUROPE

FRONT VIEW

SIDE VIEW

REAR VIEW

TOP VIEW

7/170 10/125 14/115

P600WIR HP450WIR VHP400WIR

All dimensions in inches(mm)

A Instrument panel access door

B Package air inlet

C Access items:

Separator element & fill

Compressor oil filter

Fuel filters

Dipstick

Engine oil fill

Coolant bottle fill

D Access items:

Fuel fill

Engine oil filter

Fuel filter

Engine and compressor air filter

E Access items:

Radiator fill

F Package air outlet

G Track width

H Variable height drawbar

184.29 (4681) minimum / 189.21 (4806) maximum

J Variable height drawbar

18.98 (482) minimum / 37.17 (944) maximum

Page is loading ...

Ingersoll-Rand 14/85 User manual

Ingersoll-Rand 14/85 User manual

Related papers

Other documents