KYOCERA CS-1820 Specification

Category
Copiers
Type
Specification

This manual is also suitable for

Operation Guide
KM-1820
FS-1118MFP (Eur)
The KM-1820 model is applicable to USA, Canada, and the Asia
Pacific region.
The FS-1118MFP model is applicable to Europe and Australasia.
OPERATION GUIDE i
Making Full Use of This Machine’s Advanced Functions
1 Enlarging/reducing copies to
a desired size between 50 %
and 200 % Zoom mode
(Refer to page 4-4)
2 Copying at a previously
registered zoom ratio
Standard Zoom mode
(Refer to page 4-4)
3 Making clear reproductions
of photographs Image
quality selection (Refer to
page 4-1)
4 Saving on toner use
EcoPrint mode (Refer to the
Advanced Operation Guide.)
5 Making one copy from either
two or four originals
Combine modes (Refer to
the Advanced Operation
Guide.)
6 Collating automatically
Collate mode (Refer to page
4-6)
7 Interrupting the current job
using Print Override mode
(Refer to page 4-7)
8 Sending scanned data by e-
mail (Refer to page 4-9)
9 Making full-color scans
(Refer to page 4-13)
10 Loading an image from
TWAIN (Refer to page 4-13)
11 Storing address information
Address Book (Refer to the
Advanced Operation Guide)
12 Managing the number of
scans and prints by Job
Account (Refer to the
Advanced Operation Guide)
50 %
200 %
6
5
4
3
2
1
AABC
ii OPERATION GUIDE
13 Changing the operational
environment by each
individual user User Login
(Refer to the Advanced
Operation Guide)
14 A full range of optional
equipment is available
Document Processor (Refer
to the Advanced Operation
Guide)
Paper Feeder (Refer to the
Advanced Operation Guide)
Expansion Memory (Refer to
the Advanced Operation
Guide)
FAX System (Refer to the
Advanced Operation Guide)
OPERATION GUIDE iii
Contents
Legal and Safety
1 Machine Parts
Main Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Message Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
2 Loading Paper
Loading Paper Into a Cassette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Adjusting the Paper Stopper for Folio or Oficio II Size Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Loading Paper on the MP Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Using the Face-up Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
3 Preparations
Connecting the Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Connecting the Network Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Connecting the Parallel or USB Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Turning the Machine On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Accessing Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Registering the IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Registering the Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Registering the Default Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Date and Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Setting the Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Summer Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Setting the Current Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Default Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Character Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Keys Used for Entering Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Available Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
List of Character Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Entering Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Selecting Message Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Other Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
4 Basic Operation
Basic Copying Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Canceling Copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Zoom Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Standard Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Variable Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Collate Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Print Override Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Low Power Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Auto Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Basic Scanning Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Scan to E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
iv OPERATION GUIDE
Scan to Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Recipient Selection from One-Touch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Scan with TWAIN Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Selecting Color Scan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Basic Printing Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Installing the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Printing from Application Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
5 Maintenance
Cleaning the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Toner Container Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Online Help Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Replacing Toner Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Cleaning the Charger and the Registration Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Reinstalling the Transport Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
6 Troubleshooting
General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Maintenance and Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Paper Jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Jam Location Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Online Help Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
MP Tray and Inside Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Face-up Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Optional Document Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
7 Specifications
Main Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Copying Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Printing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Scanning Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Document Processor (Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Paper Feeder (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
INDEX
OPERATION GUIDE v
Legal and Safety
CAUTION: No liability is assumed for any damage caused by improper installation.
Notice
The information in this guide is subject to change without notification. Additional
pages may be inserted in future editions. The user is asked to excuse any technical
inaccuracies or typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is following the
instructions in this manual. No responsibility is assumed for defects in the printer’s
firmware (contents of its read-only memory).
This guide, any copyrightable subject matter sold or provided with or in connection
with the sale of the machine, are protected by copyright. All rights are reserved the
prior written consent of Kyocera Mita Corporation is prohibited. Any copies made of
all or part of this manual, any copyrightable subject must contain the same copyright
notice as the material from which the copying is done.
Regarding Tradenames
PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL and KIR
(Kyocera Image Refinement) are trademarks of Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter X24E is a product of
International Business Machines Corporation. Epson LQ-850 is a product of Seiko
Epson Corporation. Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of Centronics Data
Computer Corp. PostScript is a registered trademark of Adobe Systems
Incorporated. Macintosh is a registered trademark of Apple computer, Inc. Microsoft,
Windows, and Windows NT are registered trademarks of Microsoft Corporation.
PowerPC is a trademark of International Business Machines Corporation. ENERGY
STAR is a U.S. registered mark. All other brand and product names are registered
trademarks or trademarks of their respective companies.
The Kyocera product uses PeerlessPrintXL to provide the HP LaserJet compatible
PCL6 language emulation. PeerlessPrintXL is a trademark of the Peerless Systems
Corporation, 2381 Rosecrans Ave. El Segundo, CA 90245, U.S.A.
This product contains UFST
and MicroType
®
from Agfa Monotype
Corporation.
GPL
This product contains GPL (www.fsf.org/copyleft/gpl.html) software as part of its
firmware. For further information including availability of the source code, visit
www.kyoceramita.com/gpl.
Legal and Safety
vi OPERATION GUIDE
Legal Restriction On Copying
It may be prohibited to copy copyrighted material without permission of the copyright
owner.
It is prohibited under any circumstances to copy domestic or foreign currencies.
Copying other items may be prohibited.
USB
This product has been certified by the USB Implementers Forum, Inc.
Agfa Japan License Agreement
1 “Software” shall mean the digitally encoded, machine readable, scalable
outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce
and display weights, styles and versions of letters, numerals, characters and
symbols (“Typefaces”) solely for your own customary business or personal
purposes at the address stated on the registration card you return to Agfa
Japan. Under the terms of this License Agreement, you have the right to use
the Fonts on up to three printers. If you need to have access to the fonts on
more than three printers, you need to acquire a multi-user license agreement
which can be obtained from Agfa Japan. Agfa Japan retains all rights, title and
interest to the Software and Typefaces and no rights are granted to you other
than a License to use the Software on the terms expressly set forth in this
Agreement.
3 To protect proprietary rights of Agfa Japan, you agree to maintain the Software
and other proprietary information concerning the Typefaces in strict confidence
and to establish reasonable procedures regulating access to and use of the
Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you
may make one backup copy. You agree that any such copy shall contain the
same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces,
unless sooner terminated. This License may be terminated by Agfa Japan if
you fail to comply with the terms of this License and such failure is not
remedied within thirty (30) days after notice from Agfa Japan. When this
License expires or is terminated, you shall either return to Agfa Japan or
destroy all copies of the Software and Typefaces and documentation as
requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse
engineer or decompile the Software.
7 Agfa Japan warrants that for ninety (90) days after delivery, the Software will
perform in accordance with Agfa Japan-published specifications, and the
diskette will be free from defects in material and workmanship. Agfa Japan
does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including
warranties of fitness for a particular purpose and merchantability, are excluded.
Legal and Safety
OPERATION GUIDE vii
8 Your exclusive remedy and the sole liability of Agfa Japan in connection with
the Software and Typefaces is repair or replacement of defective parts, upon
their return to Agfa Japan.
In no event will Agfa Japan be liable for lost profits, lost data, or any other
incidental or consequential damages, or any damages caused by abuse or
misapplication of the Software and Typefaces.
9 New York, U.S.A. law governs this Agreement.
10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or
Typefaces without the prior written consent of Agfa Japan.
11 Use, duplication or disclosure by the Government is subject to restrictions as
set forth in the Rights in Technical Data and Computer Software clause at FAR
252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate.
Further use, duplication or disclosure is subject to restrictions applicable to
restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree
to be bound by its terms and conditions. Neither party shall be bound by any
statement or representation not contained in this Agreement. No change in this
Agreement is effective unless written and signed by properly authorized
representatives of each party. By opening this diskette package, you agree to
accept the terms and conditions of this Agreement.
Energy Star Program
We have determined as a participating company in the International Energy Star
Program that this product is compliant with the standards laid out in the International
Energy Star Program.
The International Energy Star Program has as its basic goals the promotion of
efficient energy use and the reduction of the environmental pollution that
accompanies energy consumption by promoting the manufacture and sale of
products that fulfill program standards.
International Energy Star Program standards require that multifunction devices
come equipped with a Low Power Mode where printer and fax functions remain in a
waiting state but energy consumption is still reduced after a certain amount of time
elapses since the device was last used, as well as a Sleep Mode where printer and
fax functions remain in a waiting state but power consumption is still reduced to a
minimum when there is no activity with the device within a set amount of time. This
product is equipped with the following features as a result of its compliance with
International Energy Star Program standards.
Low Power Mode
The device automatically enters low power mode when 5 minutes have passed since
the device was last used. The amount of time of no activity that must pass before
Low Power Mode is activated may be lengthened. For further information refer to
Low Power Mode on page 4-8.
Auto Sleep
The device automatically enters Sleep Mode when 30 minutes have passed since
the device was last used. The amount of time of no activity that must pass before
Sleep Mode is activated may be lengthened. For further information refer to Auto
Sleep on page 4-8.
Legal and Safety
viii OPERATION GUIDE
Paper Recycling
The Energy Star Program encourages the use of environmentally friendly recycled
paper. Your sales or service representative can provide information about
recommended paper types.
Please read this Operation Guide before using the machine. Keep it close
to the machine for easy reference.
The sections of this guide and parts of the machine marked with symbols are safety
warnings meant to protect the user, other individuals and surrounding objects, and
ensure correct and safe usage of the machine. The symbols and their meanings are
indicated below.
Symbols
The following symbols indicate that the related section includes safety warnings.
Specific points of attention are indicated inside the symbol.
The following symbols indicate that the related section includes information on
prohibited actions. Specifics of the prohibited action are indicated inside the symbol.
DANGER: Indicates that serious injury or even death will very possibly
result from insufficient attention to or incorrect compliance with the
related points.
WARNING: Indicates that serious injury or even death may result from
insufficient attention to or incorrect compliance with the related points.
CAUTION: Indicates that personal injury or mechanical damage may
result from insufficient attention to or incorrect compliance with the
related points.
.... [General warning]
.... [Warning of danger of electrical shock]
.... [Warning of high temperature]
.... [Warning of prohibited action]
.... [Disassembly prohibited]
Legal and Safety
OPERATION GUIDE ix
The following symbols indicate that the related section includes information on
actions which must be performed. Specifics of the required action are indicated
inside the symbol.
Please contact your service representative to order a replacement if the safety
warnings in this Operation Guide are illegible or if the guide itself is missing. (fee
required)
.... [Alert of required action]
.... [Remove the power plug from the outlet]
.... [Always connect the machine to an outlet with a ground connection]
Legal and Safety
x OPERATION GUIDE
IMPORTANT - PLEASE READ FIRST.
CAUTION LABELS
Caution labels have been attached to the machine at the following locations for
safety purposes.
Be sufficiently careful to avoid fire or electric shock when removing a paper jam or
when replacing toner.
NOTE: Do not remove these labels.
Label 1
High temperature inside.
Do not touch parts in this area, because
there is a danger of getting burned. ...........
Label 2
High temperature inside.
Do not touch parts in this area, because
there is a danger of getting burned. ...........
Legal and Safety
OPERATION GUIDE xi
Installation Precautions
Environment
CAUTION:
Avoid placing the machine on or in locations which are unstable or not
level. Such locations may cause the machine to fall down or fall over. This
type of situation presents a danger of personal injury or damage to the
machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become
attached to the power plug, clean the plug to avoid the danger of fire or
electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or locations
near flammable items, to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and
maintenance, allow access space as shown below. Leave adequate
space, especially around the vents, to allow air to be properly ventilated
out of the machine.
Other Precautions
Adverse environmental conditions may affect the safe operation and performance of
the machine. Install in an air-conditioned room (recommended room temperature:
around 73.4 °F (23 °C), humidity: around 60 %RH), and avoid the following locations
when selecting a site for the machine.
Avoid locations near a window or with exposure to direct sunlight.
Avoid locations with vibrations.
Avoid locations with drastic temperature fluctuations.
Avoid locations with direct exposure to hot or cold air.
Avoid poorly ventilated locations.
Left:
11
13/16"
30 cm
Front:
39
3/8"
100 cm
Right:
11
13/16"
30 cm
Rear:
11
13/16"
30 cm
Legal and Safety
xii OPERATION GUIDE
During copying, some ozone is released, but the amount does not cause any ill effect
to one's health. If, however, the machine is used over a long period of time in a poorly
ventilated room or when making an extremely large number of copies, the smell may
become unpleasant. To maintain the appropriate environment for copy work, it is
suggested that the room be properly ventilated.
Power Supply/Grounding the Machine
WARNING:
Do not use a power supply with a voltage other than that specified. Avoid
multiple connections in the same outlet. These types of situations present
a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects come in
contact with the prongs on the plug, it may cause a fire or electric shock.
Always connect the machine to an outlet with a ground connection to avoid
the danger of fire or electrical shock in case of an electric short. If an earth
connection is not possible, contact your service representative.
Other Precautions
Connect the power plug to the closest outlet possible to the machine.
The power supply cord is used as the main disconnect device. Ensure that the
socket/outlet is located/installed near the equipment and is easily accessible.
Handling of Plastic Bags
WARNING:
Keep the plastic bags that are used with the machine away from children.
The plastic may cling to their nose and mouth causing suffocation.
Legal and Safety
OPERATION GUIDE xiii
Precautions for Use
Cautions when Using the Machine
WARNING:
Do not place metallic objects or containers with water (flower vases, flower
pots, cups, etc.) on or near the machine. This situation presents a danger
of fire or electrical shock should they fall inside.
Do not remove any of the covers from the machine as there is a danger of
electrical shock from high voltage parts inside the machine.
Do not damage, break or attempt to repair the power cord. Do not place
heavy objects on the cord, pull it, bend it unnecessarily or cause any other
type of damage.
These types of situations present a danger of fire or electrical shock.
Never attempt to repair or disassemble the machine or its parts as there is
a danger of fire, electrical shock or damage to the laser. If the laser beam
escapes, there is a danger of it causing blindness.
If the machine becomes excessively hot, smoke appears from the
machine, there is an odd smell, or any other abnormal situation occurs,
there is a danger of fire or electrical shock. Turn the power switch off (O)
immediately, be absolutely certain to remove the power plug from the
outlet and then contact your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into the
machine, turn the power switch off (O) immediately. Next, be absolutely
certain to remove the power plug from the outlet to avoid the danger of fire
or electrical shock. Then contact your service representative.
Do not remove or connect the power plug with wet hands, as there is a
danger of electrical shock.
Always contact your service representative for maintenance or repair of
internal parts.
Legal and Safety
xiv OPERATION GUIDE
CAUTION
Do not pull the power cord when removing it from the outlet. If the power cord is
pulled, the wires may become broken and there is a danger of fire or electrical shock.
(Always grasp the power plug when removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the machine.
If the power cord is damaged, there is a danger of fire or electrical shock.
If the machine will not be used for a short period of time (overnight, etc.),
turn the power switch off (O). If it will not be used for an extended period of
time (vacations, etc.), remove the power plug from the outlet for safety
purposes during the time the machine is not in use.
Always hold the designated parts when lifting or moving the machine.
For safety purposes, always remove the power plug from the outlet when
performing cleaning operations.
If dust accumulates within the machine, there is a danger of fire or other
trouble. It is therefore recommended that you consult with your service
representative in regard to cleaning of internal parts. This is particularly
effective if accomplished prior to seasons of high humidity. Consult with
your service representative in regard to the cost of cleaning the internal
parts of the machine.
Other Precautions
Do not place heavy objects on the machine or cause other damage to the machine.
Do not open the upper front cover, turn off the power switch, or pull out the power
plug during copying.
When lifting or moving the machine, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They
could be damaged by static electricity.
Do not attempt to perform any operations not explained in this handbook.
For Users in California, the United States
This product contains a CR Coin Lithium Battery which contains Perchlorate Material
- special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
.
Legal and Safety
OPERATION GUIDE xv
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Do not look directly at the light from the scanning lamp as it may cause your eyes to
feel tired or painful.
Cautions when Handling Consumables
CAUTION
Do not attempt to incinerate the Toner Container. Dangerous sparks may
cause burns.
Keep the Toner Container out of the reach of children.
If toner happens to spill from the Toner Container, avoid inhalation and
ingestion, as well as contact with your eyes and skin.
If you do happen to inhale toner, move to a place with fresh air and
gargle thoroughly with a large amount of water. If coughing develops,
contact a physician.
If you do happen to ingest toner, rinse your mouth out with water and drink 1 or
2 cups of water to dilute the contents of your stomach. If necessary, contact a
physician.
If you do happen to get toner in your eyes, flush them thoroughly with water. If
there is any remaining tenderness, contact a physician.
If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the Toner Container.
Other Precautions
After use, always dispose of the Toner Container in accordance with Federal, State
and Local rules and regulations.
Store all consumables in a cool, dark location.
If the machine will not be used for an extended period of time, remove the paper from
the cassette, return it to its original package and reseal it.
Legal and Safety
xvi OPERATION GUIDE
Laser Safety (Europe)
Laser radiation could be hazardous to the human body. For this reason, laser
radiation emitted inside this machine is hermetically sealed within the protective
housing and external cover. In the normal operation of the product by user, no
radiation can leak from the machine.
This machine is classified as Class 1 laser product under IEC 60825.
CAUTION: Performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
This label is attached to the laser scanner unit inside the machine and is not in a user
access area.
The labels shown below are attached on the rear side of the machine.
Legal and Safety
OPERATION GUIDE xvii
Safety Instructions Regarding the Disconnection of Power (Europe)
CAUTION: The power plug is the main isolation device! Other switches on the
equipment are only functional switches and are not suitable for isolating the
equipment from the power source.
VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter
auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, um
den Stromfluß im Gerät zu unterbrechen.
DECLARATION OF CONFORMITY
TO
89/336/EEC, 73/23/EEC and 93/68/EEC
We declare under our sole responsibility that the product to which
this declaration relates is in conformity with the following specifications.
Limits and methods of measurement for immunity
characteristics of information technology equipment EN55024
Limits and methods of measurement for radio
interference characteristics of information technology
equipment
EN55022 Class B
Limits for harmonic currents emissions
for equipment input current 16A per phase
EN61000-3-2
Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current 16A
EN61000-3-3
Safety of information technology equipment,
including electrical equipment EN60950
Radiation Safety of laser products, equipment
classification, requirements and user’s guide EN60825-1
Legal and Safety
xviii OPERATION GUIDE
Safety of Laser Beam (USA)
1. Safety of laser beam
This copier has been certified by the manufacturer to Class 1 level under the
radiation performance standards established by the U.S.DHHS (Department of
Health and Human Services) in 1968. This indicates that the product is safe to use
during normal operation and maintenance. The laser optical system, enclosed in a
protective housing and sealed within the external covers, never permits the laser
beam to escape.
2. The CDRH Act
A laser-product-related act was implemented on Aug. 2, 1976, by the Center for
Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
(FDA). This act prohibits the sale of laser products in the U.S. without certification,
and applies to laser products manufactured after Aug. 1, 1976. The label shown
below indicates compliance with the CDRH regulations and must be attached to
laser products marketed in the United States. On this copier, the label is on the rear.
3. Optical unit
When checking the optical unit, avoid direct exposure to the laser beam, which is
invisible.
Shown at left is the label located on the cover of the optical unit.
4. Maintenance
For safety of the service personnel, follow the maintenance instructions in the other
section of this manual.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90

KYOCERA CS-1820 Specification

Category
Copiers
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI