Front Runner JCHO019 Installation guide

Brand
Front Runner
Model
JCHO019
Type
Installation guide

Front Runner JCHO019 Vertical Jerry Can Holder is a secure and convenient way to transport and store jerry cans on your vehicle. Made from durable materials, it can be mounted to the side or base of your vehicle, and it comes with a Jerry Can Strap to keep the can securely in place. The Vertical Jerry Can Holder is easy to install and use, and it's a great way to keep your jerry cans organized and out of the way.

FEATURES:

  • Durable construction
  • Side or base mounting options
  • Jerry Can Strap included
  • Easy installation

BENEFITS:

  • Securely transports and stores jerry cans
  • Keeps jerry cans organized and out of the way

Front Runner JCHO019 Vertical Jerry Can Holder is a secure and convenient way to transport and store jerry cans on your vehicle. Made from durable materials, it can be mounted to the side or base of your vehicle, and it comes with a Jerry Can Strap to keep the can securely in place. The Vertical Jerry Can Holder is easy to install and use, and it's a great way to keep your jerry cans organized and out of the way.

FEATURES:

  • Durable construction
  • Side or base mounting options
  • Jerry Can Strap included
  • Easy installation

BENEFITS:

  • Securely transports and stores jerry cans
  • Keeps jerry cans organized and out of the way
JCHO019_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
front runner
JCHO019
ENG
1
Thank you for purchasing a Front Runner Vertical Jerry Can Holder.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
VERTICAL JERRY CAN HOLDER
JCHO019_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
2
TOOLS NEEDED
FIGURE 1.1
GET ORGANIZED
1
IN THE BOX
1
9
7
6
8
1 1 X Jerry Can Strap
2 1 X Jerry Can Base
3 4 X M8 Nyloc Nut
4 4 X M8 Flat Washer
5 4 X M8 x 20 Countersink Socket Screw
6 2 X M4 Nyloc Nut
7 2 X M4 x 9 x 0.8SS Flat Washer
8 2 X M4 x 10 Button Head Bolt
9 1 X Latch With Safety Catch
2.5mm
5mm
7mm
13mm
3
4
5
2
7
7
JCHO019_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
7mm
If needed, adjust the Latch (Item 9) using
two M4 x 10 Button Heads, two M4 Flat
Washers and two M4 Nyloc Nuts (Items 6, 7
& 8) before fully tightening.
SIDE MOUNTING OF VERTICAL JERRY CAN
Decide on the location that you would like to
mount the Vertical Jerry Can Holder.
Mark the four holes using a marker and drill
the holes using a 8.5mm drill bit.
Mount the Vertical Jerry Can Holder using
four M8 x 20 Countersink Screws, four
M8 Flat Washers and four M8 Nyloc nuts
(Items 5, 4 & 3) .
1
3
4
5
2.5mm
13mm
5mm
BASE MOUNTING OF VERTICAL JERRY CAN
Decide on the location that you would like to
mount the Vertical Jerry Can Holder.
Mark the four holes using a marker and drill
the holes using a 8.5mm drill bit.
Mount the Vertical Jerry Can Holder using
four M8 x 20 Countersink Screws, four
M8 Flat Washers and four M8 Nyloc nuts
(Items 5, 4 & 3) .
13mm
5mm
5
4
3
6
7
9
8
77
JCHO019_REV _A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
4
1
2
FIT AND SECURE 2
2.4
7mm
2.5mm
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
Slot the Jerry Can Strap (Item 1) into
the Vertical Jerry Can Holder (Item 2) to
complete assembly.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Front Runner JCHO019 Installation guide

Brand
Front Runner
Model
JCHO019
Type
Installation guide

Front Runner JCHO019 Vertical Jerry Can Holder is a secure and convenient way to transport and store jerry cans on your vehicle. Made from durable materials, it can be mounted to the side or base of your vehicle, and it comes with a Jerry Can Strap to keep the can securely in place. The Vertical Jerry Can Holder is easy to install and use, and it's a great way to keep your jerry cans organized and out of the way.

FEATURES:

  • Durable construction
  • Side or base mounting options
  • Jerry Can Strap included
  • Easy installation

BENEFITS:

  • Securely transports and stores jerry cans
  • Keeps jerry cans organized and out of the way
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents