2. Article
  3. SKU14574

Article SKU14574, SKU12816 Assembly Instructions

  • Hello! I am your chat assistant. I've analyzed the provided Assembly Instructions for the ARTICLE. TIMBER Chair. This document includes useful guidance from the parts inventory to the proper steps of assembling this chair, including instructions on tightening bolts for stability and the order of cushion placement. I'm ready to answer any questions you might have about the assembly process or the chair itself.
  • What should I use as a surface when assembling the chair?
    How often should I check the bolts on the chair?
    What is the correct order of inserting the chair cushions?
Assembly Instructions
TIMBER
Chair
VERSION 1.2
TIME # OF PEOPLE
1
DIFFICULTY
15 min
Page 2 of 4
TIMBER Chair
PARTS INVENTORY
ID DESCRIPTION QTY
LEGS 4
ALLEN KEY 1
M10 × 60MM BOLT 4
LOCK WASHER 4
WASHER 4
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Hardware may loosen over time, check
the bolts regularly and tighten if necessary.
Page 3 of 4TIMBER Chair
1
Legs are stored under chair
in zippered compartment.
× 4
Align dowels and insert
legs (A) into chair first.
!
Insert bolt (C) and washers
(D/E) through hole on legs.
Do not fully tighten right away.
!
100%
85%
50%
Page 4 of 4TIMBER Chair
2
Check leg angles are all
correct before fully tightening.
Fully tightened bolts ensure leg
stability when moving chair.
Place side cushions on chair first
before inserting seat cushion.
!
!
100%
85%50%
/