Stonegate WT-SB214 Owner's manual

Type
Owner's manual
STEP 2
Insert four Wooden Dowels (J), two
each side, into the top edges of
Front Board (A) and Back Board
(B). Lining up the Wooden Dowels
(J), attach Left Side Board (C1) and
Right Side Board (C2) together with
Front Board (A) and Back Board
(B) using eight Bolts, from Bolt and
Cam Lock Nut Set (F), four each
side, to secure.
STEP 3
Attach the three hinges which are
pre-assembled on the top of Back
Board (B) to the bottom of Top
Board (D) using nine Self-Tapping-
Screws (I), three for each hinge.
STEP 4
Attach the Left Spring Hinge (G) to
the Top Board (D) and Left Side
Board (C1) using four Self-Tapping
Screws (I). Repeat to attach the
Right Spring Hinge (H) to the Top
Board (D) and Right Side Board
(C2).
STEP 5
Insert the two Bottom Supports (E)
into the bottom of the assembled
storage box.
Assembly Complete.
Made In China
STEP 1
Insert eight Cam Lock Nuts from
the Bolt and Cam Lock Nut Set (F)
into the holes on the Front Board
(A) and Back Board (B). Make sure
the slotted end of the Cam Lock
Nut is facing out.
PREPARATION
ŸDo not throw away any packaging
until assembly is complete.
ŸAssemble product on a soft surface
so as to not scratch or damage the
item.
ŸFor ease of assembly, 2 people are
recommended.
ŸKeep small parts and packaging
away from children and pets.
ŸSolid wood such as this has knots,
marks and cracking which are
normal and should be considered
an enhancement to the natural
beauty of this product.
ŸDo not completely tighten screws
until the storage box is fully
assembled on a level surface.
Wooden Deck Box Assembly Instructions
PARTS LIST QTY
A Front Board 1 pc
B Back Board 1 pc
C1 Left Side Board 1 pc
C2 Right Side Board 1 pc
D Top Board 1 pc
E Bottom Support 2 pcs
F Bolt and Cam Lock Nut Set 8 pcs
G Left Spring Hinge 1 pc
H Right Spring Hinge 1 pc
I Self-Tapping Screw 17 pcs
J Wooden Dowels 4 pcs
  • Page 1 1

Stonegate WT-SB214 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI