Gigabyte G190-H44 Installation guide

Intel VCA Card Installaon Guide

Parts Kit Part Number: 25HB2-G19033-U1R

REAR WIN X 2PCS

FRONT R X 1PCS

FRONT L X 1PCS

SUPPORT R X2PCS

SUPPORT L X2PCS

B:M3 FLAT 5L PIN#2 X 24PCS

D:#6-32 FLAT 5L PIN#2 X 8PCS

E:#6-32 PAN 5L PIN#2 X 10PCS

DEE

Support Bracket Part List Screw Type List

1. Remove the card side cover. 2. Remove all support brackets and handle.

3. Remove the securing screw on the

riser bracket and li up the it

out of system.

7. Install the VCA card to system

and secure the card with screws.

4. Aach the support brackets to GPU card

and secure the brackets with screws.

5. Install DIMMs and replace the card side cover.

6. Aach the support bracket to the side cover

and secure the side cover with screws.