2. Gigabyte
  3. G190-H44

Gigabyte G190-H44 Installation guide

  • Hello! I have reviewed the Intel VCA Card Installation Guide for the 25HB2-G19033-U1R model. This guide provides detailed instructions for installing the card, including steps for removing components, attaching support brackets, and securing the card using various screw types listed. I'm ready to assist you with any questions you might have about the installation procedure.
  • What is the first step in installing the VCA card?
    What should be done after the card side cover is removed?
    What is the next step after removing support brackets?
Intel VCA Card Installaon Guide
Parts Kit Part Number: 25HB2-G19033-U1R
REAR WIN X 2PCS
FRONT R X 1PCS
FRONT L X 1PCS
SUPPORT R X2PCS
SUPPORT L X2PCS
B:M3 FLAT 5L PIN#2 X 24PCS
D:#6-32 FLAT 5L PIN#2 X 8PCS
E:#6-32 PAN 5L PIN#2 X 10PCS
12
4
4
6
6
4
6
6
4
5
5
5
5
D
D
D
D
D
D
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
BB
BB
BB
D
DEE
EE
Support Bracket Part List Screw Type List
1. Remove the card side cover. 2. Remove all support brackets and handle.
3. Remove the securing screw on the
riser bracket and li up the it
out of system.
7. Install the VCA card to system
and secure the card with screws.
4. Aach the support brackets to GPU card
and secure the brackets with screws.
5. Install DIMMs and replace the card side cover.
6. Aach the support bracket to the side cover
and secure the side cover with screws.
/